commit 1ca6f60347657a645fb799bc27cab9c5a05aad64
parent 976dfba42458134601bd5a69d21fa0516baf272a
Author: aabacchus <ben@bvnf.space>
Date: Fri, 15 Oct 2021 20:03:36 +0100
neomutt: 20211015
turns out we can make the manpages without an internet connection.
this ./configures as if it would build the docs, so that the Makefile contains the logic
required to build the manpages, but then the all-docs target is removed from ALL_TARGETS.
We later call make separately just to build what we want.
Diffstat:
7 files changed, 15 insertions(+), 9936 deletions(-)
diff --git a/neomutt/build b/neomutt/build
@@ -12,22 +12,25 @@ sed -i 's/tinfow tinfo/tinfow tinfo terminfo/g' auto.def
--lmdb \
--disable-nls \
--disable-idn \
- --disable-doc \
--zlib \
--zstd
+# Don't actually build the docs (some of the xsltproc html stuff requires
+# an internet connection)
+sed '/^.*_TARGETS=/s/ .*-docs//' Makefile > _
+mv _ Makefile
+
make
+make docs/neomuttrc docs/neomutt.1 docs/neomuttrc.5
make DESTDIR="$1" install
-# Install the man pages.
-# The neomutt.1 and neomuttrc.5 are usually generated (when running
-# ./configure without --disable-doc) but this requires an internet
-# connection (!?), so I've included them as local sources. The other
-# ones are provided in the tarball.
+# Install the man pages and /etc/neomuttrc.
mkdir -p \
+ "$1/etc" \
"$1/usr/share/man/man1" \
"$1/usr/share/man/man5"
+cp -f docs/neomuttrc "$1/etc"
cp -f docs/neomutt.1 \
docs/pgpewrap.1 \
docs/smime_keys.1 \
diff --git a/neomutt/checksums b/neomutt/checksums
@@ -1,3 +1 @@
-77e177780fc2d8abb475d9cac4342c7e61d53c243f6ce2f9bc86d819fc962cdb
-90f180684dd3a0a30738fd2fa3c571a30999d5d4a01aa5632310a5692260b4df
-7401991898d187e26729cf8df1ccd671572da6830f318444da0644e6cab5fc2c
+26d53e5cd087671afe12e9097a15bdbe7ffe2669b6390c68e6ff37409d119275
diff --git a/neomutt/files/neomutt.1 b/neomutt/files/neomutt.1
@@ -1,589 +0,0 @@
-'\" t
-.\" -*- nroff -*-
-.\"
-.\"
-.\" Copyright (C) 1996-2020 Michael R. Elkins <me@cs.hmc.edu>
-.\"
-.\" This program is free software; you can redistribute it and/or modify
-.\" it under the terms of the GNU General Public License as published by
-.\" the Free Software Foundation; either version 2 of the License, or
-.\" (at your option) any later version.
-.\"
-.\" This program is distributed in the hope that it will be useful,
-.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
-.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-.\" GNU General Public License for more details.
-.\"
-.\" You should have received a copy of the GNU General Public License
-.\" along with this program; if not, write to the Free Software
-.\" Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-.\"
-.TH neomutt 1 "2021-02-05" Unix "User Manuals"
-.\" --------------------------------------------------------------------
-.SH NAME
-.\" --------------------------------------------------------------------
-neomutt \- The NeoMutt Mail User Agent (MUA)
-.
-.\" --------------------------------------------------------------------
-.SH SYNTAX
-.\" --------------------------------------------------------------------
-.SY neomutt
-.OP \-Enx
-.OP \-e command
-.OP \-F config
-.OP \-H draft
-.OP \-i include
-.br
-.OP \-b address
-.OP \-c address
-.OP \-s subject
-.RB [ \-a
-.IR file " [" .\|.\|.\& ]
-.BR \-\- ]
-.IR address " [" .\|.\|.\& ]
-.YS
-.
-.SY neomutt
-.OP \-nx
-.OP \-e command
-.OP \-F config
-.OP \-b address
-.OP \-c address
-.br
-.OP \-s subject
-.RB [ \-a
-.IR file " [" .\|.\|.\& ]
-.BR \-\- ]
-.IR address " [" .\|.\|.\& "] < message"
-.YS
-.
-.SY neomutt
-.OP \-nRy
-.OP \-e command
-.OP \-F config
-.OP \-f mailbox
-.OP \-m type
-.YS
-.
-.SY neomutt
-.OP \-n
-.OP \-e command
-.OP \-F config
-.BI \-A " alias"
-.YS
-.
-.SY neomutt
-.OP \-n
-.OP \-e command
-.OP \-F config
-.BR \-B
-.YS
-.
-.SY neomutt
-.OP \-n
-.OP \-e command
-.OP \-F config
-.BR \-D " [" \-S ] " [" \-O ]
-.YS
-.
-.SY neomutt
-.OP \-n
-.OP \-e command
-.OP \-F config
-.BI \-d " level"
-.BI \-l " file"
-.YS
-.
-.SY neomutt
-.OP \-n
-.OP \-e command
-.OP \-F config
-.BI \-G
-.YS
-.
-.SY neomutt
-.OP \-n
-.OP \-e command
-.OP \-F config
-.BI \-g " server"
-.YS
-.
-.SY neomutt
-.OP \-n
-.OP \-e command
-.OP \-F config
-.BI \-p
-.YS
-.
-.SY neomutt
-.OP \-n
-.OP \-e command
-.OP \-F config
-.BI \-Q " variable [" \-O ]
-.YS
-.
-.SY neomutt
-.OP \-n
-.OP \-e command
-.OP \-F config
-.BI \-Z
-.YS
-.
-.SY neomutt
-.OP \-n
-.OP \-e command
-.OP \-F config
-.BI \-z
-.OP \-f mailbox
-.YS
-.
-.SY neomutt
-.BR \-v [ v ]
-.YS
-.
-.\" --------------------------------------------------------------------
-.SH DESCRIPTION
-.\" --------------------------------------------------------------------
-.PP
-NeoMutt is a small but very powerful text based program for reading and sending
-electronic mail under Unix operating systems, including support for color
-terminals, MIME, OpenPGP, and a threaded sorting mode.
-.
-.PP
-.B Note:
-This manual page gives a brief overview of NeoMutt's command line options. You
-should find a copy of the full manual in \fI/usr/share/doc/neomutt\fP, in plain text,
-HTML, and/or PDF format.
-.
-.\" --------------------------------------------------------------------
-.SH OPTIONS
-.\" --------------------------------------------------------------------
-.TP
-.BI \-\-
-Special argument forces NeoMutt to stop option parsing and treat remaining
-arguments as \fIaddress\fPes even if they start with a dash
-.
-.TP
-.BI \-A " alias"
-Print an expanded version of the given \fIalias\fP to stdout and exit
-.
-.TP
-.BI \-a " file"
-Attach one or more \fIfile\fPs to a message (must be the last option). Add any
-addresses after the \(aq\fB\-\-\fP\(aq argument, e.g.:
-.RS
-.IP
-.EX
-.BI "neomutt \-a " "image.jpg " "\-\- " "address1 "
-.BI "neomutt \-a " "image.jpg *.png " "\-\- " "address1 address2 "
-.EE
-.RE
-.IP
-.
-.TP
-.BI \-B
-Run in batch mode (do not start the ncurses UI)
-.
-.TP
-.BI \-b " address"
-Specify a blind carbon copy (Bcc) recipient
-.
-.TP
-.BI \-c " address"
-Specify a carbon copy (Cc) recipient
-.
-.TP
-.BI \-D
-Dump all configuration variables as
-.RB \(aq name = value \(aq
-pairs to stdout
-.
-.TP
-.BI \-D\ \-O
-Like \fB\-D\fP, but show one-liner documentation
-.
-.TP
-.BI \-D\ \-S
-Like \fB\-D\fP, but hide the value of sensitive variables
-.
-.TP
-.BI \-d " level"
-Log debugging output to a file (default is \(dq\fI~/.neomuttdebug0\fP\(dq).
-The \fIlevel\fP can range from 1\(en5 and affects verbosity (a value of 2 is
-recommended)
-.IP
-Using this option along with \fB\-l\fP is useful to log the early startup
-process (before reading any configuration and hence $debug_level and
-$debug_file)
-.
-.TP
-.BI \-E
-Edit \fIdraft\fP (\fB\-H\fP) or \fIinclude\fP (\fB\-i\fP) file during message
-composition
-.
-.TP
-.BI \-e " command"
-Specify a \fIcommand\fP to be run after reading the config files
-.
-.TP
-.BI \-F " config"
-Specify an alternative initialization file to read, see \fIFILES\fP section
-below for a list of regular configuration files
-.
-.TP
-.BI \-f " mailbox"
-Specify a \fImailbox\fP (as defined with \fBmailboxes\fP command) to load
-.
-.TP
-.BI \-G
-Start NeoMutt with a listing of subscribed newsgroups
-.
-.TP
-.BI \-g " server"
-Like \fB\-G\fP, but start at specified news \fIserver\fP
-.
-.BI \-H " draft"
-Specify a \fIdraft\fP file which contains header and body to use to send a
-message.
-If \fIdraft\fP is \*(lq\fB\-\fP\*(rq, then data is read from stdin.
-The draft file is expected to contain just an RFC822 email \(em headers and a body.
-Although it is not an mbox file, if an mbox "\fBFrom\~\fP" line is present,
-it will be silently discarded.
-.
-.TP
-.BI \-h
-Print this help message and exit
-.
-.TP
-.BI \-i " include"
-Specify an \fIinclude\fP file to be embedded in the body of a message
-.
-.TP
-.BI \-l " file"
-Specify a \fIfile\fP for debugging output (default
-\(dq\fI~/.neomuttdebug0\fP\(dq)
-.IP
-This overrules $debug_file setting and NeoMutt keeps up to five debug logs
-.RI "({ " file " | $debug_file | " ~/.neomuttdebug " }[" 0 - 4 ])
-before override the oldest file
-.
-.TP
-.BI \-m " type"
-Specify a default mailbox format \fItype\fP for newly created folders
-.IP
-The \fItype\fP is either MH, MMDF, Maildir or mbox (case-insensitive)
-.
-.TP
-.BI \-n
-Do not read the system-wide configuration file
-.
-.TP
-.BI \-p
-Resume a prior postponed message, if any
-.
-.TP
-.BI \-Q " variable"
-Query a configuration \fIvariable\fP and print its value to stdout (after the
-config has been read and any commands executed).
-Add -O for one-liner documentation.
-.
-.TP
-.BI \-R
-Open mailbox in read-only mode
-.
-.TP
-.BI \-s " subject"
-Specify a \fIsubject\fP (must be enclosed in quotes if it has spaces)
-.
-.TP
-.BI \-v
-Print the NeoMutt version and compile-time definitions and exit
-.
-.TP
-.BI \-vv
-Print the NeoMutt license and copyright information and exit
-.
-.TP
-.BI \-y
-Start NeoMutt with a listing of all defined mailboxes
-.
-.TP
-.BI \-Z
-Open the first mailbox with new message or exit immediately with exit code 1 if
-none is found in all defined mailboxes
-.
-.TP
-.BI \-z
-Open the first or specified (\fB\-f\fP) mailbox if it holds any message or exit
-immediately with exit code 1 otherwise
-.
-.\" --------------------------------------------------------------------
-.SH ENVIRONMENT
-.\" --------------------------------------------------------------------
-.TP
-.SM
-.B EDITOR
-Specifies the editor to use if \fIVISUAL\fP is unset. Defaults to the \fBVi\fP
-editor if unset.
-.
-.TP
-.SM
-.B EGDSOCKET
-For OpenSSL since version 0.9.5, files, mentioned at \fIRANDFILE\fP below, can
-be Entropy Gathering Daemon (EGD) sockets. Also, and if exists,
-\fI~/.entropy\fP and \fI/tmp/entropy\fP will be used to initialize SSL library
-functions. Specified sockets must be owned by the user and have permission of
-600 (octal number representing).
-.
-.TP
-.SM
-.B EMAIL
-The user's email address.
-.
-.TP
-.SM
-.B HOME
-Full path of the user's home directory.
-.
-.TP
-.SM
-.B MAIL
-Full path of the user's spool mailbox.
-.
-.TP
-.SM
-.B MAILCAPS
-Path to search for mailcap files. If unset, a RFC1524 compliant search path
-that is extended with NeoMutt related paths (at position two and three):
-.\" .RS
-.\" .IP
-.RI \(dq \
-"$HOME/\:.mailcap" \:: \
-"/usr/share/neomutt/\:mailcap" \:: \
-"/etc/\:mailcap" \:: \
-"/etc/\:mailcap" \:: \
-"/usr/\:etc/\:mailcap" \:: \
-"/usr/\:local/\:etc/\:mailcap" \(dq
-.\" .RE
-.\" .IP
-will be used instead.
-.
-.TP
-.SM
-.B MAILDIR
-Full path of the user's spool mailbox if \fIMAIL\fP is unset. Commonly used
-when the spool mailbox is a
-.BR maildir (5)
-folder.
-.
-.TP
-.SM
-.B MM_NOASK
-If this variable is set, mailcap are always used without prompting first.
-.
-.TP
-.SM
-.B NNTPSERVER
-Similar to configuration variable $news_server, specifies the domain name or
-address of the default NNTP server to connect. If unset,
-\fI/etc/nntpserver\fP is used but can be overridden by command line
-option \fB\-g\fP.
-.
-.TP
-.SM
-.B RANDFILE
-Like configuration variable $entropy_file, defines a path to a file which
-includes random data that is used to initialize SSL library functions. If
-unset, \fI~/.rnd\fP is used. DO NOT store important data in the specified file.
-.
-.TP
-.SM
-.B REPLYTO
-When set, specifies the default Reply-To address.
-.
-.TP
-.SM
-.B TEXTDOMAINDIR
-Defines an absolute path corresponding to \fI/usr/share/locale\fP that will
-be recognised by GNU
-.BR gettext (1)
-and used for Native Language Support (NLS) if enabled.
-.
-.TP
-.SM
-.B TMPDIR
-Directory in which temporary files are created. Defaults to \fI/tmp\fP if
-unset. Configuration variable $tmpdir takes precedence over this one.
-.
-.TP
-.SM
-.B VISUAL
-Specifies the editor to use when composing messages.
-.
-.TP
-.SM
-.B XDG_CONFIG_DIRS
-Specifies a X Desktop Group (XDG) compliant location for the system-wide
-configuration file, as described in \fIFILES\fP section below. This variable
-defaults to \fI/etc/xdg\fP. Bypass loading with command line option \fB\-n\fP.
-.
-.TP
-.SM
-.B XDG_CONFIG_HOME
-Specifies a XDG compliant location for the user-specific configuration file, as
-described in \fIFILES\fP section below. This variable defaults to
-\fI$HOME/.config\fP. Can be overridden by command line option \fB\-F\fP.
-.
-.\" --------------------------------------------------------------------
-.SH FILES
-.\" --------------------------------------------------------------------
-.SS "\s-1Configuration files\s0"
-.\" --------------------------------------------------------------------
-.PP
-NeoMutt will read just the first found configuration file of system-wide and
-user-specific category, from the list below and in that order.
-.
-.PP
-But it allows building of a recursive configuration by using the \fBsource\fP
-command.
-.
-.PP
-.na
-.TS
-allbox tab(|);
-cb cb cb
-r lxi lxi .
-\0#N|system-wide|user-specific
-1|T{
-\%$XDG_CONFIG_DIRS/\:neomutt/\:neomuttrc
-T}|T{
-\%$XDG_CONFIG_HOME/\:neomutt/\:neomuttrc
-T}
-2|T{
-\%$XDG_CONFIG_DIRS/\:neomutt/\:Muttrc \fB*\fP\fR)\fP
-T}|T{
-\%$XDG_CONFIG_HOME/\:neomutt/\:muttrc
-T}
-3|T{
-\%/etc/\:neomuttrc
-T}|T{
-\%$XDG_CONFIG_HOME/\:mutt/\:neomuttrc
-T}
-4|T{
-\%/etc/\:Muttrc \fB*\fP\fR)\fP
-T}|T{
-\%$XDG_CONFIG_HOME/\:mutt/\:muttrc
-T}
-5|T{
-\%/usr/share/neomutt/\:neomuttrc
-T}|T{
-\%~/\:.neomutt/\:neomuttrc
-T}
-6|T{
-\%/usr/share/neomutt/\:Muttrc \fB*\fP\fR)\fP
-T}|T{
-\%~/\:.neomutt/\:muttrc
-T}
-.T&
-r c li .
-7|\(em|~/.mutt/neomuttrc
-8|\(em|~/.mutt/muttrc
-9|\(em|~/.neomuttrc
-10|\(em|~/.muttrc
-.T&
-l s s .
-\0\fB*\fP) Note the case of the filename
-.TE
-.PP
-.ad
-.
-.SS "\s-1Other relevant files\s0"
-.\" --------------------------------------------------------------------
-.PP
-Unless otherwise stated, NeoMutt will process all grouped files in the order
-(from top to bottom) as they are specified in that listing.
-.
-.TP
-.IR "~/.mailcap"
-.TQ
-.IR "/etc/mailcap"
-User-specific and system-wide definitions for handling non-text MIME types,
-look at environment variable \fBMAILCAPS\fP above for additional search
-locations.
-.
-.TP
-.IR "~/.neomuttdebug0"
-User's default debug log file. For further details or customising file path see
-command line options \fB\-d\fP and \fB\-l\fP above.
-.
-.TP
-.IR "/etc/mime.types"
-.TQ
-.IR "/etc/mime.types"
-.TQ
-.IR "/usr/share/neomutt/mime.types"
-.TQ
-.IR "~/.mime.types"
-Description files for simple plain text mapping between MIME types and filename
-extensions. NeoMutt parses these files in the stated order while processing
-attachments to determine their MIME type.
-.
-.TP
-.IR "/usr/share/doc/neomutt/manual." { html , pdf , txt }
-The full NeoMutt manual in HTML, PDF or plain text format.
-.
-.TP
-.IR "/tmp/neomutt-XXXX-XXXX-XXXX"
-Temporary files created by NeoMutt. For custom locations look at description of
-the environment variable \fBTMPDIR\fP above. Notice that the suffix
-\fI-XXXX-XXXX-XXXX\fP is just a placeholder for, e.g. hostname, user name/ID,
-process ID and/or other random data.
-.
-.\" --------------------------------------------------------------------
-.SH BUGS
-.\" --------------------------------------------------------------------
-.PP
-See issue tracker at <https://github.com/neomutt/neomutt/issues>.
-.
-.\" --------------------------------------------------------------------
-.SH NO WARRANTIES
-.\" --------------------------------------------------------------------
-.PP
-This program is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-.
-.\" --------------------------------------------------------------------
-.SH SEE ALSO
-.\" --------------------------------------------------------------------
-.PP
-.\" sorted by category and name
-.BR gettext (1),
-.BR msmtp (1),
-.BR notmuch (1),
-.BR sendmail (1),
-.BR smail (1),
-.BR RAND_egd (3),
-.BR curses (3),
-.BR ncurses (3),
-.BR mailcap (5),
-.BR maildir (5),
-.BR mbox (5),
-.BR neomuttrc (5).
-.
-.PP
-For further NeoMutt information:
-.RS 4
-.TP
-\(bu the full manual, see \fIFILES\fP section above
-.TQ
-\(bu the home page, <https://neomutt.org>
-.RE
-.
-.\" --------------------------------------------------------------------
-.SH AUTHOR
-.\" --------------------------------------------------------------------
-.PP
-Michael Elkins, and others. Use <neomutt-devel@\:neomutt.org> to contact the
-developers.
-.
diff --git a/neomutt/files/neomuttrc.5 b/neomutt/files/neomuttrc.5
@@ -1,9330 +0,0 @@
-'\" t
-.\" -*- nroff -*-
-.\"
-.\" Copyright (C) 1996-2000 Michael R. Elkins <me@cs.hmc.edu>
-.\" Copyright (C) 1999-2000 Thomas Roessler <roessler@does-not-exist.org>
-.\"
-.\" This program is free software; you can redistribute it and/or modify
-.\" it under the terms of the GNU General Public License as published by
-.\" the Free Software Foundation; either version 2 of the License, or
-.\" (at your option) any later version.
-.\"
-.\" This program is distributed in the hope that it will be useful,
-.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
-.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-.\" GNU General Public License for more details.
-.\"
-.\" You should have received a copy of the GNU General Public License
-.\" along with this program; if not, write to the Free Software
-.\" Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-.\"
-.de EX
-.nf
-.ft CW
-..
-.de EE
-.ft
-.fi
-..
-.TH neomuttrc 5 "2021-02-05" Unix "User Manuals"
-.\" --------------------------------------------------------------------
-.SH NAME
-.\" --------------------------------------------------------------------
-neomuttrc \- Configuration file for the NeoMutt Mail User Agent (MUA)
-.
-.\" --------------------------------------------------------------------
-.SH DESCRIPTION
-.\" --------------------------------------------------------------------
-.PP
-A NeoMutt configuration file consists of a series of \(lqcommands\(rq. Each
-line of the file may contain one or more commands. When multiple commands are
-used, they must be separated by a semicolon (\(lq\fB;\fP\(rq).
-.
-.PP
-The hash mark, or pound sign (\(lq\fB#\fP\(rq), is used as a \(lqcomment\(rq
-character. You can use it to annotate your initialization file. All text after
-the comment character to the end of the line is ignored.
-.
-.PP
-Single quotes (\(lq\fB\(aq\fP\(rq) and double quotes (\(lq\fB\(dq\fP\(rq) can
-be used to quote strings which contain spaces or other special characters. The
-difference between the two types of quotes is similar to that of many popular
-shell programs, namely that a single quote is used to specify a literal string
-(one that is not interpreted for shell variables or quoting with a backslash
-[see next paragraph]), while double quotes indicate a string which should be
-evaluated. For example, backticks are evaluated inside of double quotes, but
-not single quotes.
-.
-.PP
-\(lq\fB\(rs\fP\(rq quotes the next character, just as in shells such as Bash
-and Zsh. For example, if you want to put quotes (\(lq\fB\(dq\fP\(rq) inside of
-a string, you can use \(lq\fB\(rs\fP\(rq to force the next character to be
-a literal instead of interpreted character.
-.
-.PP
-\(lq\fB\(rs\(rs\fP\(rq means to insert a literal \(lq\fB\(rs\fP\(rq into the
-line. \(lq\fB\(rsn\fP\(rq and \(lq\fB\(rsr\fP\(rq have their usual C meanings
-of line feed (LF) and carriage return (CR), respectively.
-.
-.PP
-A \(lq\fB\(rs\fP\(rq at the end of a line can be used to split commands over
-multiple lines, provided that the split points don't appear in the middle of
-command names.
-.
-.PP
-It is also possible to substitute the output of a Unix command in an
-initialization file. This is accomplished by enclosing the command in backticks
-(\fB\(ga\fP\fIcommand\fP\fB\(ga\fP).
-.
-.PP
-Unix environment variables can be accessed like the way it is done in shells
-like sh and Bash: Prepend the name of the variable by a dollar
-(\(lq\fB\(Do\fP\(rq) sign.
-.
-.\" --------------------------------------------------------------------
-.SH COMMANDS
-.\" --------------------------------------------------------------------
-.SS "\s-1Configuration Commands\s0"
-.\" --------------------------------------------------------------------
-.PP
-The following are the commands understood by NeoMutt:
-.
-.PP
-.nf
-\fBaccount-hook\fP \fIregex\fP \fIcommand\fP
-.fi
-.IP
-This hook is executed whenever you access a remote mailbox. Useful to adjust
-configuration settings to different IMAP or POP servers.
-.
-.PP
-.nf
-\fBalias\fP [ \fB\-group\fP \fIname\fP ... ] \fIkey\fP \fIaddress\fP [\fB,\fP \fIaddress\fP ... ]
-\fBunalias\fP [ \fB\-group\fP \fIname\fP ... ] { \fB*\fP | \fIkey\fP ... }
-.fi
-.IP
-\fBalias\fP defines a surrogate \fIkey\fP for the given address(es). Each
-\fIaddress\fP will be resolved into either an email address
-(user@\:example.com) or a named email address (User Name <user@\:example.com>).
-The address may be specified in either format, or in the format
-\(lquser@\:example.com (User Name)\(rq.
-.IP
-\fBNote\fP: If you want to create an alias for more than one address, you
-\fBmust\fP separate the addresses with a comma (\(lq\fB,\fP\(rq).
-.IP
-\fBunalias\fP removes the alias corresponding to the given \fIkey\fP or all
-aliases when \(lq\fB*\fP\(rq is used as an argument.
-.IP
-The optional \fB\-group\fP flag causes the address(es) to be added to or
-removed from the \fIname\fPd group.
-.
-.PP
-.nf
-\fBalternates\fP [ \fB\-group\fP \fIname\fP ... ] \fIregex\fP [ \fIregex\fP ... ]
-\fBunalternates\fP [ \fB\-group\fP \fIname\fP ... ] { \fB*\fP | \fIregex\fP ... }
-.fi
-.IP
-\fBalternates\fP is used to inform NeoMutt about alternate addresses where you
-receive mail; you can use regular expressions (\fIregex\fP) to specify
-alternate addresses. This affects NeoMutt's idea about messages from you, and
-messages addressed to you.
-.IP
-\fBunalternates\fP can be used to write exceptions to alternates patterns. To
-remove a regular expression from the alternates list, use the unalternates
-command with exactly the same \fIregex\fP or use \(lq\fB*\fP\(rq to remove all
-entries.
-.IP
-The optional \fB\-group\fP flag causes all of the subsequent regular expressions
-to be added to or removed from the \fIname\fPd group.
-.
-.PP
-.nf
-\fBalternative_order\fP \fImime-type\fP[/\fImime-subtype\fP] [ \fImime-type\fP[/\fImime-subtype\fP] ... ]
-\fBunalternative_order\fP { \fB*\fP | \fImime-type\fP[/\fImime-subtype\fP] ... }
-.fi
-.IP
-\fBalternative_order\fP command permits you to define an order of preference
-that is used by NeoMutt to determine which part of
-a \fBmultipart/\:alternative\fP body to display. A \fImime-subtype\fP of
-\(lq\fB*\fP\(rq matches any \fBmultipart/\:alternative\fP subtype, as does an
-empty \fImime-subtype\fP.
-.IP
-\fBunalternative_order\fP removes entries from the ordered list or deletes the
-entire list when \(lq\fB*\fP\(rq is used as an argument.
-.
-.PP
-.nf
-\fBattachments\fP { \fB+\fP | \fB\-\fP }\fIdisposition\fP \fImime-type\fP
-\fBunattachments\fP { \fB+\fP | \fB\-\fP }\fIdisposition\fP \fImime-type\fP
-.fi
-.IP
-You can make your message index display the number of qualifying attachments in
-each message, or search for messages by attachment count. You also can
-configure what kinds of attachments qualify for this feature with the
-\fBattachments\fP and \fBunattachments\fP commands.
-.IP
-\fIdisposition\fP is the attachment's Content-Disposition type \(em either
-inline or attachment. You can abbreviate this to \fBI\fP or \fBA\fP.
-.IP
-\fImime-type\fP is the MIME type of the attachment you want the command to
-affect. A MIME type is always of the format \fBmajor/minor\fP. The major part
-of \fImime-type\fP must be literal text (or the special token \(lq\fB*\fP\(rq,
-but the minor part may be a regular expression. Therefore, \(lq\fB*/.*\fP\(rq
-matches any MIME type.
-.
-.PP
-.nf
-\fBauto_view\fP \fImime-type\fP[\fB/\fP\fImime-subtype\fP] [ \fImime-type\fP[\fB/\fP\fImime-subtype\fP] ... ]
-\fBunauto_view\fP { \fB*\fP | \fImime-type\fP[\fB/\fP\fImime-subtype\fP] ... }
-.fi
-.IP
-This commands permits you to specify that NeoMutt should automatically convert
-the given \fImime-type\fPs to text/plain when displaying messages. For this to work,
-there must be a
-.BR mailcap (5)
-entry for the given \fImime-type\fP with the \fBcopiousoutput\fP option set.
-A \fImime-subtype\fP of \(lq\fB*\fP\(rq matches any
-\fBmultipart/\:alternative\fP subtype, as does an empty \fImime-subtype\fP.
-.
-.PP
-.nf
-\fBbind\fP \fImap\fP[\fB,\fP\fImap\fP ... ] \fIkey\fP \fIfunction\fP
-\fBunbind\fP { \fB*\fP | \fImap\fP | [\fB,\fP\fImap\fP...]} [ \fIkey\fP ]
-.fi
-.IP
-This command allows you to change the default or define additional key bindings
-(operation invoked when pressing a key).
-.IP
-\fImap\fP specifies in which menu the binding belongs. Multiple \fImap\fPs may
-be specified by separating them with commas (no additional whitespace is
-allowed). The currently defined \fImap\fPs are:
-.BR alias ", " attach ", " browser ", " compose ", " editor ", " generic ", "
-.BR index ", " mix ", " pager ", " pgp ", " postpone ", " query " and " smime "."
-.IP
-\fIkey\fP is the key (or key sequence) you wish to bind, e.g.
-\(lq\fB\(rsCa\fP\(rq for control-A. In addition, \fIkey\fP may be specified as
-a three digit octal number prefixed with a \(lq\fB\(rs\fP\(rq or as a symbolic
-name. The \fB<what-key>\fP function can be used to explore keycode and
-symbolic names for the keys on your keyboard.
-.IP
-\fIfunction\fP specifies which action to take when key is pressed. Note that
-the function name is to be specified without angle brackets.
-.IP
-Missing key sequence in \fBunbind\fP command means unbind all bindings in menus given in \fImap\fP .
-.IP
-For more information on keys and functions, please consult the NeoMutt manual.
-.
-.PP
-.nf
-\fBcharset-hook\fP \fIalias\fP \fIcharset\fP
-\fBiconv-hook\fP \fIcharset\fP \fIlocal-charset\fP
-.fi
-.IP
-\fBcharset-hook\fP defines an \fIalias\fP for a character set. This is useful to
-properly display messages which are tagged with a character set name not known
-to NeoMutt.
-.IP
-\fBiconv-hook\fP defines a system-specific name for a character set. This is
-useful when your system's
-.BR iconv (3)
-implementation does not understand MIME character set names (such as
-\fBiso-8859-1\fP), but instead insists on being fed with
-implementation-specific character set names (such as \fB8859-1\fP). In this
-specific case, you'd put \(lq\fBiconv-hook\fP\~iso-8859-1\~8859-1\(rq into your
-configuration file.
-.
-.PP
-.nf
-\fBcolor\fP \fIobject\fP [ \fIattribute\fP ... ] \fIforeground\fP \fIbackground\fP
-\fBcolor\fP { header | body } [ \fIattribute\fP ... ] \fIforeground\fP \fIbackground\fP \fIregex\fP
-\fBcolor\fP index-object [ \fIattribute\fP ... ] \fIforeground\fP \fIbackground\fP \fIpattern\fP
-\fBcolor\fP compose \fIcomposeobject\fP \fIforeground\fP \fIbackground\fP
-\fBcolor\fP compose \fIcomposeobject\fP [ \fIattribute\fP ... ] \fIforeground\fP \fIbackground\fP
-\fBuncolor\fP { index-object | header | body } { \fB*\fP | \fIpattern\fP ... }
-.fi
-.IP
-If your terminal supports color, these commands can be used to assign
-\fIforeground\fP/\:\fIbackground\fP combinations to certain \fIobject\fPs. The
-currently defined \fIobject\fPs are:
-.BR attach_\:headers ", "
-.BR attachment ", "
-.BR body ", "
-.BR bold ", "
-.BR error ", "
-.BR hdrdefault ", "
-.BR header ", "
-.BR index ", "
-.BR index_\:author ", "
-.BR index_\:collapsed ", "
-.BR index_\:date ", "
-.BR index_\:flags ", "
-.BR index_\:label ", "
-.BR index_\:number ", "
-.BR index_\:size ", "
-.BR index_\:subject ", "
-.BR index_\:tag ", "
-.BR index_\:tags ", "
-.BR indicator ", "
-.BR markers ", "
-.BR message ", "
-.BR normal ", "
-.BR progress ", "
-.BR prompt ", "
-.BR quoted ", "
-.BR quoted\fIN\fP ", "
-.BR search ", "
-.BR signature ", "
-.BR status ", "
-.BR tilde ", "
-.BR tree ", "
-.BR underline "."
-.IP
-If the sidebar is enabled the following \fIobject\fPs are also valid:
-.BR sidebar_\:divider ", "
-.BR sidebar_\:flagged ", "
-.BR sidebar_\:highlight ", "
-.BR sidebar_\:indicator ", "
-.BR sidebar_\:new ", "
-.BR sidebar_\:ordinary ", "
-.BR sidebar_\:spoolfile "."
-.IP
-The \fBbody\fP and \fBheader\fP objects allow you to restrict the colorization
-to a regular expression. The \fBindex-object\fP permits you to select colored
-messages by pattern.
-.IP
-The \fBheader\fP and \fBbody\fP match \fIregex\fP in the header/body of
-a message, \fBindex-object\fP can match \fIpattern\fP in the message index.
-Note that IMAP server-side searches (=b, =B, =h) are not supported for color
-index patterns.
-.IP
-Valid composeobjects include
-.BR header ", " security_encrypt ", " security_sign ", "
-.BR security_both ", " security_none .
-.IP
-Valid colors include:
-.BR default ", "
-.BR black ", "
-.BR red ", "
-.BR green ", "
-.BR yellow ", "
-.BR blue ", "
-.BR magenta ", "
-.BR cyan ", "
-.BR white ", "
-.BR color\fIN\fP "."
-.IP
-Valid attributes include:
-.BR none ", " bold ", " underline ", "
-.BR reverse ", and " standout .
-IP
-The \fBuncolor\fP command can be applied to the index, header and body objects
-only. It removes entries from the list. You must specify the same \fIpattern\fP
-specified in the \fBcolor\fP command for it to be removed. The pattern
-\(lq\fB*\fP\(rq is a special token which means to clear the color list of all
-entries.
-.IP
-For further information on colorization, please consult the NeoMutt manual.
-.
-.PP
-.nf
-\fBcrypt-hook\fP \fIregex\fP \fIkeyid\fP
-.fi
-.IP
-The crypt-hook command provides a method by which you can specify the ID of the
-public key to be used when encrypting messages to a certain recipient. The
-meaning of \fIkeyid\fP is to be taken broadly: This can be a different email
-address, a numerical \fIkeyid\fP, or even just an arbitrary search string. You
-may use multiple \fBcrypt-hook\fPs with the same \fIregex\fP; multiple matching
-\fBcrypt-hook\fPs result in the use of multiple \fIkeyid\fPs for a recipient.
-.TP
-\fBindex-format-hook\fP \fIname\fP [\fB!\fP]\fIpattern\fP \fIformat-string\fP
-This command is used to inject format strings dynamically into
-$index_format based on pattern matching against the current message.
-.IP
-The $index_format expando \fI%@name@\fP specifies a placeholder for
-the injection. Index-format-hooks with the same \fIname\fP are matched
-using \fIpattern\fP against the current message. Matching is done in
-the order specified in the .neomuttrc, with the first match being
-used. The hook's \fIformat-string\fP is then substituted and evaluated.
-.
-.PP
-.nf
-\fBexec\fP \fIfunction\fP [ \fIfunction\fP ... ]
-.fi
-.IP
-This command can be used to execute any \fIfunction\fP. Functions are listed in
-the function reference. \(lq\fBexec\fP \fIfunction\fP\(rq is equivalent to
-\(lq\fBpush\fP <\fIfunction\fP>\(rq.
-.
-.PP
-.nf
-\fBfcc-save-hook\fP \fIpattern\fP \fImailbox\fP
-\fBfcc-hook\fP \fIpattern\fP \fImailbox\fP
-\fBsave-hook\fP \fIpattern\fP \fImailbox\fP
-.fi
-.IP
-\fBfcc-save-hook\fP is a shortcut, equivalent to doing both a \fBfcc-hook\fP
-and a \fBsave-hook\fP with its arguments, including %-expansion on
-\fImailbox\fP according to $index_format.
-.IP
-\fBfcc-hook\fP is used to save outgoing mail in a mailbox other than $record.
-NeoMutt searches the initial list of message recipients for the first matching
-\fIpattern\fP and uses \fImailbox\fP as the default \(lqFcc:\(rq mailbox. If no
-match is found the message will be saved to $record mailbox.
-.IP
-\fBsave-hook\fP is used to override the default mailbox used when saving
-messages. \fImailbox\fP will be used as the default if the message matches
-\fIpattern\fP.
-.IP
-To provide more flexibility and good defaults, NeoMutt applies the expandos of
-$index_format to \fImailbox\fP after it was expanded. See \fIPATTERNS\fP
-section below or consult section \(lq\fBMessage Matching in Hooks\fP\(rq in
-NeoMutt manual for information on the exact format of \fIpattern\fP.
-.
-.PP
-.nf
-\fBfolder-hook\fP \fIregex\fP \fIcommand\fP
-.fi
-.IP
-When NeoMutt enters a folder which matches \fIregex\fP (or, when \fIregex\fP is
-preceded by an exclamation mark, does not match \fIregex\fP), the given
-\fIcommand\fP is executed.
-.IP
-When several \fBfolder-hook\fPs match a given mail folder, they are executed in
-the order given in the configuration file.
-.
-.PP
-.nf
-\fBgroup\fP [ \fB\-group\fP \fIname\fP ... ] { \fB\-rx\fP \fIexpr\fP ... | \fB\-addr\fP \fIaddress\fP ... }
-\fBungroup\fP [ \fB\-group\fP \fIname\fP ... ] { \fB*\fP | \fB\-rx\fP \fIexpr\fP ... | \fB\-addr\fP \fIaddress\fP ... }
-.fi
-.IP
-\fBgroup\fP is used to directly add either addresses or regular expressions to
-the specified group or groups. The different categories of arguments to the
-\fBgroup\fP command can be in any order. The flags \fB\-rx\fP and \fB\-addr\fP
-specify what the following strings (that cannot begin with a hyphen) should be
-interpreted as: either a regular expression or an email address, respectively.
-.IP
-\fBungroup\fP is used to remove addresses or regular expressions from the
-specified group or groups. The syntax is similar to the \fBgroup\fP command,
-however the special character \(lq\fB*\fP\(rq can be used to empty a group of
-all of its contents.
-.IP
-These address groups can also be created implicitly by the \fBalias\fP,
-\fBlists\fP, \fBsubscribe\fP and \fBalternates\fP commands by specifying the
-optional \fB\-group\fP option.
-.IP
-Once defined, these address groups can be used in patterns to search for and
-limit the display to messages matching a group.
-.
-.PP
-.nf
-\fBhdr_order\fP \fIheader\fP [ \fIheader\fP ... ]
-\fBunhdr_order\fP { \fB*\fP | \fIheader\fP ... }
-.fi
-.IP
-With the \fBhdr_order\fP command you can specify an order in which NeoMutt will
-attempt to present these headers to you when viewing messages.
-.IP
-\(lq\fBunhdr_order\~*\fP\(rq will clear all previous headers from the order
-list, thus removing the header order effects set by the system-wide startup
-file.
-.
-.PP
-.nf
-\fBifdef\fP \fIsymbol\fP "\fIconfig-command\fP [ \fIargs\fP ... ]"
-\fBifndef\fP \fIsymbol\fP "\fIconfig-command\fP [ \fIargs\fP ... ]"
-\fBfinish\fP
-.fi
-.IP
-The \fBifdef\fP feature introduces three new commands to NeoMutt and allow you
-to share one config file between versions of NeoMutt that may have different
-features compiled in.
-.IP
-Here a \fIsymbol\fP can be a
-.BR $variable ", <" function ">, " command " or " "compile-time symbol" ", "
-such as \(lq\fBimap\fP\(rq. A list of compile-time \fIsymbol\fPs can be seen in
-the output of the command \(lq\fBneomutt\~\-v\fP\(rq (in the
-\(lq\fBCompile options\fP\(rq section).
-.IP
-\fBfinish\fP is particularly useful when combined with \fBifndef\fP.
-.
-.PP
-.nf
-\fBignore\fP \fIpattern\fP [ \fIpattern\fP ... ]
-\fBunignore\fP { \fB*\fP | \fIpattern\fP ... }
-.fi
-.IP
-The \fBignore\fP command allows you to specify header fields which you don't
-normally want to see in the pager. You do not need to specify the full header
-field name. For example, \(lq\fBignore\fP content-\(rq will ignore all header
-fields that begin with the pattern \(lqcontent-\(rq, \(lq\fBignore\fP\~*\(rq
-will ignore all headers.
-.IP
-To remove a previously added token from the list, use the \fBunignore\fP
-command. For example, \(lq\fBunignore\fP\~*\(rq will remove all tokens from the
-ignore list.
-.
-.PP
-.nf
-\fBlists\fP [ \fB\-group\fP \fIname\fP ... ] \fIregex\fP [ \fIregex\fP ... ]
-\fBunlists\fP [ \fB\-group\fP \fIname\fP ... ] { \fB*\fP | \fIregex\fP ... }
-\fBsubscribe\fP [ \fB\-group\fP \fIname\fP ... ] \fIregex\fP [ \fIregex\fP ... ]
-\fBunsubscribe\fP [ \fB\-group\fP \fIname\fP ... ] { \fB*\fP | \fIregex\fP ... }
-.fi
-.IP
-NeoMutt maintains two lists of mailing list address patterns, a list of
-subscribed mailing lists, and a list of known mailing lists. All subscribed
-mailing lists are known. Patterns use regular expressions.
-.IP
-The \fBlists\fP command adds a mailing list address to the list of known
-mailing lists. The \fBunlists\fP command removes a mailing list from the lists
-of known and subscribed mailing lists.
-.IP
-The \fBsubscribe\fP command adds a mailing list to the lists of known and
-subscribed mailing lists. The \fBunsubscribe\fP command removes it from the
-list of subscribed mailing lists.
-.IP
-The \fB\-group\fP flag adds all of the subsequent regular expressions to the
-\fIname\fPd group.
-.
-.PP
-.nf
-\fBmacro\fP \fImenu\fP[\fB,\fP\fImenu\fP ... ] \fIkey\fP \fIsequence\fP [ \fIdescription\fP ]
-\fBunmacro\fP { \fB*\fP | \fImenu\fP | [\fB,\fP\fImenu\fP...]} [ \fIkey\fP ]
-.fi
-.IP
-This command binds the given \fIsequence\fP of keys to the given \fIkey\fP in
-the given \fImenu\fP or menus. For currently defined menus, see \fBbind\fP
-command above. To specify multiple menus, put only a comma between the menus.
-.IP
-Optionally you can specify a descriptive text after \fIsequence\fP, which is
-shown in the help screens if they contain a \fIdescription\fP.
-.IP
-Missing key sequence in \fBunmacro\fP command means unmacro all macros in menus given in \fImenu\fP.
-.
-.PP
-.nf
-\fBmailboxes\fP \fImailbox\fP [ \fImailbox\fP ... ]
-\fBnamed-mailboxes\fP \fIdescription\fP \fImailbox\fP [\fIdescription\fP \fImailbox\fP ... ]
-\fBunmailboxes\fP { \fB*\fP | \fImailbox\fP ... }
-.fi
-.IP
-The \fBmailboxes\fP specifies folders which can receive mail and which will be
-checked for new messages. When changing folders, pressing space will cycle
-through folders with new mail.
-.IP
-The \fBnamed-mailboxes\fP is an alternative to \fBmailboxes\fP that allows
-adding a description for a mailbox. NeoMutt can be configured to display the
-description instead of the mailbox path.
-.IP
-The \fBunmailboxes\fP command is used to remove a file name from the list of
-folders which can receive mail. If \(lq\fB*\fP\(rq is specified as the file
-name, the list is emptied.
-.
-.PP
-.nf
-\fBmailto_allow\fP { \fB*\fP | \fIheader-field\fP ... }
-\fBunmailto_allow\fP { \fB*\fP | \fIheader-field\fP ... }
-.fi
-.IP
-As a security measure, NeoMutt will only add user-approved \fIheader-field\fPs
-from a \fImailto:\fP URL. This is necessary since NeoMutt will handle certain
-\fIheader-field\fPs, such as \fBAttach\fP, in a special way. The
-\fBmailto_allow\fP and \fBunmailto_allow\fP commands allow the user to modify
-the list of approved headers.
-.IP
-NeoMutt initializes the default list to contain only the \fBSubject\fP and
-\fBBody\fP \fIheader-field\fPs, which are the only requirement specified by the
-\fImailto:\fP specification in RFC2368, and the \fBCc\fP, \fBIn-Reply-To\fP,
-\fBReferences\fP headers to aid with replies to mailing lists.
-.TP
-\fBecho\fP \fImessage\fP
-Prints \fImessage\fP to the message window. After printing the
-message, echo will pause for the number of seconds specified by
-$sleep_time.
-.TP
-\fBcd\fP \fIdirectory\fP
-Changes the current working directory.
-.
-.PP
-.nf
-\fBmbox-hook\fP \fIregex\fP \fImailbox\fP
-.fi
-.IP
-When NeoMutt changes to a mail folder which matches \fIregex\fP, \fImailbox\fP
-will be used as the \(lqmbox\(rq folder, i.e. read messages will be moved to
-that folder when the mail folder is left.
-.IP
-Note that execution of \fBmbox-hook\fPs is dependent on the $move configuration
-variable. If set to \(lqno\(rq (the default), \fBmbox-hook\fPs will not be
-executed.
-.IP
-The first matching \fBmbox-hook\fP applies.
-.
-.PP
-.nf
-\fBmessage-hook\fP \fIpattern\fP \fIcommand\fP
-.fi
-.IP
-Before NeoMutt displays (or formats for replying or forwarding) a message which
-matches the given \fIpattern\fP (or, when it is preceded by an exclamation
-mark, does not match the \fIpattern\fP), the given \fIcommand\fP is executed.
-When multiple \fBmessage-hook\fPs match, they are executed in the order in
-which they occur in the configuration file.
-.
-.PP
-.nf
-\fBmime_lookup\fP \fImime-type\fP[\fB/\fP\fImime-subtype\fP] [ \fImime-type\fP[\fB/\fP\fImime-subtype\fP] ... ]
-\fBunmime_lookup\fP { \fB*\fP | \fImime-type\fP[\fB/\fP\fImime-subtype\fP] ... }
-.fi
-.IP
-This command permits you to define a list of \(lqdata\(rq MIME content types
-for which NeoMutt will try to determine the actual file type from the file
-name, and not use a
-.BR mailcap (5)
-entry given for the original MIME type. For instance, you may add the
-\fBapplication/\:octet-stream\fP MIME type to this list.
-.IP
-In addition, the \fBunmime_lookup\fP command may be used to disable this
-feature for any particular MIME type if it had been set, for example in
-a global \fIneomuttrc\fP.
-.
-.PP
-.nf
-\fBmono\fP \fIobject\fP \fIattribute\fP
-\fBmono\fP { header | body } \fIattribute\fP \fIregex\fP
-\fBmono\fP index-object \fIattribute\fP \fIpattern\fP
-\fBunmono\fP { index-object | header | body } { \fB*\fP | \fIpattern\fP ... }
-.fi
-.IP
-For terminals which don't support color, you can still assign
-attributes to objects.
-.
-.PP
-.nf
-\fBmy_hdr\fP \fIstring\fP
-\fBunmy_hdr\fP { \fB*\fP | \fIfield\fP ... }
-.fi
-.IP
-Using \fBmy_hdr\fP, you can define headers which will be added to the messages
-you compose. \fBunmy_hdr\fP will remove the given user-defined headers.
-.
-.PP
-.nf
-\fBopen-hook\fP \fIregex\fP "\fIshell-command\fP"
-\fBclose-hook\fP \fIregex\fP "\fIshell-command\fP"
-\fBappend-hook\fP \fIregex\fP "\fIshell-command\fP"
-.fi
-.IP
-These commands provide a way to handle compressed folders. The given
-\fIregex\fP specifies which folders are taken as compressed (e.g.
-\(dq\fB\(rs.gz$\fP\(dq). The commands tell NeoMutt how to uncompress a folder
-(\fBopen-hook\fP), compress a folder (\fBclose-hook\fP) or append a compressed
-mail to a compressed folder (\fBappend-hook\fP). The \fIshell-command\fP is a
-.BR printf (3)
-like format string and must contain two placeholders for from (\fB%f\fP) and to
-(\fB%t\fP) filenames which should be placed inside single-quotes to prevent
-unintended shell expansions. Examples:
-.RS
-.IP
-.EX
-.BR append-hook " \(aq" "\(rs.gz$" "\(aq \(dqgzip \-\-stdout \(aq" "%t" "\(aq >> \(aq" "%f" "\(aq\(dq"
-.BR close-hook " \(aq" "\(rs.gz$" "\(aq \(dqgzip \-\-stdout \(aq" "%t" "\(aq > \(aq" "%f" "\(aq\(dq"
-.BR open-hook " \(aq" "\(rs.gz$" "\(aq \(dqgzip \-\-stdout \-\-decompress \(aq" "%f" "\(aq > \(aq" "%t" "\(aq\(dq"
-.EE
-.RE
-.
-.PP
-.nf
-\fBpush\fP \fIstring\fP
-.fi
-.IP
-This command adds the named \fIstring\fP to the beginning of the keyboard
-buffer. The string may contain control characters, key names and function names
-like the sequence string in the \fBmacro\fP command. You may use it to
-automatically run a sequence of commands at startup, or when entering certain
-folders.
-.IP
-For using functions, it's important to use angle brackets (\(lq<\(rq and
-\(lq>\(rq) to make NeoMutt recognize the input as a function name. Otherwise
-it will simulate individual just keystrokes.
-.
-.
-.PP
-.nf
-\fBreply-hook\fP \fIpattern\fP \fIcommand\fP
-\fBsend-hook\fP \fIpattern\fP \fIcommand\fP
-\fBsend2-hook\fP \fIpattern\fP \fIcommand\fP
-.fi
-.IP
-These commands can be used to execute arbitrary configuration commands based
-upon recipients of the message. \fIpattern\fP is used to match the message, see
-section \(lq\fBMessage Matching in Hooks\fP\(rq in manual for details.
-\fIcommand\fP is executed when \fIpattern\fP matches.
-.IP
-\fBreply-hook\fP is matched against the message you are replying to, instead of
-the message you are sending. \fBsend-hook\fP is matched against all messages,
-both new and replies. \fBNote\fP, \fBreply-hook\fPs are matched before the
-\fBsend-hook\fP, regardless of the order specified in the user's configuration
-file.
-.IP
-\fBsend2-hook\fP is matched every time a message is changed, either by editing
-it, or by using the compose menu to change its recipients or subject.
-\fBsend2-hook\fP is executed after \fBsend-hook\fP, and can, e.g., be used to
-set parameters such as the $sendmail variable depending on the message's sender
-address. \fBNote\fP, \fBsend-hook\fPs are only executed once after getting the
-initial list of recipients.
-.
-.PP
-.nf
-\fBscore\fP \fIpattern\fP \fIvalue\fP
-\fBunscore\fP { \fB*\fP | \fIpattern\fP ... }
-.fi
-.IP
-The \fBscore\fP command adds \fIvalue\fP to a message's score if \fIpattern\fP
-matches it. \fIpattern\fP is a string in the format described in the
-\fIPATTERNS\fP section below. \fIvalue\fP is a positive or negative integer.
-A message's final score is the sum total of all matching score entries.
-.IP
-The \fBunscore\fP command removes score entries from the list. You must specify
-the same \fIpattern\fP specified in the \fBscore\fP command for it to be
-removed. The pattern \(lq\fB*\fP\(rq is a special token which means to clear
-the list of all score entries.
-.
-.PP
-.nf
-\fBset\fP { [ \fBno\fP | \fBinv\fP | \fB&\fP | \fB?\fP ]\fIvariable\fP } [ ... ]
-\fBset\fP { \fIvariable\fP=\fIvalue\fP | \fIvariable+=increment\fP | \fIvariable-=decrement\fP } [ ... ]
-\fBunset\fP \fIvariable\fP [ \fIvariable\fP ... ]
-\fBreset\fP \fIvariable\fP [ \fIvariable\fP ... ]
-\fBtoggle\fP \fIvariable\fP [ \fIvariable\fP ... ]
-.fi
-.IP
-These commands are used to set and manipulate configuration \fIvariable\fPs.
-.IP
-NeoMutt knows four basic types of \fIvariable\fPs: boolean, number, string, string
-list and quadoption. Boolean \fIvariable\fPs can be \fBset\fP (true), \fBunset\fP
-(false), or \fBtoggle\fPd. Number \fIvariable\fPs can be assigned a positive
-integer \fIvalue\fP. Value of number \fIvariable\fPs can be incremented "\fB+=\fP"
-and decremented "\fB-=\fP". String list \fIvariable\fPs use "\fB+=\fP" for
-appending increment to the string list and "\fB-=\fP" for removal decrement from
-the string list.
-.IP
-String \fIvariable\fPs consist of any number of printable characters and must
-be enclosed in quotes if they contain spaces or tabs. You may also use the
-escape sequences \(lq\fB\(rsn\fP\(rq and \(lq\fB\(rst\fP\(rq for newline and
-tab, respectively. Content of a string \fIvariable\fPs can be extended using
-"\fB+=\fP"
-.IP
-Quadoption \fIvariable\fPs are used to control whether or not to be prompted
-for certain actions, or to specify a default action. A \fIvalue\fP of \fByes\fP
-will cause the action to be carried out automatically as if you had answered
-\(lqyes\(rq to the question. Similarly, a \fIvalue\fP of \fBno\fP will cause
-the action to be carried out as if you had answered \(lqno\(rq. A \fIvalue\fP
-of \fBask-yes\fP will cause a prompt with a default answer of \(lqyes\(rq and
-\fBask-no\fP will provide a default answer of \(lqno\(rq.
-.IP
-The \fBtoggle\fP command automatically prepends the \(lq\fBinv\fP\(rq prefix to
-all specified \fIvariable\fPs. The \fBunset\fP command automatically prepends
-the \(lq\fBno\fP\(rq prefix to all specified \fIvariable\fPs. If you use the
-command \fBset\fP and prefix the \fIvariable\fP with \(lq\fB&\fP\(rq this has
-the same behavior as the \fBreset\fP command.
-.IP
-The \fBreset\fP command resets all given \fIvariable\fPs to the compile time
-defaults. With the \fBreset\fP command there exists the special \fIvariable\fP
-\fBall\fP, which allows you to reset all \fIvariable\fPs to their system
-defaults.
-.IP
-Using the <\fBenter-command\fP> function, you can query the \fIvalue\fP of
-a \fIvariable\fP by prefixing the name of the \fIvariable\fP with a question
-mark: \(dq:\fBset\~?\fPallow_8bit\(dq.
-.
-.PP
-.nf
-\fBsetenv\fP { \fB?\fP\fIvariable\fP | \fIvariable\fP \fIvalue\fP }
-\fBunsetenv\fP \fIvariable\fP
-.fi
-.IP
-You can alter the environment that NeoMutt passes on to its child processes
-using the \fBsetenv\fP and \fBunsetenv\fP operators.
-.IP
-You can also query current environment \fIvalue\fPs by prefixing a
-\(lq\fB?\fP\(rq character.
-.
-.PP
-.nf
-\fBsidebar_whitelist\fP \fImailbox\fP [ \fImailbox\fP ...]
-\fBunsidebar_whitelist\fP { \fB*\fP | \fImailbox\fP ... }
-.fi
-.IP
-The \fBsidebar_whitelist\fP command specifies \fImailbox\fPes that will always
-be displayed in the sidebar, even if $sidebar_new_mail_only is set and the
-\fImailbox\fP does not contain new mail.
-.IP
-The \fBunsidebar_whitelist\fP command is used to remove a \fImailbox\fP from
-the list of whitelisted \fImailbox\fPes. Use
-\(lq\fBunsidebar_whitelist\~*\fP\(rq to remove all \fImailbox\fPes.
-.
-.PP
-.nf
-\fBsource\fP \fIfilename\fP
-.fi
-.IP
-This command allows the inclusion of initialization commands from other files.
-If the \fIfilename\fP begins with a tilde (\(lq~\(rq), it will be expanded to
-the path of your home directory.
-.IP
-If the \fIfilename\fP ends with a vertical bar (\(lq|\(rq), then \fIfilename\fP
-is considered to be an executable program from which to read input, (e.g.
-\(lq\fBsource\fP\~\fI~/\:bin/\:myscript\fP|\(rq).
-.
-.PP
-.nf
-\fBspam\fP \fIpattern\fP \fIformat\fP
-\fBnospam\fP { \fB*\fP | \fIpattern\fP }
-.fi
-.IP
-NeoMutt has generalized support for external spam-scoring filters. By defining
-your spam \fIpattern\fPs with the \fBspam\fP and \fBnospam\fP commands, you can
-limit, search, and sort your mail based on its spam attributes, as determined
-by the external filter. You also can display the spam attributes in your index
-display using the %H selector in the $index_format variable. (Tip: try
-\(dq%?H?[%H]\~?\(dq to display spam tags only when they are defined for a given
-message).
-.IP
-For further information on spam-scoring filters, please consult the
-section \(lq\fBSpam Detection\fP\(rq in the NeoMutt manual.
-.
-.PP
-.nf
-\fBsubjectrx\fP \fIpattern\fP \fIreplacement\fP
-\fBunsubjectrx\fP { \fB*\fP | \fIpattern\fP }
-.fi
-.IP
-The \fBsubjectrx\fP command specifies a regular expression \fIpattern\fP which,
-if detected in a message subject, causes the subject to be replaced with the
-\fIreplacement\fP value. The \fIreplacement\fP is subject to substitutions in
-the same way as for the \fBspam\fP command: %L for the text to the left of the
-match, %R for text to the right of the match, and %1 for the first subgroup in
-the match (etc). If you simply want to erase the match, set it to \(lq%L%R\(rq.
-Any number of \fBsubjectrx\fP commands may coexist.
-.IP
-Note this well: the \fIreplacement\fP value replaces the entire subject, not
-just the match!
-.IP
-\fBunsubjectrx\fP removes a given \fBsubjectrx\fP from the substitution list.
-If \(lq\fB*\fP\(rq is used as the pattern, all substitutions will be removed.
-.
-.PP
-.nf
-\fBtimeout-hook\fP \fIcommand\fP
-\fBstartup-hook\fP \fIcommand\fP
-\fBshutdown-hook\fP \fIcommand\fP
-.fi
-.IP
-The \fBGlobal Hooks\fP feature introduces these hooks to NeoMutt. They are
-called when global events take place in NeoMutt. \fBstartup-hook\fP and
-\fBshutdown-hook\fP are most likely to be useful to users of
-.BR notmuch (1).
-.IP
-\fBtimeout-hook\fP runs a \fIcommand\fP periodically when NeoMutt checks for
-new mail. This hook is called every $timeout seconds.
-.IP
-Before NeoMutt opens the first mailbox when first starting, NeoMutt will run
-the \fBstartup-hook\fP for the given \fIcommand\fP.
-.IP
-Before NeoMutt is about to exit, and before the mailbox is closed, NeoMutt will
-run the \fBshutdown-hook\fP for the given \fIcommand\fP.
-.
-.PP
-.nf
-\fBunhook\fP { \fB*\fP | \fIhook-type\fP }
-.fi
-.IP
-This command permits you to flush hooks you have previously defined. You can
-either remove all hooks by giving the \(lq\fB*\fP\(rq character as an argument,
-or you can remove all hooks of a specific \fIhook-type\fP by saying something
-like \(lq\fBunhook\fP\~\fIsend-hook\fP\(rq.
-.
-.\" --------------------------------------------------------------------
-.SH PATTERNS
-.\" --------------------------------------------------------------------
-.SS "\s-1Pattern Modifier\s0"
-.\" --------------------------------------------------------------------
-.PP
-Many of NeoMutt's commands allow you to specify a pattern to match messages
-.RB ( limit ", " tag-pattern ", " delete-pattern ", the above mentioned " hook
-commands etc.). The table \(lq\fBPattern modifiers\fP\(rq shows several ways to
-select messages.
-.
-.na
-.TS
-box tab(|);
-lb s | lb
-l s | lx
-.
-\0Pattern|Description
-_
-\0~A|T{
-all messages
-T}
-_
-\0=B \fISTRING\fP|T{
-messages which contain \fISTRING\fP in the whole message. If IMAP is enabled,
-searches for \fISTRING\fP on the server, rather than downloading each message
-and searching it locally.
-T}
-_
-\0=b \fISTRING\fP|T{
-messages which contain \fISTRING\fP in the message body. If IMAP is enabled,
-searches for \fISTRING\fP on the server, rather than downloading each message
-and searching it locally.
-T}
-_
-\0~B \fIEXPR\fP|T{
-messages which contain \fIEXPR\fP in the whole message
-T}
-_
-\0~b \fIEXPR\fP|T{
-messages which contain \fIEXPR\fP in the message body
-T}
-_
-\0%C \fIGROUP\fP|T{
-messages either \(lqTo:\(rq or \(lqCc:\(rq to any member of \fIGROUP\fP
-T}
-_
-\0%c \fIGROUP\fP|T{
-messages carbon-copied to any member of \fIGROUP\fP
-T}
-_
-\0~C \fIEXPR\fP|T{
-messages either \(lqTo:\(rq or \(lqCc:\(rq \fIEXPR\fP
-T}
-_
-\0~c \fIEXPR\fP|T{
-messages carbon-copied to \fIEXPR\fP
-T}
-_
-\0~D|T{
-deleted messages
-T}
-_
-\0~d \fIMIN\fP-\fIMAX\fP|T{
-messages with \(lqdate-sent\(rq in a date range
-T}
-_
-\0%e \fIGROUP\fP|T{
-messages which contain a member of \fIGROUP\fP in the \(lqSender:\(rq field
-T}
-_
-\0~E|T{
-expired messages
-T}
-_
-\0~e \fIEXPR\fP|T{
-messages which contain \fIEXPR\fP in the \(lqSender:\(rq field
-T}
-_
-\0%f \fIGROUP\fP|T{
-messages originating from any member of \fIGROUP\fP
-T}
-_
-\0~F|T{
-flagged messages
-T}
-_
-\0~f \fIEXPR\fP|T{
-messages originating from \fIEXPR\fP
-T}
-_
-\0~G|T{
-cryptographically encrypted messages
-T}
-_
-\0~g|T{
-cryptographically signed messages
-T}
-_
-\0=h \fISTRING\fP|T{
-messages which contain \fISTRING\fP in the message header. If IMAP is enabled,
-searches for \fISTRING\fP on the server, rather than downloading each message
-and searching it locally; \fISTRING\fP must be of the form \(lqHeader:
-substring\(rq (see below).
-T}
-_
-\0~H \fIEXPR\fP|T{
-messages with spam attribute matching \fIEXPR\fP
-T}
-_
-\0~h \fIEXPR\fP|T{
-messages which contain \fIEXPR\fP in the message header
-T}
-_
-\0~i \fIEXPR\fP|T{
-messages which match \fIEXPR\fP in the \(lqMessage-ID:\(rq field
-T}
-_
-\0~k|T{
-messages containing PGP key material
-T}
-_
-\0%L \fIGROUP\fP|T{
-messages either originated or received by any member of \fIGROUP\fP
-T}
-_
-\0~L \fIEXPR\fP|T{
-messages either originated or received by \fIEXPR\fP
-T}
-_
-\0~l|T{
-messages addressed to a known mailing list
-T}
-_
-\0~m <\fIMAX\fP|T{
-messages with numbers less than \fIMAX\fP \fB*\fP)
-T}
-_
-\0~m >\fIMIN\fP|T{
-messages with numbers greater than \fIMIN\fP \fB*\fP)
-T}
-_
-\0~m \fIMIN\fP,\fIMAX\fP|T{
-messages with offsets (from selected message) in the range \fIMIN\fP to
-\fIMAX\fP \fB*\fP)
-T}
-_
-\0~m \fIMIN\fP-\fIMAX\fP|T{
-message in the range \fIMIN\fP to \fIMAX\fP \fB*\fP)
-T}
-_
-\0~m \fIN\fP|T{
-just message number \fIN\fP \fB*\fP)
-T}
-_
-\0~N|T{
-new messages
-T}
-_
-\0~n \fIMIN\fP-\fIMAX\fP|T{
-messages with a score in the range \fIMIN\fP to \fIMAX\fP \fB**\fP)
-T}
-_
-\0~O|T{
-old messages
-T}
-_
-\0~P|T{
-messages from you (consults $from, \fBalternates\fP, and local account/hostname information)
-T}
-_
-\0~p|T{
-messages addressed to you (consults $from, \fBalternates\fP, and local account/hostname information)
-T}
-_
-\0~Q|T{
-messages which have been replied to
-T}
-_
-\0~R|T{
-read messages
-T}
-_
-\0~r \fIMIN\fP-\fIMAX\fP|T{
-messages with \(lqdate-received\(rq in a date range
-T}
-_
-\0~S|T{
-superseded messages
-T}
-_
-\0~s \fIEXPR\fP|T{
-messages having \fIEXPR\fP in the \(lqSubject:\(rq field
-T}
-_
-\0~T|T{
-tagged messages
-T}
-_
-\0~t \fIEXPR\fP|T{
-messages addressed to \fIEXPR\fP
-T}
-_
-\0~U|T{
-unread messages
-T}
-_
-\0~u|T{
-messages addressed to a subscribed mailing list
-T}
-_
-\0~V|T{
-cryptographically verified messages
-T}
-_
-\0~v|T{
-message is part of a collapsed thread.
-T}
-_
-\0~X \fIMIN\fP-\fIMAX\fP|T{
-messages with \fIMIN\fP to \fIMAX\fP attachments \fB**\fP)
-T}
-_
-\0~x \fIEXPR\fP|T{
-messages which contain \fIEXPR\fP in the \(lqReferences:\(rq or
-\(lqIn-Reply-To:\(rq field
-T}
-_
-\0~y \fIEXPR\fP|T{
-messages which contain \fIEXPR\fP in their keywords
-T}
-_
-\0~Y \fIEXPR\fP|T{
-messages whose tags match \fIEXPR\fP
-T}
-_
-\0~z \fIMIN\fP-\fIMAX\fP|T{
-messages with a size in the range \fIMIN\fP to \fIMAX\fP \fB**\fP) \fB***\fP)
-T}
-_
-\0=/ \fISTRING\fP|T{
-IMAP custom server-side search for \fISTRING\fP. Currently only defined for
-Gmail. See section \(lq\fBGmail Patterns\fP\(rq in NeoMutt manual.
-T}
-_
-\0~=|T{
-duplicated messages (see $duplicate_threads)
-T}
-_
-\0~#|T{
-broken threads (see $strict_threads)
-T}
-_
-\0~$|T{
-unreferenced message (requires threaded view)
-T}
-_
-\0~(\fIPATTERN\fP)|T{
-messages in threads containing messages matching \fIPATTERN\fP, e.g. all
-threads containing messages from you: ~(~P)
-T}
-_
-\0~<(\fIPATTERN\fP)|T{
-messages whose immediate parent matches \fIPATTERN\fP, e.g. replies to your
-messages: ~<(~P)
-T}
-_
-\0~>(\fIPATTERN\fP)|T{
-messages having an immediate child matching \fIPATTERN\fP, e.g. messages you
-replied to: ~>(~P)
-T}
-_
-.T&
-l s s .
-T{
-\0Where \fIEXPR\fP is a regular expression, and \fIGROUP\fP is an address group.
-T}
-.T&
-l l s .
-.PP
-\0\fB*\fP)|T{
-The message number ranges (introduced by \(lq\fB~m\fP\(rq) are even
-more general and powerful than the other types of ranges. Read on and see
-section \(lq\fBMessage Ranges\fP\(rq in manual.
-T}
-\0\fB**\fP)|T{
-The forms \(lq<\fIMAX\fP\(rq, \(lq>\fIMIN\fP\(rq, \(lq\fIMIN\fP-\(rq and
-\(lq-\fIMAX\fP\(rq are allowed, too.
-T}
-\0\fB***\fP)|T{
-The suffixes \(lqK\(rq and \(lqM\(rq are allowed to specify
-kilobyte and megabyte respectively.
-T}
-.TE
-.PP
-.ad
-.
-.PP
-Special attention has to be paid when using regular expressions inside of
-patterns. Specifically, NeoMutt's parser for these patterns will strip one
-level of backslash (\(lq\fB\(rs\fP\(rq), which is normally used for quoting. If
-it is your intention to use a backslash in the regular expression, you will
-need to use two backslashes (\(lq\fB\(rs\(rs\fP\(rq) instead.
-.
-.PP
-You can force NeoMutt to treat \fIEXPR\fP as a simple \fISTRING\fP instead of
-a regular expression by using \(lq\fB=\fP\(rq instead of \(lq\fB~\fP\(rq in the
-pattern name. For example, \(lq\fB=b\~*.*\fP\(rq will find all messages that
-contain the literal \fISTRING\fP \(lq\fB*.*\fP\(rq. Simple substring matches
-are less powerful than regular expressions but can be considerably faster. This
-is especially true for IMAP folders, because substring matches can be performed
-on the server instead of by fetching every message. IMAP treats
-\(lq\fB=h\fP\(rq specially: it must be of the form
-\(lqHeader:\~\fIsubstring\fP\(rq and will \fBnot\fP partially match header
-names. The \fIsubstring\fP part may be omitted if you simply wish to find
-messages containing a particular header without regard to its value.
-.
-.PP
-Patterns matching lists of addresses (notably
-.BR c ", " C ", " p ", " P " and " t )
-match if there is at least one match in the whole list. If you want to make
-sure that all elements of that list match, you need to prefix your pattern with
-\(lq\fB^\fP\(rq.
-.
-.PP
-This example matches all mails which only has recipients from Germany.
-.IP
-Matching all addresses in address lists:
-.BI ^~C\~ \(rs.de$
-.
-.PP
-You can restrict address pattern matching to aliases that you have defined with
-the \(lq\fB@\fP\(rq modifier. This example matches messages whose recipients
-are all from Germany \fBand\fP who are known to your alias list.
-.
-.IP
-Matching restricted to aliases:
-.BI ^@~C\~ \(rs.de$
-.
-.PP
-To match any defined alias, use a regular expression that matches \fBany\fP
-string. This example matches messages whose senders are known aliases.
-.
-.IP
-Matching any defined alias:
-.BI @~f\~ .
-.
-.SS "\s-1Nesting and Boolean Operators\s0"
-.\" --------------------------------------------------------------------
-.PP
-Logical AND is performed by specifying more than one criterion.
-.IP
-For example:
-.BI ~t\~ work " ~f\~" elkins
-.
-.PP
-would select messages which contain the word \(lqwork\(rq in the list of
-recipients \fBand\fP that have the word \(lqelkins\(rq in the \(lqFrom:\(rq
-header field.
-.
-.PP
-NeoMutt also recognizes the following operators to create more complex
-search patterns:
-.
-.RS
-.TP 4
-\(bu \(lq\fB!\fP\(rq \(em logical NOT operator
-.TQ
-\(bu \(lq\fB|\fP\(rq \(em logical OR operator
-.TQ
-\(bu \(lq\fB()\fP\(rq \(em logical grouping operator
-.RE
-.
-.PP
-Here is an example illustrating a complex search pattern. This pattern will
-select all messages which do \fBnot\fP contain \(lqwork\(rq in the \(lqTo:\(rq
-\fBor\fP \(lqCc:\(rq field \fBand\fP which are from \(lqelkins\(rq.
-.
-.IP
-Using boolean operators in patterns:
-.BI !(~t\~ work |~c\~ work ") ~f\~" elkins
-.
-.PP
-Here is an example using white space in the regular expression (note the
-\(lq\fB\(aq\fP\(rq and \(lq\fB\(dq\fP\(rq delimiters). For this to match, the
-mail's subject must match the \(lq^Junk +From +Me$\(rq \fBand\fP it must be
-from either \(lqJim +Somebody\(rq \fBor\fP \(lqEd +SomeoneElse\(rq:
-.
-.IP
-Quoting regex:
-.na
-.IB \(aq ~s\~ "\(dq^Junk +From +Me$\(dq"
-.BI ~f\~( "\(dqJim +Somebody\(dq" | "\(dqEd +SomeoneElse\(dq" ) \(aq
-.ad
-.
-.PP
-\fBNote\fP: If a regular expression contains parenthesis, or a vertical bar
-(\(lq\fB|\fP\(rq), you must enclose the expression in double or single quotes
-since those characters are also used to separate different parts of NeoMutt's
-pattern language.
-.
-.IP
-For example:
-.BI ~f \~\(dquser@ ( home\(rs.org | work\(rs.com ) \(dq
-.
-.PP
-Without the quotes, the parenthesis wouldn't end. This would be separated to
-two OR'd patterns:
-.BI ~f \~user@(home\(rs.org
-.RI "and " work\(rs.com) ". They are never what you want."
-.
-.SS "\s-1Searching by Date\s0"
-.\" --------------------------------------------------------------------
-.PP
-NeoMutt supports two types of dates, \fBabsolute\fP and \fBrelative\fP for
-the \(lq\fB~d\fP\(rq and \(lq\fB~r\fP\(rq pattern.
-.
-.PP
-.nf
-.B Absolute Dates
-.fi
-Dates must be in
-.IR dd [/ mm [/[ CC ] YY ]]
-format (day, month, century and year \(em all parts, with the exception of day,
-are optional, defaulting to the current month and year). An example of a valid
-range of dates is:
-.
-.IP
-Limit to messages matching:
-.IR \fB~d\fP\~20 / 1 / 95 - 31 / 10
-.
-.PP
-Alternatively, you may use \fIYYYYMMDD\fP to specify a date.
-.PP
-When given a two-digit year, NeoMutt will interpret values less than \(lq70\(rq
-as lying in the 21st century (i.e., \(lq38\(rq means 2038 and not 1938, and
-\(lq00\(rq is interpreted as 2000), and values greater than or equal to
-\(lq70\(rq as lying in the 20th century.
-.
-.PP
-If you omit the \fIMIN\fPimum (first) date, and just specify
-.RI - dd / mm / YY ,
-all messages before the given date will be selected. If you omit the
-\fIMAX\fPimum (second) date, and specify
-.IR dd / mm / YY -,
-all messages after the given date will be selected. If you specify a single
-date with no dash (\(lq\fB-\fP\(rq), only messages sent/received on the given
-date will be selected.
-.
-.PP
-You can add error margins to absolute dates. An error margin is a sign
-(\(lq\fB+\fP\(rq or \(lq\fB-\fP\(rq), followed by a digit, followed by one of
-the units in table \(lq\fBDate units\fP\(rq below. As a special case, you can
-replace the sign by a \(lq\fB*\fP\(rq character, which is equivalent to giving
-identical plus and minus error margins.
-.
-.\".TS
-.\"allbox tab(|);
-.\"cb cb
-.\"c l .
-.\"\0Unit|Description
-.\"\0d|Days
-.\"\0w|Weeks
-.\"\0m|Months
-.\"\0y|Years
-.\".TE
-.\".PP
-.\".
-.TS
-allbox center tab(|);
-lb c c c c
-lb l l l l .
-\0Date Unit|S|M|H|d|w|m|y
-\0Description|Seconds|Minutes|Hours|Days|Weeks|Months|Years
-.TE
-.PP
-.
-.PP
-\fBExample\fP: To select any messages two weeks around January 15, 2001, you'd
-use the following pattern:
-.
-.IP
-Limit to messages matching:
-.IR \fB~d\fP\~15 / 1 / 2001 \fB*\fP 2 \fBw\fP
-.
-.PP
-It is possible to give multiple error margins:
-.
-.IP
-which cumulate:
-.IR \fB~d\fP\~1 / 1 / 2001 \fB-\fP 1 \fBw+\fP 2 \fBw*\fP 3 \fBd\fP
-.
-.PP
-.nf
-.B Relative Dates
-.fi
-This type of date is relative to the current date, and may be specified as:
-.
-.RS
-.TP 4
-\(bu \(lq\fB<\fP\fIoffset\fP\(rq for messages newer than \fIoffset\fP units
-.TQ
-\(bu \(lq\fB=\fP\fIoffset\fP\(rq for messages exactly \fIoffset\fP units old
-.TQ
-\(bu \(lq\fB>\fP\fIoffset\fP\(rq for messages older than \fIoffset\fP units
-.RE
-.
-.PP
-\fIoffset\fP is specified as a positive number with one of the units from table
-\(lq\fBDate units\fP\(rq.
-.
-.PP
-\fBExample\fP: To select messages less than 1 month old, you would use:
-.
-.IP
-Limit to messages matching:
-.BI ~d\~< 1 m
-.
-.PP
-\fBNote\fP: All dates used when searching are relative to the \fBlocal\fP time
-zone, so unless you change the setting of your $index_format to include
-a \(lq\fB%[...]\fP\(rq format, these are \fBnot\fP the dates shown in the main
-index.
-.
-.\" --------------------------------------------------------------------
-.SH CONFIGURATION VARIABLES
-.\" --------------------------------------------------------------------
-
-.TP
-.B abort_backspace
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP, hitting backspace against an empty prompt aborts the
-prompt.
-
-
-.TP
-.B abort_key
-.nf
-Type: string
-Default: "007"
-.fi
-.IP
-Specifies the key that can be used to abort prompts. The format is the
-same as used in "bind" commands. The default is equivalent to "\\G".
-Note that the specified key should not be used in other bindings, as the
-abort operation has higher precedence and the binding will not have the
-desired effect.
-.IP
-Example:
-
-.IP
-.EX
-set abort_key = "<Esc>"
-
-.EE
-.IP
-Please note that when using <Esc> as the abort key, you may also want to
-set the environment variable ESCDELAY to a low value or even 0 which will
-reduce the time that ncurses waits to distinguish singular <Esc> key
-presses from the start of a terminal escape sequence. The default time is
-1000 milliseconds and thus quite noticeable.
-
-
-.TP
-.B abort_noattach
-.nf
-Type: quadoption
-Default: no
-.fi
-.IP
-If set to \fIyes\fP, when composing messages containing the regular
-expression specified by $abort_noattach_regex and no attachments are
-given, composition will be aborted. If set to \fIno\fP, composing messages
-as such will never be aborted.
-.IP
-Example:
-
-.IP
-.EX
-set abort_noattach_regex = "\\\\<attach(|ed|ments?)\\\\>"
-
-.EE
-
-
-.TP
-.B abort_noattach_regex
-.nf
-Type: regular expression
-Default: "\\<(attach|attached|attachments?)\\>"
-.fi
-.IP
-Specifies a regular expression to match against the body of the message, to
-determine if an attachment was mentioned but mistakenly forgotten. If it
-matches, $abort_noattach will be consulted to determine if message sending
-will be aborted.
-.IP
-Like other regular expressions in NeoMutt, the search is case sensitive
-if the pattern contains at least one upper case letter, and case
-insensitive otherwise.
-
-
-.TP
-.B abort_nosubject
-.nf
-Type: quadoption
-Default: ask\-yes
-.fi
-.IP
-If set to \fIyes\fP, when composing messages and no subject is given
-at the subject prompt, composition will be aborted. If set to
-\fIno\fP, composing messages with no subject given at the subject
-prompt will never be aborted.
-
-
-.TP
-.B abort_unmodified
-.nf
-Type: quadoption
-Default: yes
-.fi
-.IP
-If set to \fIyes\fP, composition will automatically abort after
-editing the message body if no changes are made to the file (this
-check only happens after the \fIfirst\fP edit of the file). When set
-to \fIno\fP, composition will never be aborted.
-
-
-.TP
-.B alias_file
-.nf
-Type: path
-Default: "~/.neomuttrc"
-.fi
-.IP
-The default file in which to save aliases created by the
-\fC<create-alias>\fP function. Entries added to this file are
-encoded in the character set specified by $config_charset if it
-is \fIset\fP or the current character set otherwise.
-.IP
-\fBNote:\fP NeoMutt will not automatically source this file; you must
-explicitly use the "source" command for it to be executed in case
-this option points to a dedicated alias file.
-.IP
-The default for this option is the currently used neomuttrc file, or
-"~/.neomuttrc" if no user neomuttrc was found.
-
-
-.TP
-.B alias_format
-.nf
-Type: string
-Default: "%3n %f%t %\-15a %\-56r | %c"
-.fi
-.IP
-Specifies the format of the data displayed for the "alias" menu. The
-following \fCprintf(3)\fP\-style sequences are available:
-.RS
-.PD 0
-.TP
-%a
-Alias name
-.TP
-%c
-Comment
-.TP
-%f
-Flags \- currently, a "d" for an alias marked for deletion
-.TP
-%n
-Index number
-.TP
-%r
-Address which alias expands to
-.TP
-%t
-Character which indicates if the alias is tagged for inclusion
-.TP
-%>X
-right justify the rest of the string and pad with character "X"
-.TP
-%|X
-pad to the end of the line with character "X"
-.TP
-%*X
-soft\-fill with character "X" as pad
-.RE
-.PD 1
-
-.TP
-.B allow_8bit
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-Controls whether 8\-bit data is converted to 7\-bit using either Quoted\-
-Printable or Base64 encoding when sending mail.
-
-
-.TP
-.B allow_ansi
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Controls whether ANSI color codes in messages (and color tags in
-rich text messages) are to be interpreted.
-Messages containing these codes are rare, but if this option is \fIset\fP,
-their text will be colored accordingly. Note that this may override
-your color choices, and even present a security problem, since a
-message could include a line like
-
-.IP
-.EX
-[\-\- PGP output follows ...
-
-.EE
-.IP
-and give it the same color as your attachment color (see also
-$crypt_timestamp).
-
-
-.TP
-.B arrow_cursor
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, an arrow ("\->") will be used to indicate the current entry
-in menus instead of highlighting the whole line. On slow network or modem
-links this will make response faster because there is less that has to
-be redrawn on the screen when moving to the next or previous entries
-in the menu.
-
-
-.TP
-.B arrow_string
-.nf
-Type: string
-Default: "\->"
-.fi
-.IP
-Specifies the string of arrow_cursor when arrow_cursor enabled.
-
-
-.TP
-.B ascii_chars
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, NeoMutt will use plain ASCII characters when displaying thread
-and attachment trees, instead of the default \fIACS\fP characters.
-
-
-.TP
-.B ask_follow_up
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If set, NeoMutt will prompt you for follow\-up groups before editing
-the body of an outgoing message.
-
-
-.TP
-.B ask_x_comment_to
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If set, NeoMutt will prompt you for x\-comment\-to field before editing
-the body of an outgoing message.
-
-
-.TP
-.B askbcc
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, NeoMutt will prompt you for blind\-carbon\-copy (Bcc) recipients
-before editing an outgoing message.
-
-
-.TP
-.B askcc
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, NeoMutt will prompt you for carbon\-copy (Cc) recipients before
-editing the body of an outgoing message.
-
-
-.TP
-.B assumed_charset
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-This variable is a colon\-separated list of character encoding
-schemes for messages without character encoding indication.
-Header field values and message body content without character encoding
-indication would be assumed that they are written in one of this list.
-By default, all the header fields and message body without any charset
-indication are assumed to be in "us\-ascii".
-.IP
-For example, Japanese users might prefer this:
-
-.IP
-.EX
-set assumed_charset="iso\-2022\-jp:euc\-jp:shift_jis:utf\-8"
-
-.EE
-.IP
-However, only the first content is valid for the message body.
-
-
-.TP
-.B attach_charset
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-This variable is a colon\-separated list of character encoding
-schemes for text file attachments. NeoMutt uses this setting to guess
-which encoding files being attached are encoded in to convert them to
-a proper character set given in $send_charset.
-.IP
-If \fIunset\fP, the value of $charset will be used instead.
-For example, the following configuration would work for Japanese
-text handling:
-
-.IP
-.EX
-set attach_charset="iso\-2022\-jp:euc\-jp:shift_jis:utf\-8"
-
-.EE
-.IP
-Note: for Japanese users, "iso\-2022\-*" must be put at the head
-of the value as shown above if included.
-
-
-.TP
-.B attach_format
-.nf
-Type: string
-Default: "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "
-.fi
-.IP
-This variable describes the format of the "attachment" menu. The
-following \fCprintf(3)\fP\-style sequences are understood:
-.RS
-.PD 0
-.TP
-%C
-Charset
-.TP
-%c
-Requires charset conversion ("n" or "c")
-.TP
-%D
-Deleted flag
-.TP
-%d
-Description (if none, falls back to %F)
-.TP
-%e
-MIME content\-transfer\-encoding
-.TP
-%f
-Filename
-.TP
-%F
-Filename in content\-disposition header (if none, falls back to %f)
-.TP
-%I
-Disposition ("I" for inline, "A" for attachment)
-.TP
-%m
-Major MIME type
-.TP
-%M
-MIME subtype
-.TP
-%n
-Attachment number
-.TP
-%Q
-"Q", if MIME part qualifies for attachment counting
-.TP
-%s
-Size (see formatstrings-size)
-.TP
-%T
-Graphic tree characters
-.TP
-%t
-Tagged flag
-.TP
-%u
-Unlink (=to delete) flag
-.TP
-%X
-Number of qualifying MIME parts in this part and its children
-(please see the "attachments" section for possible speed effects)
-.TP
-%>X
-Right justify the rest of the string and pad with character "X"
-.TP
-%|X
-Pad to the end of the line with character "X"
-.TP
-%*X
-Soft\-fill with character "X" as pad
-.RE
-.PD 1
-.IP
-For an explanation of "soft\-fill", see the $index_format documentation.
-
-
-.TP
-.B attach_save_dir
-.nf
-Type: path
-Default: "./"
-.fi
-.IP
-The directory where attachments are saved.
-
-
-.TP
-.B attach_save_without_prompting
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-This variable, when set to true, will cause attachments to be saved to
-the 'attach_save_dir' location without prompting the user for the filename.
-.IP
-
-
-.TP
-.B attach_sep
-.nf
-Type: string
-Default: "\\n"
-.fi
-.IP
-The separator to add between attachments when operating (saving,
-printing, piping, etc) on a list of tagged attachments.
-
-
-.TP
-.B attach_split
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If this variable is \fIunset\fP, when operating (saving, printing, piping,
-etc) on a list of tagged attachments, NeoMutt will concatenate the
-attachments and will operate on them as a single attachment. The
-$attach_sep separator is added after each attachment. When \fIset\fP,
-NeoMutt will operate on the attachments one by one.
-
-
-.TP
-.B attribution
-.nf
-Type: string
-Default: "On %d, %n wrote:"
-.fi
-.IP
-This is the string that will precede a message which has been included
-in a reply. For a full listing of defined \fCprintf(3)\fP\-like sequences see
-the section on $index_format.
-
-
-.TP
-.B attribution_locale
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-The locale used by \fCstrftime(3)\fP to format dates in the
-attribution string. Legal values are the strings your system
-accepts for the locale environment variable \fC$LC_TIME\fP.
-.IP
-This variable is to allow the attribution date format to be
-customized by recipient or folder using hooks. By default, NeoMutt
-will use your locale environment, so there is no need to set
-this except to override that default.
-
-
-.TP
-.B auto_subscribe
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt assumes the presence of a List\-Post header
-means the recipient is subscribed to the list. Unless the mailing list
-is in the "unsubscribe" or "unlist" lists, it will be added
-to the "subscribe" list. Parsing and checking these things slows
-header reading down, so this option is disabled by default.
-
-
-.TP
-.B auto_tag
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, functions in the \fIindex\fP menu which affect a message
-will be applied to all tagged messages (if there are any). When
-unset, you must first use the \fC<tag\-prefix>\fP function (bound to ";"
-by default) to make the next function apply to all tagged messages.
-
-
-.TP
-.B autocrypt
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, enables autocrypt, which provides
-passive encryption protection with keys exchanged via headers.
-See "autocryptdoc" for more details.
-(Autocrypt only)
-
-
-.TP
-.B autocrypt_acct_format
-.nf
-Type: string
-Default: "%4n %\-30a %20p %10s"
-.fi
-.IP
-This variable describes the format of the "autocrypt account" menu.
-The following \fCprintf(3)\fP\-style sequences are understood
-.RS
-.PD 0
-.TP
-%a
-email address
-.TP
-%k
-gpg keyid
-.TP
-%n
-current entry number
-.TP
-%p
-prefer\-encrypt flag
-.TP
-%s
-status flag (active/inactive)
-.RE
-.PD 1
-.IP
-(Autocrypt only)
-
-
-.TP
-.B autocrypt_dir
-.nf
-Type: path
-Default: "~/.mutt/autocrypt"
-.fi
-.IP
-This variable sets where autocrypt files are stored, including the GPG
-keyring and SQLite database. See "autocryptdoc" for more details.
-(Autocrypt only)
-
-
-.TP
-.B autocrypt_reply
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, replying to an autocrypt email automatically
-enables autocrypt in the reply. You may want to unset this if you're using
-the same key for autocrypt as normal web\-of\-trust, so that autocrypt
-isn't forced on for all encrypted replies.
-(Autocrypt only)
-
-
-.TP
-.B autoedit
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP along with $edit_headers, NeoMutt will skip the initial
-send\-menu (prompting for subject and recipients) and allow you to
-immediately begin editing the body of your
-message. The send\-menu may still be accessed once you have finished
-editing the body of your message.
-.IP
-\fBNote:\fP when this option is \fIset\fP, you can't use send\-hooks that depend
-on the recipients when composing a new (non\-reply) message, as the initial
-list of recipients is empty.
-.IP
-Also see $fast_reply.
-
-
-.TP
-.B beep
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When this variable is \fIset\fP, NeoMutt will beep when an error occurs.
-
-
-.TP
-.B beep_new
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When this variable is \fIset\fP, NeoMutt will beep whenever it prints a message
-notifying you of new mail. This is independent of the setting of the
-$beep variable.
-
-
-.TP
-.B bounce
-.nf
-Type: quadoption
-Default: ask\-yes
-.fi
-.IP
-Controls whether you will be asked to confirm bouncing messages.
-If set to \fIyes\fP you don't get asked if you want to bounce a
-message. Setting this variable to \fIno\fP is not generally useful,
-and thus not recommended, because you are unable to bounce messages.
-
-
-.TP
-.B bounce_delivered
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When this variable is \fIset\fP, NeoMutt will include Delivered\-To headers when
-bouncing messages. Postfix users may wish to \fIunset\fP this variable.
-
-
-.TP
-.B braille_friendly
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When this variable is \fIset\fP, NeoMutt will place the cursor at the beginning
-of the current line in menus, even when the $arrow_cursor variable
-is \fIunset\fP, making it easier for blind persons using Braille displays to
-follow these menus. The option is \fIunset\fP by default because many
-visual terminals don't permit making the cursor invisible.
-
-
-.TP
-.B browser_abbreviate_mailboxes
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When this variable is \fIset\fP, NeoMutt will abbreviate mailbox
-names in the browser mailbox list, using '~' and '='
-shortcuts.
-.IP
-The default \fC"alpha"\fP setting of $sort_browser uses
-locale\-based sorting (using \fCstrcoll(3)\fP), which ignores some
-punctuation. This can lead to some situations where the order
-doesn't make intuitive sense. In those cases, it may be
-desirable to \fIunset\fP this variable.
-
-
-.TP
-.B catchup_newsgroup
-.nf
-Type: quadoption
-Default: ask\-yes
-.fi
-.IP
-If this variable is \fIset\fP, NeoMutt will mark all articles in newsgroup
-as read when you quit the newsgroup (catchup newsgroup).
-
-
-.TP
-.B certificate_file
-.nf
-Type: path
-Default: "~/.mutt_certificates"
-.fi
-.IP
-This variable specifies the file where the certificates you trust
-are saved. When an unknown certificate is encountered, you are asked
-if you accept it or not. If you accept it, the certificate can also
-be saved in this file and further connections are automatically
-accepted.
-.IP
-You can also manually add CA certificates in this file. Any server
-certificate that is signed with one of these CA certificates is
-also automatically accepted.
-.IP
-Example:
-
-.IP
-.EX
-set certificate_file=~/.neomutt/certificates
-
-.EE
-
-
-.TP
-.B change_folder_next
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When this variable is \fIset\fP, the \fC<change\-folder>\fP function
-mailbox suggestion will start at the next folder in your "mailboxes"
-list, instead of starting at the first folder in the list.
-
-
-.TP
-.B charset
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-Character set your terminal uses to display and enter textual data.
-It is also the fallback for $send_charset.
-.IP
-Upon startup NeoMutt tries to derive this value from environment variables
-such as \fC$LC_CTYPE\fP or \fC$LANG\fP.
-.IP
-\fBNote:\fP It should only be set in case NeoMutt isn't able to determine the
-character set used correctly.
-
-
-.TP
-.B check_mbox_size
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When this variable is \fIset\fP, NeoMutt will use file size attribute instead of
-access time when checking for new mail in mbox and mmdf folders.
-.IP
-This variable is \fIunset\fP by default and should only be enabled when
-new mail detection for these folder types is unreliable or doesn't work.
-.IP
-Note that enabling this variable should happen before any "mailboxes"
-directives occur in configuration files regarding mbox or mmdf folders
-because NeoMutt needs to determine the initial new mail status of such a
-mailbox by performing a fast mailbox scan when it is defined.
-Afterwards the new mail status is tracked by file size changes.
-
-
-.TP
-.B check_new
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-\fBNote:\fP this option only affects \fImaildir\fP and \fIMH\fP style
-mailboxes.
-.IP
-When \fIset\fP, NeoMutt will check for new mail delivered while the
-mailbox is open. Especially with MH mailboxes, this operation can
-take quite some time since it involves scanning the directory and
-checking each file to see if it has already been looked at. If
-this variable is \fIunset\fP, no check for new mail is performed
-while the mailbox is open.
-
-
-.TP
-.B collapse_all
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt will collapse all threads when entering a folder.
-
-
-.TP
-.B collapse_flagged
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIunset\fP, NeoMutt will not collapse a thread if it contains any
-flagged messages.
-
-
-.TP
-.B collapse_unread
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIunset\fP, NeoMutt will not collapse a thread if it contains any
-unread messages.
-
-
-.TP
-.B compose_format
-.nf
-Type: string
-Default: "\-\- NeoMutt: Compose [Approx. msg size: %l Atts: %a]%>\-"
-.fi
-.IP
-Controls the format of the status line displayed in the "compose"
-menu. This string is similar to $status_format, but has its own
-set of \fCprintf(3)\fP\-like sequences:
-.RS
-.PD 0
-.TP
-%a
-Total number of attachments
-.TP
-%h
-Local hostname
-.TP
-%l
-Approximate size (in bytes) of the current message (see formatstrings-size)
-.TP
-%v
-NeoMutt version string
-.TP
-%>X
-right justify the rest of the string and pad with character "X"
-.TP
-%|X
-pad to the end of the line with character "X"
-.TP
-%*X
-soft\-fill with character "X" as pad
-.RE
-.PD 1
-.IP
-See the text describing the $status_format option for more
-information on how to set $compose_format.
-
-
-.TP
-.B compose_show_user_headers
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, Neomutt will display user\-defined headers (set via my_hdr
-or from editing with edit\-headers).
-
-
-.TP
-.B config_charset
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-When defined, NeoMutt will recode commands in rc files from this
-encoding to the current character set as specified by $charset
-and aliases written to $alias_file from the current character set.
-.IP
-Please note that if setting $charset it must be done before
-setting $config_charset.
-.IP
-Recoding should be avoided as it may render unconvertable
-characters as question marks which can lead to undesired
-side effects (for example in regular expressions).
-
-
-.TP
-.B confirmappend
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will prompt for confirmation when appending messages to
-an existing mailbox.
-
-
-.TP
-.B confirmcreate
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will prompt for confirmation when saving messages to a
-mailbox which does not yet exist before creating it.
-
-
-.TP
-.B connect_timeout
-.nf
-Type: number
-Default: 30
-.fi
-.IP
-Causes NeoMutt to timeout a network connection (for IMAP, POP or SMTP) after this
-many seconds if the connection is not able to be established. A negative
-value causes NeoMutt to wait indefinitely for the connection attempt to succeed.
-
-
-.TP
-.B content_type
-.nf
-Type: string
-Default: "text/plain"
-.fi
-.IP
-Sets the default Content\-Type for the body of newly composed messages.
-
-
-.TP
-.B copy
-.nf
-Type: quadoption
-Default: yes
-.fi
-.IP
-This variable controls whether or not copies of your outgoing messages
-will be saved for later references. Also see $record,
-$save_name, $force_name and "fcc-hook".
-
-
-.TP
-.B copy_decode_weed
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Controls whether NeoMutt will weed headers when invoking the
-\fC<decode\-copy>\fP or \fC<decode\-save>\fP functions.
-
-
-.TP
-.B count_alternatives
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, Mutt will recurse inside multipart/alternatives while
-performing attachment searching and counting(see attachments).
-.IP
-Traditionally, multipart/alternative parts have simply represented
-different encodings of the main content of the email. Unfortunately,
-some mail clients have started to place email attachments inside
-one of alternatives. Setting this will allow Mutt to find
-and count matching attachments hidden there, and include them
-in the index via %X or through ~X pattern matching.
-
-
-.TP
-.B crypt_autoencrypt
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Setting this variable will cause NeoMutt to always attempt to PGP
-encrypt outgoing messages. This is probably only useful in
-connection to the "send-hook" command. It can be overridden
-by use of the pgp menu, when encryption is not required or
-signing is requested as well. If $smime_is_default is \fIset\fP,
-then OpenSSL is used instead to create S/MIME messages and
-settings can be overridden by use of the smime menu instead.
-(Crypto only)
-
-
-.TP
-.B crypt_autopgp
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-This variable controls whether or not NeoMutt may automatically enable
-PGP encryption/signing for messages. See also $crypt_autoencrypt,
-$crypt_replyencrypt,
-$crypt_autosign, $crypt_replysign and $smime_is_default.
-
-
-.TP
-.B crypt_autosign
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Setting this variable will cause NeoMutt to always attempt to
-cryptographically sign outgoing messages. This can be overridden
-by use of the pgp menu, when signing is not required or
-encryption is requested as well. If $smime_is_default is \fIset\fP,
-then OpenSSL is used instead to create S/MIME messages and settings can
-be overridden by use of the smime menu instead of the pgp menu.
-(Crypto only)
-
-
-.TP
-.B crypt_autosmime
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-This variable controls whether or not NeoMutt may automatically enable
-S/MIME encryption/signing for messages. See also $crypt_autoencrypt,
-$crypt_replyencrypt,
-$crypt_autosign, $crypt_replysign and $smime_is_default.
-
-
-.TP
-.B crypt_chars
-.nf
-Type: character string
-Default: "SPsK "
-.fi
-.IP
-Controls the characters used in cryptography flags.
-.RS
-.PD 0
-.TP
-\fBCharacter\fP
-\fBDefault\fP
-\fBDescription\fP
-.TP
-1
-S
-The mail is signed, and the signature is successfully verified.
-.TP
-2
-P
-The mail is PGP encrypted.
-.TP
-3
-s
-The mail is signed.
-.TP
-4
-K
-The mail contains a PGP public key.
-.TP
-5
-<space>
-The mail has no crypto info.
-.RE
-.PD 1
-
-.TP
-.B crypt_confirmhook
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If set, then you will be prompted for confirmation of keys when using
-the \fIcrypt\-hook\fP command. If unset, no such confirmation prompt will
-be presented. This is generally considered unsafe, especially where
-typos are concerned.
-
-
-.TP
-.B crypt_opportunistic_encrypt
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Setting this variable will cause NeoMutt to automatically enable and
-disable encryption, based on whether all message recipient keys
-can be located by NeoMutt.
-.IP
-When this option is enabled, NeoMutt will enable/disable encryption
-each time the TO, CC, and BCC lists are edited. If
-$edit_headers is set, NeoMutt will also do so each time the message
-is edited.
-.IP
-While this is set, encryption can't be manually enabled/disabled.
-The pgp or smime menus provide a selection to temporarily disable
-this option for the current message.
-.IP
-If $crypt_autoencrypt or $crypt_replyencrypt enable encryption for
-a message, this option will be disabled for that message. It can
-be manually re\-enabled in the pgp or smime menus.
-(Crypto only)
-
-
-.TP
-.B crypt_opportunistic_encrypt_strong_keys
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When set, this modifies the behavior of $crypt_opportunistic_encrypt
-to only search for "strong keys", that is, keys with full validity
-according to the web\-of\-trust algorithm. A key with marginal or no
-validity will not enable opportunistic encryption.
-.IP
-For S/MIME, the behavior depends on the backend. Classic S/MIME will
-filter for certificates with the 't'(trusted) flag in the .index file.
-The GPGME backend will use the same filters as with OpenPGP, and depends
-on GPGME's logic for assigning the GPGME_VALIDITY_FULL and
-GPGME_VALIDITY_ULTIMATE validity flag.
-
-
-.TP
-.B crypt_protected_headers_read
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When set, NeoMutt will display protected headers ("Memory Hole") in the pager,
-When set, NeoMutt will display protected headers in the pager,
-and will update the index and header cache with revised headers.
-.IP
-Protected headers are stored inside the encrypted or signed part of an
-an email, to prevent disclosure or tampering.
-For more information see https://github.com/autocrypt/protected\-headers
-Currently NeoMutt only supports the Subject header.
-.IP
-Encrypted messages using protected headers often substitute the exposed
-Subject header with a dummy value (see $crypt_protected_headers_subject).
-NeoMutt will update its concept of the correct subject \fBafter\fP the
-message is opened, i.e. via the \fC<display\-message>\fP function.
-If you reply to a message before opening it, NeoMutt will end up using
-the dummy Subject header, so be sure to open such a message first.
-(Crypto only)
-
-
-.TP
-.B crypt_protected_headers_save
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When $crypt_protected_headers_read is set, and a message with a
-protected Subject is opened, NeoMutt will save the updated Subject
-into the header cache by default. This allows searching/limiting
-based on the protected Subject header if the mailbox is
-re\-opened, without having to re\-open the message each time.
-However, for mbox/mh mailbox types, or if header caching is not
-set up, you would need to re\-open the message each time the
-mailbox was reopened before you could see or search/limit on the
-protected subject again.
-.IP
-When this variable is set, NeoMutt additionally saves the protected
-Subject back \fBin the clear\-text message headers\fP. This
-provides better usability, but with the tradeoff of reduced
-security. The protected Subject header, which may have
-previously been encrypted, is now stored in clear\-text in the
-message headers. Copying the message elsewhere, via NeoMutt or
-external tools, could expose this previously encrypted data.
-Please make sure you understand the consequences of this before
-you enable this variable.
-(Crypto only)
-
-
-.TP
-.B crypt_protected_headers_subject
-.nf
-Type: string
-Default: "..."
-.fi
-.IP
-When $crypt_protected_headers_write is set, and the message is marked
-for encryption, this will be substituted into the Subject field in the
-message headers.
-.IP
-To prevent a subject from being substituted, unset this variable, or set it
-to the empty string.
-(Crypto only)
-
-
-.TP
-.B crypt_protected_headers_write
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When set, NeoMutt will generate protected headers for signed and encrypted
-emails.
-.IP
-Protected headers are stored inside the encrypted or signed part of an
-an email, to prevent disclosure or tampering.
-For more information see https://github.com/autocrypt/protected\-headers
-.IP
-Currently NeoMutt only supports the Subject header.
-(Crypto only)
-
-
-.TP
-.B crypt_replyencrypt
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP, automatically PGP or OpenSSL encrypt replies to messages which are
-encrypted.
-(Crypto only)
-
-
-.TP
-.B crypt_replysign
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, automatically PGP or OpenSSL sign replies to messages which are
-signed.
-.IP
-\fBNote:\fP this does not work on messages that are encrypted
-\fIand\fP signed!
-(Crypto only)
-
-
-.TP
-.B crypt_replysignencrypted
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, automatically PGP or OpenSSL sign replies to messages
-which are encrypted. This makes sense in combination with
-$crypt_replyencrypt, because it allows you to sign all
-messages which are automatically encrypted. This works around
-the problem noted in $crypt_replysign, that NeoMutt is not able
-to find out whether an encrypted message is also signed.
-(Crypto only)
-
-
-.TP
-.B crypt_timestamp
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP, NeoMutt will include a time stamp in the lines surrounding
-PGP or S/MIME output, so spoofing such lines is more difficult.
-If you are using colors to mark these lines, and rely on these,
-you may \fIunset\fP this setting.
-(Crypto only)
-
-
-.TP
-.B crypt_use_gpgme
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-This variable controls the use of the GPGME\-enabled crypto backends.
-If it is \fIset\fP and NeoMutt was built with GPGME support, the gpgme code for
-S/MIME and PGP will be used instead of the classic code. Note that
-you need to set this option in .neomuttrc; it won't have any effect when
-used interactively.
-.IP
-Note that the GPGME backend does not support creating old\-style inline
-(traditional) PGP encrypted or signed messages (see $pgp_autoinline).
-
-
-.TP
-.B crypt_use_pka
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Controls whether NeoMutt uses PKA
-(see http://www.g10code.de/docs/pka\-intro.de.pdf) during signature
-verification (only supported by the GPGME backend).
-
-
-.TP
-.B crypt_verify_sig
-.nf
-Type: quadoption
-Default: yes
-.fi
-.IP
-If \fI"yes"\fP, always attempt to verify PGP or S/MIME signatures.
-If \fI"ask\-*"\fP, ask whether or not to verify the signature.
-If \fI"no"\fP, never attempt to verify cryptographic signatures.
-(Crypto only)
-
-
-.TP
-.B date_format
-.nf
-Type: string
-Default: "!%a, %b %d, %Y at %I:%M:%S%p %Z"
-.fi
-.IP
-This variable controls the format of the date printed by the "%d"
-sequence in $index_format. This is passed to the \fCstrftime(3)\fP
-function to process the date, see the man page for the proper syntax.
-.IP
-Unless the first character in the string is a bang ("!"), the month
-and week day names are expanded according to the locale.
-If the first character in the string is a
-bang, the bang is discarded, and the month and week day names in the
-rest of the string are expanded in the \fIC\fP locale (that is in US
-English).
-
-
-.TP
-.B debug_file
-.nf
-Type: path
-Default: "~/.neomuttdebug"
-.fi
-.IP
-Debug logging is controlled by the variables \fC$debug_file\fP and \fC$debug_level\fP.
-\fC$debug_file\fP specifies the root of the filename. NeoMutt will add "0" to the end.
-Each time NeoMutt is run with logging enabled, the log files are rotated.
-A maximum of five log files are kept, numbered 0 (most recent) to 4 (oldest).
-.IP
-This option can be enabled on the command line, "neomutt \-l mylog"
-.IP
-See also: \fC$debug_level\fP
-
-
-.TP
-.B debug_level
-.nf
-Type: number
-Default: 0
-.fi
-.IP
-Debug logging is controlled by the variables \fC$debug_file\fP and \fC$debug_level\fP.
-.IP
-The debug level controls how much information is saved to the log file.
-If you have a problem with NeoMutt, then enabling logging may help find the cause.
-Levels 1\-3 will usually provide enough information for writing a bug report.
-Levels 4,5 will be extremely verbose.
-.IP
-Warning: Logging at high levels may save private information to the file.
-.IP
-This option can be enabled on the command line, "neomutt \-d 2"
-.IP
-See also: \fC$debug_file\fP
-
-
-.TP
-.B default_hook
-.nf
-Type: string
-Default: "~f %s !~P | (~P ~C %s)"
-.fi
-.IP
-This variable controls how "message-hook", "reply-hook", "send-hook",
-"send2-hook", "save-hook", and "fcc-hook" will
-be interpreted if they are specified with only a simple regex,
-instead of a matching pattern. The hooks are expanded when they are
-declared, so a hook will be interpreted according to the value of this
-variable at the time the hook is declared.
-.IP
-The default value matches
-if the message is either from a user matching the regular expression
-given, or if it is from you (if the from address matches
-"alternates") and is to or cc'ed to a user matching the given
-regular expression.
-
-
-.TP
-.B delete
-.nf
-Type: quadoption
-Default: ask\-yes
-.fi
-.IP
-Controls whether or not messages are really deleted when closing or
-synchronizing a mailbox. If set to \fIyes\fP, messages marked for
-deleting will automatically be purged without prompting. If set to
-\fIno\fP, messages marked for deletion will be kept in the mailbox.
-
-
-.TP
-.B delete_untag
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If this option is \fIset\fP, NeoMutt will untag messages when marking them
-for deletion. This applies when you either explicitly delete a message,
-or when you save it to another folder.
-
-
-.TP
-.B digest_collapse
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If this option is \fIset\fP, NeoMutt's received\-attachments menu will not show the subparts of
-individual messages in a multipart/digest. To see these subparts, press "v" on that menu.
-
-
-.TP
-.B display_filter
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-When set, specifies a command used to filter messages. When a message
-is viewed it is passed as standard input to $display_filter, and the
-filtered message is read from the standard output.
-.IP
-When preparing the message, NeoMutt inserts some escape sequences into the
-text. They are of the form: \fC<esc>]9;XXX<bel>\fP where "XXX" is a random
-64\-bit number.
-.IP
-If these escape sequences interfere with your filter, they can be removed
-using a tool like \fCansifilter\fP or \fCsed 's/^\\x1b]9;[0\-9]\\+\\x7//'\fP
-.IP
-If they are removed, then PGP and MIME headers will no longer be coloured.
-This can be fixed by adding this to your config:
-\fCcolor body magenta default '^\\[\-\- .* \-\-\\]$'\fP.
-
-
-.TP
-.B dsn_notify
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-This variable sets the request for when notification is returned. The
-string consists of a comma separated list (no spaces!) of one or more
-of the following: \fInever\fP, to never request notification,
-\fIfailure\fP, to request notification on transmission failure,
-\fIdelay\fP, to be notified of message delays, \fIsuccess\fP, to be
-notified of successful transmission.
-.IP
-Example:
-
-.IP
-.EX
-set dsn_notify="failure,delay"
-
-.EE
-.IP
-\fBNote:\fP when using $sendmail for delivery, you should not enable
-this unless you are either using Sendmail 8.8.x or greater or a MTA
-providing a \fCsendmail(1)\fP\-compatible interface supporting the \fC\-N\fP option
-for DSN. For SMTP delivery, DSN support is auto\-detected so that it
-depends on the server whether DSN will be used or not.
-
-
-.TP
-.B dsn_return
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-This variable controls how much of your message is returned in DSN
-messages. It may be set to either \fIhdrs\fP to return just the
-message header, or \fIfull\fP to return the full message.
-.IP
-Example:
-
-.IP
-.EX
-set dsn_return=hdrs
-
-.EE
-.IP
-\fBNote:\fP when using $sendmail for delivery, you should not enable
-this unless you are either using Sendmail 8.8.x or greater or a MTA
-providing a \fCsendmail(1)\fP\-compatible interface supporting the \fC\-R\fP option
-for DSN. For SMTP delivery, DSN support is auto\-detected so that it
-depends on the server whether DSN will be used or not.
-
-
-.TP
-.B duplicate_threads
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-This variable controls whether NeoMutt, when $sort is set to \fIthreads\fP, threads
-messages with the same Message\-Id together. If it is \fIset\fP, it will indicate
-that it thinks they are duplicates of each other with an equals sign
-in the thread tree.
-
-
-.TP
-.B edit_headers
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-This option allows you to edit the header of your outgoing messages
-along with the body of your message.
-.IP
-Although the compose menu may have localized header labels, the
-labels passed to your editor will be standard RFC2822 headers,
-(e.g. To:, Cc:, Subject:). Headers added in your editor must
-also be RFC2822 headers, or one of the pseudo headers listed in
-"edit-header". NeoMutt will not understand localized header
-labels, just as it would not when parsing an actual email.
-.IP
-\fBNote\fP that changes made to the References: and Date: headers are
-ignored for interoperability reasons.
-
-
-.TP
-.B editor
-.nf
-Type: command
-Default: "vi"
-.fi
-.IP
-This variable specifies which editor is used by NeoMutt.
-It defaults to the value of the \fC$VISUAL\fP, or \fC$EDITOR\fP, environment
-variable, or to the string "vi" if neither of those are set.
-.IP
-The \fC$editor\fP string may contain a \fI%s\fP escape, which will be replaced by the name
-of the file to be edited. If the \fI%s\fP escape does not appear in \fC$editor\fP, a
-space and the name to be edited are appended.
-.IP
-The resulting string is then executed by running
-
-.IP
-.EX
-sh \-c 'string'
-
-.EE
-.IP
-where \fIstring\fP is the expansion of \fC$editor\fP described above.
-
-
-.TP
-.B empty_subject
-.nf
-Type: string
-Default: "Re: your mail"
-.fi
-.IP
-This variable specifies the subject to be used when replying to an email
-with an empty subject. It defaults to "Re: your mail".
-
-
-.TP
-.B encode_from
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt will quoted\-printable encode messages when
-they contain the string "From " (note the trailing space) in the beginning of a line.
-This is useful to avoid the tampering certain mail delivery and transport
-agents tend to do with messages (in order to prevent tools from
-misinterpreting the line as a mbox message separator).
-
-
-.TP
-.B entropy_file
-.nf
-Type: path
-Default: ""
-.fi
-.IP
-The file which includes random data that is used to initialize SSL
-library functions.
-
-
-.TP
-.B envelope_from_address
-.nf
-Type: e-mail address
-Default: ""
-.fi
-.IP
-Manually sets the \fIenvelope\fP sender for outgoing messages.
-This value is ignored if $use_envelope_from is \fIunset\fP.
-
-
-.TP
-.B external_search_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-If set, contains the name of the external program used by "~I" patterns.
-This will usually be a wrapper script around mairix, mu, or similar
-indexers other than notmuch (for which there is optional special support).
-.IP
-Here is an example how it works. Let's assume $external_search_command
-is set to "mairix_filter", and mairix_filter is a script which
-runs the old but well loved mairix indexer with the arguments
-given to mairix_filter, in the "raw" mode of mairix, producing
-on the standard output a list of Message\-IDs, one per line.
-.IP
-If possible, it also filters down the results coming from mairix
-such that only messages in the current folder remain. It can do
-this because it gets a hidden first argument which is the path
-to the folder.
-(This can be the type of clean and simple script called a \fIone\-liner\fP.)
-.IP
-Now if NeoMutt gets a limit or tag command followed by the pattern
-"~I '\-t s:bleeping='", mairix_filter runs mairix with the
-arguments from inside the quotes (the quotes are needed because
-of the space after "\-t"), mairix finds all messages with
-"bleeping" in the Subject plus all messages sharing threads
-with these and outputs their file names, and mairix_filter
-translates the file names into Message\-IDs. Finally, NeoMutt
-reads the Message\-IDs and targets the matching messages with the
-command given to it.
-.IP
-You, the user, still have to rewrite the mairix_filter script to
-match the behavior of your indexer, but this should help users
-of indexers other than notmuch to integrate them cleanly with NeoMutt.
-
-
-.TP
-.B fast_reply
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, the initial prompt for recipients and subject are skipped
-when replying to messages, and the initial prompt for subject is
-skipped when forwarding messages.
-.IP
-\fBNote:\fP this variable has no effect when the $autoedit
-variable is \fIset\fP.
-
-
-.TP
-.B fcc_attach
-.nf
-Type: quadoption
-Default: yes
-.fi
-.IP
-This variable controls whether or not attachments on outgoing messages
-are saved along with the main body of your message.
-
-
-.TP
-.B fcc_before_send
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When this variable is \fIset\fP, FCCs will occur before sending
-the message. Before sending, the message cannot be manipulated,
-so it will be stored the exact same as sent:
-$fcc_attach and $fcc_clear will be ignored (using their default
-values).
-.IP
-When \fIunset\fP, the default, FCCs will occur after sending.
-Variables $fcc_attach and $fcc_clear will be respected, allowing
-it to be stored without attachments or encryption/signing if
-desired.
-
-
-.TP
-.B fcc_clear
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When this variable is \fIset\fP, FCCs will be stored unencrypted and
-unsigned, even when the actual message is encrypted and/or
-signed.
-(PGP only)
-
-
-.TP
-.B flag_chars
-.nf
-Type: character string
-Default: "*!DdrONon\- "
-.fi
-.IP
-Controls the characters used in several flags.
-.RS
-.PD 0
-.TP
-\fBCharacter\fP
-\fBDefault\fP
-\fBDescription\fP
-.TP
-1
-*
-The mail is tagged.
-.TP
-2
-!
-The mail is flagged as important.
-.TP
-3
-D
-The mail is marked for deletion.
-.TP
-4
-d
-The mail has attachments marked for deletion.
-.TP
-5
-r
-The mail has been replied to.
-.TP
-6
-O
-The mail is Old (Unread but seen).
-.TP
-7
-N
-The mail is New (Unread but not seen).
-.TP
-8
-o
-The mail thread is Old (Unread but seen).
-.TP
-9
-n
-The mail thread is New (Unread but not seen).
-.TP
-10
-\-
-The mail is read \- %S expando.
-.TP
-11
-<space>
-The mail is read \- %Z expando.
-.RE
-.PD 1
-
-.TP
-.B flag_safe
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If set, flagged messages can't be deleted.
-
-
-.TP
-.B folder
-.nf
-Type: mailbox
-Default: "~/Mail"
-.fi
-.IP
-Specifies the default location of your mailboxes. A "+" or "=" at the
-beginning of a pathname will be expanded to the value of this
-variable. Note that if you change this variable (from the default)
-value you need to make sure that the assignment occurs \fIbefore\fP
-you use "+" or "=" for any other variables since expansion takes place
-when handling the "mailboxes" command.
-
-
-.TP
-.B folder_format
-.nf
-Type: string
-Default: "%2C %t %N %F %2l %\-8.8u %\-8.8g %8s %d %i"
-.fi
-.IP
-This variable allows you to customize the file browser display to your
-personal taste. This string is similar to $index_format, but has
-its own set of \fCprintf(3)\fP\-like sequences:
-.RS
-.PD 0
-.TP
-%C
-
-Current file number
-.TP
-%d
-
-Date/time folder was last modified
-.TP
-%D
-
-Date/time folder was last modified using $date_format.
-.TP
-%f
-
-Filename ("/" is appended to directory names,
-"@" to symbolic links and "*" to executable files)
-.TP
-%F
-
-File permissions
-.TP
-%g
-
-Group name (or numeric gid, if missing)
-.TP
-%i
-
-Description of the folder
-.TP
-%l
-
-Number of hard links
-.TP
-%m
-*
-Number of messages in the mailbox
-.TP
-%n
-*
-Number of unread messages in the mailbox
-.TP
-%N
-
-"N" if mailbox has new mail, blank otherwise
-.TP
-%s
-
-Size in bytes (see formatstrings-size)
-.TP
-%t
-
-"*" if the file is tagged, blank otherwise
-.TP
-%u
-
-Owner name (or numeric uid, if missing)
-.TP
-%>X
-
-Right justify the rest of the string and pad with character "X"
-.TP
-%|X
-
-Pad to the end of the line with character "X"
-.TP
-%*X
-
-Soft\-fill with character "X" as pad
-.RE
-.PD 1
-.IP
-For an explanation of "soft\-fill", see the $index_format documentation.
-.IP
-* = can be optionally printed if nonzero
-.IP
-%m, %n, and %N only work for monitored mailboxes.
-%m requires $mail_check_stats to be set.
-%n requires $mail_check_stats to be set (except for IMAP mailboxes).
-
-
-.TP
-.B followup_to
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-Controls whether or not the "Mail\-Followup\-To:" header field is
-generated when sending mail. When \fIset\fP, NeoMutt will generate this
-field when you are replying to a known mailing list, specified with
-the "subscribe" or "lists" commands.
-.IP
-This field has two purposes. First, preventing you from
-receiving duplicate copies of replies to messages which you send
-to mailing lists, and second, ensuring that you do get a reply
-separately for any messages sent to known lists to which you are
-not subscribed.
-.IP
-The header will contain only the list's address
-for subscribed lists, and both the list address and your own
-email address for unsubscribed lists. Without this header, a
-group reply to your message sent to a subscribed list will be
-sent to both the list and your address, resulting in two copies
-of the same email for you.
-
-
-.TP
-.B followup_to_poster
-.nf
-Type: quadoption
-Default: ask\-yes
-.fi
-.IP
-If this variable is \fIset\fP and the keyword "poster" is present in
-\fIFollowup\-To\fP header, follow\-up to newsgroup function is not
-permitted. The message will be mailed to the submitter of the
-message via mail.
-
-
-.TP
-.B force_name
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-This variable is similar to $save_name, except that NeoMutt will
-store a copy of your outgoing message by the username of the address
-you are sending to even if that mailbox does not exist.
-.IP
-Also see the $record variable.
-
-
-.TP
-.B forward_attachments
-.nf
-Type: quadoption
-Default: ask\-yes
-.fi
-.IP
-When forwarding inline (i.e. $mime_forward \fIunset\fP or
-answered with "no" and $forward_decode \fIset\fP), attachments
-which cannot be decoded in a reasonable manner will be attached
-to the newly composed message if this quadoption is \fIset\fP or
-answered with "yes".
-
-
-.TP
-.B forward_attribution_intro
-.nf
-Type: string
-Default: "\-\-\-\-\- Forwarded message from %f \-\-\-\-\-"
-.fi
-.IP
-This is the string that will precede a message which has been forwarded
-in the main body of a message (when $mime_forward is unset).
-For a full listing of defined \fCprintf(3)\fP\-like sequences see
-the section on $index_format. See also $attribution_locale.
-
-
-.TP
-.B forward_attribution_trailer
-.nf
-Type: string
-Default: "\-\-\-\-\- End forwarded message \-\-\-\-\-"
-.fi
-.IP
-This is the string that will follow a message which has been forwarded
-in the main body of a message (when $mime_forward is unset).
-For a full listing of defined \fCprintf(3)\fP\-like sequences see
-the section on $index_format. See also $attribution_locale.
-
-
-.TP
-.B forward_decode
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-Controls the decoding of complex MIME messages into \fCtext/plain\fP when
-forwarding a message. The message header is also RFC2047 decoded.
-This variable is only used, if $mime_forward is \fIunset\fP,
-otherwise $mime_forward_decode is used instead.
-
-
-.TP
-.B forward_decrypt
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-Controls the handling of encrypted messages when forwarding a message.
-When \fIset\fP, the outer layer of encryption is stripped off. This
-variable is only used if $mime_forward is \fIset\fP and
-$mime_forward_decode is \fIunset\fP.
-(PGP only)
-
-
-.TP
-.B forward_edit
-.nf
-Type: quadoption
-Default: yes
-.fi
-.IP
-This quadoption controls whether or not the user is automatically
-placed in the editor when forwarding messages. For those who always want
-to forward with no modification, use a setting of "no".
-
-
-.TP
-.B forward_format
-.nf
-Type: string
-Default: "[%a: %s]"
-.fi
-.IP
-This variable controls the default subject when forwarding a message.
-It uses the same format sequences as the $index_format variable.
-
-
-.TP
-.B forward_quote
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, forwarded messages included in the main body of the
-message (when $mime_forward is \fIunset\fP) will be quoted using
-$indent_string.
-
-
-.TP
-.B forward_references
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, forwarded messages set the "In\-Reply\-To:" and
-"References:" headers in the same way as normal replies would. Hence the
-forwarded message becomes part of the original thread instead of starting
-a new one.
-
-
-.TP
-.B from
-.nf
-Type: e-mail address
-Default: ""
-.fi
-.IP
-When \fIset\fP, this variable contains a default "from" address. It
-can be overridden using "my_hdr" (including from a "send-hook") and
-$reverse_name. This variable is ignored if $use_from is \fIunset\fP.
-.IP
-If not specified, then it may be read from the environment variable \fC$EMAIL\fP.
-
-
-.TP
-.B from_chars
-.nf
-Type: character string
-Default: ""
-.fi
-.IP
-Controls the character used to prefix the %F and %L fields in the
-index.
-.RS
-.PD 0
-.TP
-\fBCharacter\fP
-\fBDescription\fP
-.TP
-1
-Mail is written by you and has a To address, or has a known mailing list in the To address.
-.TP
-2
-Mail is written by you and has a Cc address, or has a known mailing list in the Cc address.
-.TP
-3
-Mail is written by you and has a Bcc address.
-.TP
-4
-All remaining cases.
-.RE
-.PD 1
-.IP
-If this is empty or unset (default), the traditional long "To ",
-"Cc " and "Bcc " prefixes are used. If set but too short to
-include a character for a particular case, a single space will be
-prepended to the field. To prevent any prefix at all from being
-added in a particular case, use the special value CR (aka ^M)
-for the corresponding character.
-.IP
-This slightly odd interface is necessitated by NeoMutt's handling of
-string variables; one can't tell a variable that is unset from one
-that is set to the empty string.
-
-
-.TP
-.B gecos_mask
-.nf
-Type: regular expression
-Default: "^[^,]*"
-.fi
-.IP
-A regular expression used by NeoMutt to parse the GECOS field of a password
-entry when expanding the alias. The default value
-will return the string up to the first "," encountered.
-If the GECOS field contains a string like "lastname, firstname" then you
-should set it to "\fC.*\fP".
-.IP
-This can be useful if you see the following behavior: you address an e\-mail
-to user ID "stevef" whose full name is "Steve Franklin". If NeoMutt expands
-"stevef" to '"Franklin" stevef@foo.bar' then you should set the $gecos_mask to
-a regular expression that will match the whole name so NeoMutt will expand
-"Franklin" to "Franklin, Steve".
-
-
-.TP
-.B group_index_format
-.nf
-Type: string
-Default: "%4C %M%N %5s %\-45.45f %d"
-.fi
-.IP
-This variable allows you to customize the newsgroup browser display to
-your personal taste. This string is similar to "index_format", but
-has its own set of printf()\-like sequences:
-.RS
-.PD 0
-.TP
-%C
-Current newsgroup number
-.TP
-%d
-Description of newsgroup (becomes from server)
-.TP
-%f
-Newsgroup name
-.TP
-%M
-\- if newsgroup not allowed for direct post (moderated for example)
-.TP
-%N
-N if newsgroup is new, u if unsubscribed, blank otherwise
-.TP
-%n
-Number of new articles in newsgroup
-.TP
-%s
-Number of unread articles in newsgroup
-.TP
-%>X
-Right justify the rest of the string and pad with character "X"
-.TP
-%|X
-Pad to the end of the line with character "X"
-.RE
-.PD 1
-
-.TP
-.B hdrs
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIunset\fP, the header fields normally added by the "my_hdr"
-command are not created. This variable \fImust\fP be unset before
-composing a new message or replying in order to take effect. If \fIset\fP,
-the user defined header fields are added to every new message.
-
-
-.TP
-.B header
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, this variable causes NeoMutt to include the header
-of the message you are replying to into the edit buffer.
-The $weed setting applies.
-
-
-.TP
-.B header_cache
-.nf
-Type: path
-Default: ""
-.fi
-.IP
-This variable points to the header cache database. If the path points to
-an existing directory, NeoMutt will create a dedicated header cache
-database per folder. Otherwise, the path points to a regular file, which
-will be created as needed and used as a shared global header cache for
-all folders.
-By default it is \fIunset\fP so no header caching will be used.
-.IP
-Header caching can greatly improve speed when opening POP, IMAP
-MH or Maildir folders, see "caching" for details.
-
-
-.TP
-.B header_cache_backend
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-This variable specifies the header cache backend. By default it is
-\fIunset\fP so no header caching will be used.
-
-
-.TP
-.B header_cache_compress_level
-.nf
-Type: number
-Default: 1
-.fi
-.IP
-When NeoMutt is compiled with lz4, zstd or zlib, this option can be used
-to setup the compression level.
-
-
-.TP
-.B header_cache_compress_method
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-When NeoMutt is compiled with lz4, zstd or zlib, the header cache backend
-can use these compression methods for compressing the cache files.
-This results in much smaller cache file sizes and may even improve speed.
-
-
-.TP
-.B header_color_partial
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, color header regexes behave like color body regexes:
-color is applied to the exact text matched by the regex. When
-\fIunset\fP, color is applied to the entire header.
-.IP
-One use of this option might be to apply color to just the header labels.
-.IP
-See "color" for more details.
-
-
-.TP
-.B help
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, help lines describing the bindings for the major functions
-provided by each menu are displayed on the first line of the screen.
-.IP
-\fBNote:\fP The binding will not be displayed correctly if the
-function is bound to a sequence rather than a single keystroke. Also,
-the help line may not be updated if a binding is changed while NeoMutt is
-running. Since this variable is primarily aimed at new users, neither
-of these should present a major problem.
-
-
-.TP
-.B hidden_host
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt will skip the host name part of $hostname variable
-when adding the domain part to addresses. This variable does not
-affect the generation of Message\-IDs, and it will not lead to the
-cut\-off of first\-level domains.
-
-
-.TP
-.B hidden_tags
-.nf
-Type: string list
-Default: "unread,draft,flagged,passed,replied,attachment,signed,encrypted"
-.fi
-.IP
-This variable specifies private notmuch/imap tags which should not be printed
-on screen.
-
-
-.TP
-.B hide_limited
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt will not show the presence of messages that are hidden
-by limiting, in the thread tree.
-
-
-.TP
-.B hide_missing
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will not show the presence of missing messages in the
-thread tree.
-
-
-.TP
-.B hide_thread_subject
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will not show the subject of messages in the thread
-tree that have the same subject as their parent or closest previously
-displayed sibling.
-
-
-.TP
-.B hide_top_limited
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt will not show the presence of messages that are hidden
-by limiting, at the top of threads in the thread tree. Note that when
-$hide_limited is \fIset\fP, this option will have no effect.
-
-
-.TP
-.B hide_top_missing
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will not show the presence of missing messages at the
-top of threads in the thread tree. Note that when $hide_missing is
-\fIset\fP, this option will have no effect.
-
-
-.TP
-.B history
-.nf
-Type: number
-Default: 10
-.fi
-.IP
-This variable controls the size (in number of strings remembered) of
-the string history buffer per category. The buffer is cleared each time the
-variable is set.
-
-
-.TP
-.B history_file
-.nf
-Type: path
-Default: "~/.mutthistory"
-.fi
-.IP
-The file in which NeoMutt will save its history.
-.IP
-Also see $save_history.
-
-
-.TP
-.B history_remove_dups
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, all of the string history will be scanned for duplicates
-when a new entry is added. Duplicate entries in the $history_file will
-also be removed when it is periodically compacted.
-
-
-.TP
-.B honor_disposition
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt will not display attachments with a
-disposition of "attachment" inline even if it could
-render the part to plain text. These MIME parts can only
-be viewed from the attachment menu.
-.IP
-If \fIunset\fP, NeoMutt will render all MIME parts it can
-properly transform to plain text.
-
-
-.TP
-.B honor_followup_to
-.nf
-Type: quadoption
-Default: yes
-.fi
-.IP
-This variable controls whether or not a Mail\-Followup\-To header is
-honored when group\-replying to a message.
-
-
-.TP
-.B hostname
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-Specifies the fully\-qualified hostname of the system NeoMutt is running on
-containing the host's name and the DNS domain it belongs to. It is used
-as the domain part (after "@") for local email addresses as well as
-Message\-Id headers.
-.IP
-If not specified in a config file, then NeoMutt will try to determine the hostname itself.
-.IP
-Optionally, NeoMutt can be compiled with a fixed domain name.
-.IP
-Also see $use_domain and $hidden_host.
-
-
-.TP
-.B idn_decode
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will show you international domain names decoded.
-Note: You can use IDNs for addresses even if this is \fIunset\fP.
-This variable only affects decoding. (IDN only)
-
-
-.TP
-.B idn_encode
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will encode international domain names using
-IDN. Unset this if your SMTP server can handle newer (RFC6531)
-UTF\-8 encoded domains. (IDN only)
-
-
-.TP
-.B ignore_list_reply_to
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Affects the behavior of the \fC<reply>\fP function when replying to
-messages from mailing lists (as defined by the "subscribe" or
-"lists" commands). When \fIset\fP, if the "Reply\-To:" field is
-set to the same value as the "To:" field, NeoMutt assumes that the
-"Reply\-To:" field was set by the mailing list to automate responses
-to the list, and will ignore this field. To direct a response to the
-mailing list when this option is \fIset\fP, use the \fC<list-reply>\fP
-function; \fC<group\-reply>\fP will reply to both the sender and the
-list.
-
-
-.TP
-.B imap_authenticators
-.nf
-Type: string list
-Default: ""
-.fi
-.IP
-This is a colon\-delimited list of authentication methods NeoMutt may
-attempt to use to log in to an IMAP server, in the order NeoMutt should
-try them. Authentication methods are either "login" or the right
-side of an IMAP "AUTH=xxx" capability string, e.g. "digest\-md5", "gssapi"
-or "cram\-md5". This option is case\-insensitive. If it's
-\fIunset\fP (the default) NeoMutt will try all available methods,
-in order from most\-secure to least\-secure.
-.IP
-Example:
-
-.IP
-.EX
-set imap_authenticators="gssapi:cram\-md5:login"
-
-.EE
-.IP
-\fBNote:\fP NeoMutt will only fall back to other authentication methods if
-the previous methods are unavailable. If a method is available but
-authentication fails, NeoMutt will not connect to the IMAP server.
-
-
-.TP
-.B imap_check_subscribed
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt will fetch the set of subscribed folders from
-your server whenever a mailbox is \fBselected\fP, and add them to the set
-of mailboxes it polls for new mail just as if you had issued individual
-"mailboxes" commands.
-
-
-.TP
-.B imap_condstore
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt will use the CONDSTORE extension (RFC7162)
-if advertised by the server. NeoMutt's current implementation is basic,
-used only for initial message fetching and flag updates.
-.IP
-For some IMAP servers, enabling this will slightly speed up
-downloading initial messages. Unfortunately, Gmail is not one
-those, and displays worse performance when enabled. Your
-mileage may vary.
-
-
-.TP
-.B imap_deflate
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will use the COMPRESS=DEFLATE extension (RFC4978)
-if advertised by the server.
-.IP
-In general a good compression efficiency can be achieved, which
-speeds up reading large mailboxes also on fairly good connections.
-
-
-.TP
-.B imap_delim_chars
-.nf
-Type: string
-Default: "/."
-.fi
-.IP
-This contains the list of characters that NeoMutt will use as folder
-separators for IMAP paths, when no separator is provided on the IMAP
-connection.
-
-
-.TP
-.B imap_fetch_chunk_size
-.nf
-Type: number (long)
-Default: 0
-.fi
-.IP
-When set to a value greater than 0, new headers will be
-downloaded in groups of this many headers per request. If you
-have a very large mailbox, this might prevent a timeout and
-disconnect when opening the mailbox, by sending a FETCH per set
-of this many headers, instead of a single FETCH for all new
-headers.
-
-
-.TP
-.B imap_headers
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-NeoMutt requests these header fields in addition to the default headers
-("Date:", "From:", "Sender:", "Subject:", "To:", "Cc:", "Message\-Id:",
-"References:", "Content\-Type:", "Content\-Description:", "In\-Reply\-To:",
-"Reply\-To:", "Lines:", "List\-Post:", "X\-Label:") from IMAP
-servers before displaying the index menu. You may want to add more
-headers for spam detection.
-.IP
-\fBNote:\fP This is a space separated list, items should be uppercase
-and not contain the colon, e.g. "X\-BOGOSITY X\-SPAM\-STATUS" for the
-"X\-Bogosity:" and "X\-Spam\-Status:" header fields.
-
-
-.TP
-.B imap_idle
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt will attempt to use the IMAP IDLE extension
-to check for new mail in the current mailbox. Some servers
-(dovecot was the inspiration for this option) react badly
-to NeoMutt's implementation. If your connection seems to freeze
-up periodically, try unsetting this.
-
-
-.TP
-.B imap_keepalive
-.nf
-Type: number
-Default: 300
-.fi
-.IP
-This variable specifies the maximum amount of time in seconds that NeoMutt
-will wait before polling open IMAP connections, to prevent the server
-from closing them before NeoMutt has finished with them. The default is
-well within the RFC\-specified minimum amount of time (30 minutes) before
-a server is allowed to do this, but in practice the RFC does get
-violated every now and then. Reduce this number if you find yourself
-getting disconnected from your IMAP server due to inactivity.
-
-
-.TP
-.B imap_list_subscribed
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-This variable configures whether IMAP folder browsing will look for
-only subscribed folders or all folders. This can be toggled in the
-IMAP browser with the \fC<toggle\-subscribed>\fP function.
-
-
-.TP
-.B imap_login
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-Your login name on the IMAP server.
-.IP
-This variable defaults to the value of $imap_user.
-
-
-.TP
-.B imap_oauth_refresh_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-The command to run to generate an OAUTH refresh token for
-authorizing your connection to your IMAP server. This command will be
-run on every connection attempt that uses the OAUTHBEARER authentication
-mechanism. See "oauth" for details.
-
-
-.TP
-.B imap_pass
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-Specifies the password for your IMAP account. If \fIunset\fP, NeoMutt will
-prompt you for your password when you invoke the \fC<imap\-fetch\-mail>\fP function
-or try to open an IMAP folder.
-.IP
-\fBWarning\fP: you should only use this option when you are on a
-fairly secure machine, because the superuser can read your neomuttrc even
-if you are the only one who can read the file.
-
-
-.TP
-.B imap_passive
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will not open new IMAP connections to check for new
-mail. NeoMutt will only check for new mail over existing IMAP
-connections. This is useful if you don't want to be prompted for
-user/password pairs on NeoMutt invocation, or if opening the connection
-is slow.
-
-
-.TP
-.B imap_peek
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will avoid implicitly marking your mail as read whenever
-you fetch a message from the server. This is generally a good thing,
-but can make closing an IMAP folder somewhat slower. This option
-exists to appease speed freaks.
-
-
-.TP
-.B imap_pipeline_depth
-.nf
-Type: number
-Default: 15
-.fi
-.IP
-Controls the number of IMAP commands that may be queued up before they
-are sent to the server. A deeper pipeline reduces the amount of time
-NeoMutt must wait for the server, and can make IMAP servers feel much
-more responsive. But not all servers correctly handle pipelined commands,
-so if you have problems you might want to try setting this variable to 0.
-.IP
-\fBNote:\fP Changes to this variable have no effect on open connections.
-
-
-.TP
-.B imap_poll_timeout
-.nf
-Type: number
-Default: 15
-.fi
-.IP
-This variable specifies the maximum amount of time in seconds
-that NeoMutt will wait for a response when polling IMAP connections
-for new mail, before timing out and closing the connection. Set
-to 0 to disable timing out.
-
-
-.TP
-.B imap_qresync
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt will use the QRESYNC extension (RFC7162)
-if advertised by the server. NeoMutt's current implementation is basic,
-used only for initial message fetching and flag updates.
-.IP
-Note: this feature is currently experimental. If you experience
-strange behavior, such as duplicate or missing messages please
-file a bug report to let us know.
-
-
-.TP
-.B imap_rfc5161
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will use the IMAP ENABLE extension (RFC5161) to
-select CAPABILITIES. Some servers (notably Coremail System IMap Server) do
-not properly respond to ENABLE commands, which might cause NeoMutt to hang.
-If your connection seems to freeze at login, try unsetting this. See also
-https://github.com/neomutt/neomutt/issues/1689
-
-
-.TP
-.B imap_servernoise
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will display warning messages from the IMAP
-server as error messages. Since these messages are often
-harmless, or generated due to configuration problems on the
-server which are out of the users' hands, you may wish to suppress
-them at some point.
-
-
-.TP
-.B imap_user
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-The name of the user whose mail you intend to access on the IMAP
-server.
-.IP
-This variable defaults to your user name on the local machine.
-
-
-.TP
-.B implicit_autoview
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If set to "yes", NeoMutt will look for a mailcap entry with the
-"\fCcopiousoutput\fP" flag set for \fIevery\fP MIME attachment it doesn't have
-an internal viewer defined for. If such an entry is found, NeoMutt will
-use the viewer defined in that entry to convert the body part to text
-form.
-
-
-.TP
-.B include
-.nf
-Type: quadoption
-Default: ask\-yes
-.fi
-.IP
-Controls whether or not a copy of the message(s) you are replying to
-is included in your reply.
-
-
-.TP
-.B include_encrypted
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Controls whether or not NeoMutt includes separately encrypted attachment
-contents when replying.
-.IP
-This variable was added to prevent accidental exposure of encrypted
-contents when replying to an attacker. If a previously encrypted message
-were attached by the attacker, they could trick an unwary recipient into
-decrypting and including the message in their reply.
-
-
-.TP
-.B include_onlyfirst
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Controls whether or not NeoMutt includes only the first attachment
-of the message you are replying.
-
-
-.TP
-.B indent_string
-.nf
-Type: string
-Default: "> "
-.fi
-.IP
-Specifies the string to prepend to each line of text quoted in a
-message to which you are replying. You are strongly encouraged not to
-change this value, as it tends to agitate the more fanatical netizens.
-.IP
-The value of this option is ignored if $text_flowed is set, because
-the quoting mechanism is strictly defined for format=flowed.
-.IP
-This option is a format string, please see the description of
-$index_format for supported \fCprintf(3)\fP\-style sequences.
-
-
-.TP
-.B index_format
-.nf
-Type: string
-Default: "%4C %Z %{%b %d} %\-15.15L (%?l?%4l&%4c?) %s"
-.fi
-.IP
-This variable allows you to customize the message index display to
-your personal taste.
-.IP
-"Format strings" are similar to the strings used in the C
-function \fCprintf(3)\fP to format output (see the man page for more details).
-For an explanation of the %? construct, see the status_format description.
-The following sequences are defined in NeoMutt:
-.RS
-.PD 0
-.TP
-%a
-Address of the author
-.TP
-%A
-Reply\-to address (if present; otherwise: address of author)
-.TP
-%b
-Filename of the original message folder (think mailbox)
-.TP
-%B
-The list to which the letter was sent, or else the folder name (%b).
-.TP
-%C
-Current message number
-.TP
-%c
-Number of characters (bytes) in the body of the message (see formatstrings-size)
-.TP
-%cr
-Number of characters (bytes) in the raw message, including the header (see formatstrings-size)
-.TP
-%D
-Date and time of message using date_format and local timezone
-.TP
-%d
-Date and time of message using date_format and sender's timezone
-.TP
-%e
-Current message number in thread
-.TP
-%E
-Number of messages in current thread
-.TP
-%F
-Author name, or recipient name if the message is from you
-.TP
-%Fp
-Like %F, but plain. No contextual formatting is applied to recipient name
-.TP
-%f
-Sender (address + real name), either From: or Return\-Path:
-.TP
-%g
-Newsgroup name (if compiled with NNTP support)
-.TP
-%g
-Message tags (e.g. notmuch tags/imap flags)
-.TP
-%Gx
-Individual message tag (e.g. notmuch tags/imap flags)
-.TP
-%H
-Spam attribute(s) of this message
-.TP
-%I
-Initials of author
-.TP
-%i
-Message\-id of the current message
-.TP
-%J
-Message tags (if present, tree unfolded, and != parent's tags)
-.TP
-%K
-The list to which the letter was sent (if any; otherwise: empty)
-.TP
-%L
-If an address in the "To:" or "Cc:" header field matches an address
-Defined by the user's "subscribe" command, this displays
-"To <list\-name>", otherwise the same as %F
-.TP
-%l
-number of lines in the unprocessed message (may not work with
-maildir, mh, and IMAP folders)
-.TP
-%M
-Number of hidden messages if the thread is collapsed
-.TP
-%m
-Total number of message in the mailbox
-.TP
-%N
-Message score
-.TP
-%n
-Author's real name (or address if missing)
-.TP
-%O
-Original save folder where NeoMutt would formerly have
-Stashed the message: list name or recipient name
-If not sent to a list
-.TP
-%P
-Progress indicator for the built\-in pager (how much of the file has been displayed)
-.TP
-%q
-Newsgroup name (if compiled with NNTP support)
-.TP
-%R
-Comma separated list of "Cc:" recipients
-.TP
-%r
-Comma separated list of "To:" recipients
-.TP
-%S
-Single character status of the message ("N"/"O"/"D"/"d"/"!"/"r"/"*")
-.TP
-%s
-Subject of the message
-.TP
-%T
-The appropriate character from the $to_chars string
-.TP
-%t
-"To:" field (recipients)
-.TP
-%u
-User (login) name of the author
-.TP
-%v
-First name of the author, or the recipient if the message is from you
-.TP
-%W
-Name of organization of author ("Organization:" field)
-.TP
-%x
-"X\-Comment\-To:" field (if present and compiled with NNTP support)
-.TP
-%X
-Number of MIME attachments
-(please see the "attachments" section for possible speed effects)
-.TP
-%Y
-"X\-Label:" field, if present, and \fI(1)\fP not at part of a thread tree,
-\fI(2)\fP at the top of a thread, or \fI(3)\fP "X\-Label:" is different from
-Preceding message's "X\-Label:"
-.TP
-%y
-"X\-Label:" field, if present
-.TP
-%Z
-A three character set of message status flags.
-The first character is new/read/replied flags ("n"/"o"/"r"/"O"/"N").
-The second is deleted or encryption flags ("D"/"d"/"S"/"P"/"s"/"K").
-The third is either tagged/flagged ("*"/"!"), or one of the characters
-Listed in $to_chars.
-.TP
-%zc
-Message crypto flags
-.TP
-%zs
-Message status flags
-.TP
-%zt
-Message tag flags
-.TP
-%@name@
-insert and evaluate format\-string from the matching
-"index-format-hook" command
-.TP
-%{fmt}
-the date and time of the message is converted to sender's
-time zone, and "fmt" is expanded by the library function
-\fCstrftime(3)\fP; a leading bang disables locales
-.TP
-%[fmt]
-the date and time of the message is converted to the local
-time zone, and "fmt" is expanded by the library function
-\fCstrftime(3)\fP; a leading bang disables locales
-.TP
-%(fmt)
-the local date and time when the message was received.
-"fmt" is expanded by the library function \fCstrftime(3)\fP;
-a leading bang disables locales
-.TP
-%>X
-right justify the rest of the string and pad with character "X"
-.TP
-%|X
-pad to the end of the line with character "X"
-.TP
-%*X
-soft\-fill with character "X" as pad
-.RE
-.PD 1
-.IP
-Date format expressions can be constructed based on relative dates. Using
-the date formatting operators along with nested conditionals, the date
-format can be modified based on how old a message is. See the section on
-"Conditional Dates" for an explanation and examples
-.IP
-Note that for mbox/mmdf, "%l" applies to the unprocessed message, and
-for maildir/mh, the value comes from the "Lines:" header field when
-present (the meaning is normally the same). Thus the value depends on
-the encodings used in the different parts of the message and has little
-meaning in practice.
-.IP
-"Soft\-fill" deserves some explanation: Normal right\-justification
-will print everything to the left of the "%>", displaying padding and
-whatever lies to the right only if there's room. By contrast,
-soft\-fill gives priority to the right\-hand side, guaranteeing space
-to display it and showing padding only if there's still room. If
-necessary, soft\-fill will eat text leftwards to make room for
-rightward text.
-.IP
-Note that these expandos are supported in
-"save-hook", "fcc-hook" and "fcc-save-hook", too.
-
-
-.TP
-.B inews
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-If set, specifies the program and arguments used to deliver news posted
-by NeoMutt. Otherwise, NeoMutt posts article using current connection to
-news server. The following printf\-style sequence is understood:
-.RS
-.PD 0
-.TP
-%a
-account url
-.TP
-%p
-port
-.TP
-%P
-port if specified
-.TP
-%s
-news server name
-.TP
-%S
-url schema
-.TP
-%u
-username
-.RE
-.PD 1
-.IP
-Example:
-
-.IP
-.EX
-set inews="/usr/local/bin/inews \-hS"
-
-.EE
-
-
-.TP
-.B ispell
-.nf
-Type: command
-Default: "ispell"
-.fi
-.IP
-How to invoke ispell (GNU's spell\-checking software).
-
-
-.TP
-.B keep_flagged
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, read messages marked as flagged will not be moved
-from your spool mailbox to your $mbox mailbox, or as a result of
-a "mbox-hook" command.
-
-
-.TP
-.B mail_check
-.nf
-Type: number
-Default: 5
-.fi
-.IP
-This variable configures how often (in seconds) NeoMutt should look for
-new mail. Also see the $timeout variable.
-
-
-.TP
-.B mail_check_recent
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will only notify you about new mail that has been received
-since the last time you opened the mailbox. When \fIunset\fP, NeoMutt will notify you
-if any new mail exists in the mailbox, regardless of whether you have visited it
-recently.
-.IP
-When \fI$mark_old\fP is set, NeoMutt does not consider the mailbox to contain new
-mail if only old messages exist.
-
-
-.TP
-.B mail_check_stats
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt will periodically calculate message
-statistics of a mailbox while polling for new mail. It will
-check for unread, flagged, and total message counts. Because
-this operation is more performance intensive, it defaults to
-\fIunset\fP, and has a separate option, $mail_check_stats_interval, to
-control how often to update these counts.
-.IP
-Message statistics can also be explicitly calculated by invoking the
-\fC<check\-stats>\fP function.
-
-
-.TP
-.B mail_check_stats_interval
-.nf
-Type: number
-Default: 60
-.fi
-.IP
-When $mail_check_stats is \fIset\fP, this variable configures
-how often (in seconds) NeoMutt will update message counts.
-
-
-.TP
-.B mailcap_path
-.nf
-Type: string list
-Default: "~/.mailcap:/usr/share/neomutt/mailcap:/etc/mailcap:/etc/mailcap:/usr/etc/mailcap:/usr/local/etc/mailcap"
-.fi
-.IP
-This variable specifies which files to consult when attempting to
-display MIME bodies not directly supported by NeoMutt. The default value
-is generated during startup: see the "mailcap" section of the manual.
-.IP
-$mailcap_path is overridden by the environment variable \fC$MAILCAPS\fP.
-.IP
-The default search path is from RFC1524.
-
-
-.TP
-.B mailcap_sanitize
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP, NeoMutt will restrict possible characters in mailcap % expandos
-to a well\-defined set of safe characters. This is the safe setting,
-but we are not sure it doesn't break some more advanced MIME stuff.
-.IP
-\fBDON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE
-DOING!\fP
-
-
-.TP
-.B maildir_check_cur
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, NeoMutt will poll both the new and cur directories of
-a maildir folder for new messages. This might be useful if other
-programs interacting with the folder (e.g. dovecot) are moving new
-messages to the cur directory. Note that setting this option may
-slow down polling for new messages in large folders, since NeoMutt has
-to scan all cur messages.
-
-
-.TP
-.B maildir_header_cache_verify
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-Check for Maildir unaware programs other than NeoMutt having modified maildir
-files when the header cache is in use. This incurs one \fCstat(2)\fP per
-message every time the folder is opened (which can be very slow for NFS
-folders).
-
-
-.TP
-.B maildir_trash
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, messages marked as deleted will be saved with the maildir
-trashed flag instead of unlinked. \fBNote:\fP this only applies
-to maildir\-style mailboxes. Setting it will have no effect on other
-mailbox types.
-
-
-.TP
-.B mark_macro_prefix
-.nf
-Type: string
-Default: "'"
-.fi
-.IP
-Prefix for macros created using mark\-message. A new macro
-automatically generated with \fI<mark\-message>a\fP will be composed
-from this prefix and the letter \fIa\fP.
-
-
-.TP
-.B mark_old
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-Controls whether or not NeoMutt marks \fInew\fP \fBunread\fP
-messages as \fIold\fP if you exit a mailbox without reading them.
-With this option \fIset\fP, the next time you start NeoMutt, the messages
-will show up with an "O" next to them in the index menu,
-indicating that they are old.
-
-
-.TP
-.B markers
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-Controls the display of wrapped lines in the internal pager. If set, a
-"+" marker is displayed at the beginning of wrapped lines.
-.IP
-Also see the $smart_wrap variable.
-
-
-.TP
-.B mask
-.nf
-Type: regular expression
-Default: "!^\\.[^.]"
-.fi
-.IP
-A regular expression used in the file browser, optionally preceded by
-the \fInot\fP operator "!". Only files whose names match this mask
-will be shown. The match is always case\-sensitive.
-
-
-.TP
-.B mbox
-.nf
-Type: mailbox
-Default: "~/mbox"
-.fi
-.IP
-This specifies the folder into which read mail in your $spoolfile
-folder will be appended.
-.IP
-Also see the $move variable.
-
-
-.TP
-.B mbox_type
-.nf
-Type: enumeration
-Default: mbox
-.fi
-.IP
-The default mailbox type used when creating new folders. May be any of
-"mbox", "MMDF", "MH" or "Maildir".
-.IP
-This can also be set using the \fC\-m\fP command\-line option.
-
-
-.TP
-.B menu_context
-.nf
-Type: number
-Default: 0
-.fi
-.IP
-This variable controls the number of lines of context that are given
-when scrolling through menus. (Similar to $pager_context.)
-
-
-.TP
-.B menu_move_off
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIunset\fP, the bottom entry of menus will never scroll up past
-the bottom of the screen, unless there are less entries than lines.
-When \fIset\fP, the bottom entry may move off the bottom.
-
-
-.TP
-.B menu_scroll
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, menus will be scrolled up or down one line when you
-attempt to move across a screen boundary. If \fIunset\fP, the screen
-is cleared and the next or previous page of the menu is displayed
-(useful for slow links to avoid many redraws).
-
-
-.TP
-.B message_cache_clean
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, NeoMutt will clean out obsolete entries from the message cache when
-the mailbox is synchronized. You probably only want to set it
-every once in a while, since it can be a little slow
-(especially for large folders).
-
-
-.TP
-.B message_cachedir
-.nf
-Type: path
-Default: ""
-.fi
-.IP
-Set this to a directory and NeoMutt will cache copies of messages from
-your IMAP and POP servers here. You are free to remove entries at any
-time.
-.IP
-When setting this variable to a directory, NeoMutt needs to fetch every
-remote message only once and can perform regular expression searches
-as fast as for local folders.
-.IP
-Also see the $message_cache_clean variable.
-
-
-.TP
-.B message_format
-.nf
-Type: string
-Default: "%s"
-.fi
-.IP
-This is the string displayed in the "attachment" menu for
-attachments of type \fCmessage/rfc822\fP. For a full listing of defined
-\fCprintf(3)\fP\-like sequences see the section on $index_format.
-
-
-.TP
-.B meta_key
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, forces NeoMutt to interpret keystrokes with the high bit (bit 8)
-set as if the user had pressed the Esc key and whatever key remains
-after having the high bit removed. For example, if the key pressed
-has an ASCII value of \fC0xf8\fP, then this is treated as if the user had
-pressed Esc then "x". This is because the result of removing the
-high bit from \fC0xf8\fP is \fC0x78\fP, which is the ASCII character
-"x".
-
-
-.TP
-.B metoo
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIunset\fP, NeoMutt will remove your address (see the "alternates"
-command) from the list of recipients when replying to a message.
-
-
-.TP
-.B mh_purge
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIunset\fP, NeoMutt will mimic mh's behavior and rename deleted messages
-to \fI,<old file name>\fP in mh folders instead of really deleting
-them. This leaves the message on disk but makes programs reading the folder
-ignore it. If the variable is \fIset\fP, the message files will simply be
-deleted.
-.IP
-This option is similar to $maildir_trash for Maildir folders.
-
-
-.TP
-.B mh_seq_flagged
-.nf
-Type: string
-Default: "flagged"
-.fi
-.IP
-The name of the MH sequence used for flagged messages.
-
-
-.TP
-.B mh_seq_replied
-.nf
-Type: string
-Default: "replied"
-.fi
-.IP
-The name of the MH sequence used to tag replied messages.
-
-
-.TP
-.B mh_seq_unseen
-.nf
-Type: string
-Default: "unseen"
-.fi
-.IP
-The name of the MH sequence used for unseen messages.
-
-
-.TP
-.B mime_forward
-.nf
-Type: quadoption
-Default: no
-.fi
-.IP
-When \fIset\fP, the message you are forwarding will be attached as a
-separate \fCmessage/rfc822\fP MIME part instead of included in the main body of the
-message. This is useful for forwarding MIME messages so the receiver
-can properly view the message as it was delivered to you. If you like
-to switch between MIME and not MIME from mail to mail, set this
-variable to "ask\-no" or "ask\-yes".
-.IP
-Also see $forward_decode and $mime_forward_decode.
-
-
-.TP
-.B mime_forward_decode
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Controls the decoding of complex MIME messages into \fCtext/plain\fP when
-forwarding a message while $mime_forward is \fIset\fP. Otherwise
-$forward_decode is used instead.
-
-
-.TP
-.B mime_forward_rest
-.nf
-Type: quadoption
-Default: yes
-.fi
-.IP
-When forwarding multiple attachments of a MIME message from the attachment
-menu, attachments which can't be decoded in a reasonable manner will
-be attached to the newly composed message if this option is \fIset\fP.
-
-
-.TP
-.B mime_subject
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIunset\fP, 8\-bit "subject:" line in article header will not be
-encoded according to RFC2047 to base64. This is useful when message
-is Usenet article, because MIME for news is nonstandard feature.
-
-
-.TP
-.B mime_type_query_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This specifies a command to run, to determine the mime type of a
-new attachment when composing a message. Unless
-$mime_type_query_first is set, this will only be run if the
-attachment's extension is not found in the mime.types file.
-.IP
-The string may contain a "%s", which will be substituted with the
-attachment filename. NeoMutt will add quotes around the string substituted
-for "%s" automatically according to shell quoting rules, so you should
-avoid adding your own. If no "%s" is found in the string, NeoMutt will
-append the attachment filename to the end of the string.
-.IP
-The command should output a single line containing the
-attachment's mime type.
-.IP
-Suggested values are "xdg\-mime query filetype" or
-"file \-bi".
-
-
-.TP
-.B mime_type_query_first
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, the $mime_type_query_command will be run before the
-mime.types lookup.
-
-
-.TP
-.B mix_entry_format
-.nf
-Type: string
-Default: "%4n %c %\-16s %a"
-.fi
-.IP
-This variable describes the format of a remailer line on the mixmaster
-chain selection screen. The following \fCprintf(3)\fP\-like sequences are
-supported:
-.RS
-.PD 0
-.TP
-%a
-The remailer's e\-mail address
-.TP
-%c
-Remailer capabilities
-.TP
-%n
-The running number on the menu
-.TP
-%s
-The remailer's short name
-.TP
-%>X
-right justify the rest of the string and pad with character "X"
-.TP
-%|X
-pad to the end of the line with character "X"
-.TP
-%*X
-soft\-fill with character "X" as pad
-.RE
-.PD 1
-
-.TP
-.B mixmaster
-.nf
-Type: command
-Default: "mixmaster"
-.fi
-.IP
-This variable contains the path to the Mixmaster binary on your
-system. It is used with various sets of parameters to gather the
-list of known remailers, and to finally send a message through the
-mixmaster chain.
-
-
-.TP
-.B move
-.nf
-Type: quadoption
-Default: no
-.fi
-.IP
-Controls whether or not NeoMutt will move read messages
-from your spool mailbox to your $mbox mailbox, or as a result of
-a "mbox-hook" command.
-
-
-.TP
-.B narrow_tree
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-This variable, when \fIset\fP, makes the thread tree narrower, allowing
-deeper threads to fit on the screen.
-
-
-.TP
-.B net_inc
-.nf
-Type: number
-Default: 10
-.fi
-.IP
-Operations that expect to transfer a large amount of data over the
-network will update their progress every $net_inc kilobytes.
-If set to 0, no progress messages will be displayed.
-.IP
-See also $read_inc, $write_inc and $net_inc.
-
-
-.TP
-.B new_mail_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-If \fIset\fP, NeoMutt will call this command after a new message is received.
-See the $status_format documentation for the values that can be formatted
-into this command.
-
-
-.TP
-.B news_cache_dir
-.nf
-Type: path
-Default: "~/.neomutt"
-.fi
-.IP
-This variable pointing to directory where NeoMutt will save cached news
-articles and headers in. If \fIunset\fP, articles and headers will not be
-saved at all and will be reloaded from the server each time.
-
-
-.TP
-.B news_server
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-This variable specifies domain name or address of NNTP server.
-.IP
-You can also specify username and an alternative port for each news server,
-e.g. \fC[[s]news://][username[:password]@]server[:port]\fP
-.IP
-This option can also be set using the command line option "\-g", the
-environment variable \fC$NNTPSERVER\fP, or putting the server name in the
-file "/etc/nntpserver".
-
-
-.TP
-.B newsgroups_charset
-.nf
-Type: string
-Default: "utf\-8"
-.fi
-.IP
-Character set of newsgroups descriptions.
-
-
-.TP
-.B newsrc
-.nf
-Type: path
-Default: "~/.newsrc"
-.fi
-.IP
-The file, containing info about subscribed newsgroups \- names and
-indexes of read articles. The following printf\-style sequence
-is understood:
-.RS
-.PD 0
-.TP
-\fBExpando\fP
-\fBDescription\fP
-\fBExample\fP
-.TP
-%a
-Account url
-\fCnews:news.gmane.org\fP
-.TP
-%p
-Port
-\fC119\fP
-.TP
-%P
-Port if specified
-\fC10119\fP
-.TP
-%s
-News server name
-\fCnews.gmane.org\fP
-.TP
-%S
-Url schema
-\fCnews\fP
-.TP
-%u
-Username
-\fCusername\fP
-.RE
-.PD 1
-
-.TP
-.B nm_db_limit
-.nf
-Type: number
-Default: 0
-.fi
-.IP
-This variable specifies the default limit used in notmuch queries.
-
-
-.TP
-.B nm_default_url
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-This variable specifies the default Notmuch database in format
-notmuch://<absolute path>.
-
-
-.TP
-.B nm_exclude_tags
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-The messages tagged with these tags are excluded and not loaded
-from notmuch DB to NeoMutt unless specified explicitly.
-
-
-.TP
-.B nm_flagged_tag
-.nf
-Type: string
-Default: "flagged"
-.fi
-.IP
-This variable specifies notmuch tag which is used for flagged messages. The
-variable is used to count flagged messages in DB and set the flagged flag when
-modifying tags. All other NeoMutt commands use standard (e.g. maildir) flags.
-
-
-.TP
-.B nm_open_timeout
-.nf
-Type: number
-Default: 5
-.fi
-.IP
-This variable specifies the timeout for database open in seconds.
-
-
-.TP
-.B nm_query_type
-.nf
-Type: string
-Default: "messages"
-.fi
-.IP
-This variable specifies the default query type (threads or messages) used in notmuch queries.
-
-
-.TP
-.B nm_query_window_current_position
-.nf
-Type: number
-Default: 0
-.fi
-.IP
-This variable contains the position of the current search for window based vfolder.
-
-
-.TP
-.B nm_query_window_current_search
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-This variable contains the currently setup notmuch search for window based vfolder.
-
-
-.TP
-.B nm_query_window_duration
-.nf
-Type: number
-Default: 0
-.fi
-.IP
-This variable sets the time duration of a windowed notmuch query.
-Accepted values all non negative integers. A value of 0 disables the feature.
-
-
-.TP
-.B nm_query_window_timebase
-.nf
-Type: string
-Default: "week"
-.fi
-.IP
-This variable sets the time base of a windowed notmuch query.
-Accepted values are 'minute', 'hour', 'day', 'week', 'month', 'year'
-
-
-.TP
-.B nm_record
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-This variable specifies if the NeoMutt record should indexed by notmuch.
-
-
-.TP
-.B nm_record_tags
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-This variable specifies the default tags applied to messages stored to the NeoMutt record.
-When set to 0 this variable disable the window feature.
-
-
-.TP
-.B nm_replied_tag
-.nf
-Type: string
-Default: "replied"
-.fi
-.IP
-This variable specifies notmuch tag which is used for replied messages. The
-variable is used to set the replied flag when modifiying tags. All other NeoMutt
-commands use standard (e.g. maildir) flags.
-
-
-.TP
-.B nm_unread_tag
-.nf
-Type: string
-Default: "unread"
-.fi
-.IP
-This variable specifies notmuch tag which is used for unread messages. The
-variable is used to count unread messages in DB and set the unread flag when
-modifiying tags. All other NeoMutt commands use standard (e.g. maildir) flags.
-
-
-.TP
-.B nntp_authenticators
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-This is a colon\-delimited list of authentication methods NeoMutt may
-attempt to use to log in to a news server, in the order NeoMutt should
-try them. Authentication methods are either "user" or any
-SASL mechanism, e.g. "digest\-md5", "gssapi" or "cram\-md5".
-This option is case\-insensitive. If it's \fIunset\fP (the default)
-NeoMutt will try all available methods, in order from most\-secure to
-least\-secure.
-.IP
-Example:
-
-.IP
-.EX
-set nntp_authenticators="digest\-md5:user"
-
-.EE
-.IP
-\fBNote:\fP NeoMutt will only fall back to other authentication methods if
-the previous methods are unavailable. If a method is available but
-authentication fails, NeoMutt will not connect to the IMAP server.
-
-
-.TP
-.B nntp_context
-.nf
-Type: number
-Default: 1000
-.fi
-.IP
-This variable defines number of articles which will be in index when
-newsgroup entered. If active newsgroup have more articles than this
-number, oldest articles will be ignored. Also controls how many
-articles headers will be saved in cache when you quit newsgroup.
-
-
-.TP
-.B nntp_listgroup
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-This variable controls whether or not existence of each article is
-checked when newsgroup is entered.
-
-
-.TP
-.B nntp_load_description
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-This variable controls whether or not descriptions for each newsgroup
-must be loaded when newsgroup is added to list (first time list
-loading or new newsgroup adding).
-
-
-.TP
-.B nntp_pass
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-Your password for NNTP account.
-
-
-.TP
-.B nntp_poll
-.nf
-Type: number
-Default: 60
-.fi
-.IP
-The time in seconds until any operations on newsgroup except post new
-article will cause recheck for new news. If set to 0, NeoMutt will
-recheck newsgroup on each operation in index (stepping, read article,
-etc.).
-
-
-.TP
-.B nntp_user
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-Your login name on the NNTP server. If \fIunset\fP and NNTP server requires
-authentication, NeoMutt will prompt you for your account name when you
-connect to news server.
-
-
-.TP
-.B pager
-.nf
-Type: command
-Default: "builtin"
-.fi
-.IP
-This variable specifies which pager you would like to use to view
-messages. The value "builtin" means to use the built\-in pager, otherwise this
-variable should specify the pathname of the external pager you would
-like to use.
-.IP
-Using an external pager may have some disadvantages: Additional
-keystrokes are necessary because you can't call NeoMutt functions
-directly from the pager, and screen resizes cause lines longer than
-the screen width to be badly formatted in the help menu.
-
-
-.TP
-.B pager_context
-.nf
-Type: number
-Default: 0
-.fi
-.IP
-This variable controls the number of lines of context that are given
-when displaying the next or previous page in the internal pager. By
-default, NeoMutt will display the line after the last one on the screen
-at the top of the next page (0 lines of context).
-.IP
-This variable also specifies the amount of context given for search
-results. If positive, this many lines will be given before a match,
-if 0, the match will be top\-aligned.
-
-
-.TP
-.B pager_format
-.nf
-Type: string
-Default: "\-%Z\- %C/%m: %\-20.20n %s%* \-\- (%P)"
-.fi
-.IP
-This variable controls the format of the one\-line message "status"
-displayed before each message in either the internal or an external
-pager. The valid sequences are listed in the $index_format
-section.
-
-
-.TP
-.B pager_index_lines
-.nf
-Type: number
-Default: 0
-.fi
-.IP
-Determines the number of lines of a mini\-index which is shown when in
-the pager. The current message, unless near the top or bottom of the
-folder, will be roughly one third of the way down this mini\-index,
-giving the reader the context of a few messages before and after the
-message. This is useful, for example, to determine how many messages
-remain to be read in the current thread. A value of 0 results in no index
-being shown. If the number of messages in the current folder is less than
-$pager_index_lines, then the index will only use as many lines as it needs.
-
-
-.TP
-.B pager_stop
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, the internal\-pager will \fBnot\fP move to the next message
-when you are at the end of a message and invoke the \fC<next\-page>\fP
-function.
-
-
-.TP
-.B pattern_format
-.nf
-Type: string
-Default: "%2n %\-15e %d"
-.fi
-.IP
-This variable describes the format of the "pattern completion" menu. The
-following \fCprintf(3)\fP\-style sequences are understood:
-.RS
-.PD 0
-.TP
-%d
-pattern description
-.TP
-%e
-pattern expression
-.TP
-%n
-index number
-.RE
-.PD 1
-.IP
-
-
-.TP
-.B pgp_auto_decode
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, NeoMutt will automatically attempt to decrypt traditional PGP
-messages whenever the user performs an operation which ordinarily would
-result in the contents of the message being operated on. For example,
-if the user displays a pgp\-traditional message which has not been manually
-checked with the \fC<check-traditional-pgp>\fP function, NeoMutt will automatically
-check the message for traditional pgp.
-
-
-.TP
-.B pgp_autoinline
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-This option controls whether NeoMutt generates old\-style inline
-(traditional) PGP encrypted or signed messages under certain
-circumstances. This can be overridden by use of the pgp menu,
-when inline is not required. The GPGME backend does not support
-this option.
-.IP
-Note that NeoMutt might automatically use PGP/MIME for messages
-which consist of more than a single MIME part. NeoMutt can be
-configured to ask before sending PGP/MIME messages when inline
-(traditional) would not work.
-.IP
-Also see the $pgp_mime_auto variable.
-.IP
-Also note that using the old\-style PGP message format is \fBstrongly\fP
-\fBdeprecated\fP.
-(PGP only)
-
-
-.TP
-.B pgp_check_exit
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP, NeoMutt will check the exit code of the PGP subprocess when
-signing or encrypting. A non\-zero exit code means that the
-subprocess failed.
-(PGP only)
-
-
-.TP
-.B pgp_check_gpg_decrypt_status_fd
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP, NeoMutt will check the status file descriptor output
-of $pgp_decrypt_command and $pgp_decode_command for GnuPG status codes
-indicating successful decryption. This will check for the presence of
-DECRYPTION_OKAY, absence of DECRYPTION_FAILED, and that all
-PLAINTEXT occurs between the BEGIN_DECRYPTION and END_DECRYPTION
-status codes.
-.IP
-If \fIunset\fP, NeoMutt will instead match the status fd output
-against $pgp_decryption_okay.
-(PGP only)
-
-
-.TP
-.B pgp_clearsign_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This format is used to create an old\-style "clearsigned" PGP
-message. Note that the use of this format is \fBstrongly\fP
-\fBdeprecated\fP.
-.IP
-This is a format string, see the $pgp_decode_command command for
-possible \fCprintf(3)\fP\-like sequences.
-Note that in this case, %r expands to the search string, which is a list of
-one or more quoted values such as email address, name, or keyid.
-(PGP only)
-
-
-.TP
-.B pgp_decode_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This format strings specifies a command which is used to decode
-application/pgp attachments.
-.IP
-The PGP command formats have their own set of \fCprintf(3)\fP\-like sequences:
-.RS
-.PD 0
-.TP
-%a
-The value of $pgp_sign_as if set, otherwise the value
-of $pgp_default_key.
-.TP
-%f
-Expands to the name of a file containing a message.
-.TP
-%p
-Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty
-string otherwise. Note: This may be used with a %? construct.
-.TP
-%r
-One or more key IDs (or fingerprints if available).
-.TP
-%s
-Expands to the name of a file containing the signature part
-of a \fCmultipart/signed\fP attachment when verifying it.
-.RE
-.PD 1
-.IP
-For examples on how to configure these formats for the various versions
-of PGP which are floating around, see the pgp and gpg sample configuration files in
-the \fCsamples/\fP subdirectory which has been installed on your system
-alongside the documentation.
-(PGP only)
-
-
-.TP
-.B pgp_decrypt_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to decrypt a PGP encrypted message.
-.IP
-This is a format string, see the $pgp_decode_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(PGP only)
-.IP
-Note: When decrypting messages using \fCgpg\fP, a pinentry program needs to
-be invoked unless the password is cached within \fCgpg\-agent\fP.
-Currently, the \fCpinentry\-tty\fP program (usually distributed with
-\fCgpg\fP) isn't suitable for being invoked by NeoMutt. You are encouraged
-to use a different pinentry\-program when running NeoMutt in order to avoid
-problems.
-.IP
-See also: https://github.com/neomutt/neomutt/issues/1014
-
-
-.TP
-.B pgp_decryption_okay
-.nf
-Type: regular expression
-Default: ""
-.fi
-.IP
-If you assign text to this variable, then an encrypted PGP
-message is only considered successfully decrypted if the output
-from $pgp_decrypt_command contains the text. This is used to
-protect against a spoofed encrypted message, with multipart/encrypted
-headers but containing a block that is not actually encrypted.
-(e.g. simply signed and ascii armored text).
-.IP
-Note that if $pgp_check_gpg_decrypt_status_fd is set, this variable
-is ignored.
-(PGP only)
-
-
-.TP
-.B pgp_default_key
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-This is the default key\-pair to use for PGP operations. It will be
-used for encryption (see $postpone_encrypt and $pgp_self_encrypt).
-.IP
-It will also be used for signing unless $pgp_sign_as is set.
-.IP
-The (now deprecated) \fIpgp_self_encrypt_as\fP is an alias for this
-variable, and should no longer be used.
-(PGP only)
-
-
-.TP
-.B pgp_encrypt_only_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to encrypt a body part without signing it.
-.IP
-This is a format string, see the $pgp_decode_command command for
-possible \fCprintf(3)\fP\-like sequences.
-Note that in this case, %r expands to the search string, which is a list of
-one or more quoted values such as email address, name, or keyid.
-(PGP only)
-
-
-.TP
-.B pgp_encrypt_sign_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to both sign and encrypt a body part.
-.IP
-This is a format string, see the $pgp_decode_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(PGP only)
-
-
-.TP
-.B pgp_entry_format
-.nf
-Type: string
-Default: "%4n %t%f %4l/0x%k %\-4a %2c %u"
-.fi
-.IP
-This variable allows you to customize the PGP key selection menu to
-your personal taste. If $crypt_use_gpgme is \fIset\fP, then it applies
-to S/MIME key selection menu also. This string is similar to $index_format,
-but has its own set of \fCprintf(3)\fP\-like sequences:
-.RS
-.PD 0
-.TP
-%a
-Algorithm
-.TP
-%c
-Capabilities
-.TP
-%f
-Flags
-.TP
-%k
-Key id
-.TP
-%l
-Key length
-.TP
-%n
-Number
-.TP
-%p
-Protocol
-.TP
-%t
-Trust/validity of the key\-uid association
-.TP
-%u
-User id
-.TP
-%[<s>]
-Date of the key where <s> is an \fCstrftime(3)\fP expression
-.RE
-.PD 1
-.IP
-(Crypto only) or (PGP only when GPGME disabled)
-
-
-.TP
-.B pgp_export_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to export a public key from the user's
-key ring.
-.IP
-This is a format string, see the $pgp_decode_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(PGP only)
-
-
-.TP
-.B pgp_getkeys_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is invoked whenever NeoMutt needs to fetch the public key associated with
-an email address. Of the sequences supported by $pgp_decode_command, %r is
-the only \fCprintf(3)\fP\-like sequence used with this format. Note that
-in this case, %r expands to the email address, not the public key ID (the key ID is
-unknown, which is why NeoMutt is invoking this command).
-(PGP only)
-
-
-.TP
-.B pgp_good_sign
-.nf
-Type: regular expression
-Default: ""
-.fi
-.IP
-If you assign a text to this variable, then a PGP signature is only
-considered verified if the output from $pgp_verify_command contains
-the text. Use this variable if the exit code from the command is 0
-even for bad signatures.
-(PGP only)
-
-
-.TP
-.B pgp_ignore_subkeys
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-Setting this variable will cause NeoMutt to ignore OpenPGP subkeys. Instead,
-the principal key will inherit the subkeys' capabilities. \fIUnset\fP this
-if you want to play interesting key selection games.
-(PGP only)
-
-
-.TP
-.B pgp_import_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to import a key from a message into
-the user's public key ring.
-.IP
-This is a format string, see the $pgp_decode_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(PGP only)
-
-
-.TP
-.B pgp_list_pubring_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to list the public key ring's contents. The
-output format must be analogous to the one used by
-
-.IP
-.EX
-gpg \-\-list\-keys \-\-with\-colons \-\-with\-fingerprint
-
-.EE
-.IP
-Note: gpg's \fCfixed\-list\-mode\fP option should not be used. It
-produces a different date format which may result in NeoMutt showing
-incorrect key generation dates.
-.IP
-This is a format string, see the $pgp_decode_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(PGP only)
-
-
-.TP
-.B pgp_list_secring_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to list the secret key ring's contents. The
-output format must be analogous to the one used by:
-
-.IP
-.EX
-gpg \-\-list\-keys \-\-with\-colons \-\-with\-fingerprint
-
-.EE
-.IP
-Note: gpg's \fCfixed\-list\-mode\fP option should not be used. It
-produces a different date format which may result in NeoMutt showing
-incorrect key generation dates.
-.IP
-This is a format string, see the $pgp_decode_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(PGP only)
-
-
-.TP
-.B pgp_long_ids
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP, use 64 bit PGP key IDs, if \fIunset\fP use the normal 32 bit key IDs.
-NOTE: Internally, NeoMutt has transitioned to using fingerprints (or long key IDs
-as a fallback). This option now only controls the display of key IDs
-in the key selection menu and a few other places.
-(PGP only)
-
-
-.TP
-.B pgp_mime_auto
-.nf
-Type: quadoption
-Default: ask\-yes
-.fi
-.IP
-This option controls whether NeoMutt will prompt you for
-automatically sending a (signed/encrypted) message using
-PGP/MIME when inline (traditional) fails (for any reason).
-.IP
-Also note that using the old\-style PGP message format is \fBstrongly\fP
-\fBdeprecated\fP.
-(PGP only)
-
-
-.TP
-.B pgp_replyinline
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Setting this variable will cause NeoMutt to always attempt to
-create an inline (traditional) message when replying to a
-message which is PGP encrypted/signed inline. This can be
-overridden by use of the pgp menu, when inline is not
-required. This option does not automatically detect if the
-(replied\-to) message is inline; instead it relies on NeoMutt
-internals for previously checked/flagged messages.
-.IP
-Note that NeoMutt might automatically use PGP/MIME for messages
-which consist of more than a single MIME part. NeoMutt can be
-configured to ask before sending PGP/MIME messages when inline
-(traditional) would not work.
-.IP
-Also see the $pgp_mime_auto variable.
-.IP
-Also note that using the old\-style PGP message format is \fBstrongly\fP
-\fBdeprecated\fP.
-(PGP only)
-
-
-.TP
-.B pgp_retainable_sigs
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, signed and encrypted messages will consist of nested
-\fCmultipart/signed\fP and \fCmultipart/encrypted\fP body parts.
-.IP
-This is useful for applications like encrypted and signed mailing
-lists, where the outer layer (\fCmultipart/encrypted\fP) can be easily
-removed, while the inner \fCmultipart/signed\fP part is retained.
-(PGP only)
-
-
-.TP
-.B pgp_self_encrypt
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, PGP encrypted messages will also be encrypted
-using the key in $pgp_default_key.
-(PGP only)
-
-
-.TP
-.B pgp_show_unusable
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP, NeoMutt will display non\-usable keys on the PGP key selection
-menu. This includes keys which have been revoked, have expired, or
-have been marked as "disabled" by the user.
-(PGP only)
-
-
-.TP
-.B pgp_sign_as
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-If you have a different key pair to use for signing, you should
-set this to the signing key. Most people will only need to set
-$pgp_default_key. It is recommended that you use the keyid form
-to specify your key (e.g. \fC0x00112233\fP).
-(PGP only)
-
-
-.TP
-.B pgp_sign_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to create the detached PGP signature for a
-\fCmultipart/signed\fP PGP/MIME body part.
-.IP
-This is a format string, see the $pgp_decode_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(PGP only)
-
-
-.TP
-.B pgp_sort_keys
-.nf
-Type: sort order
-Default: address
-.fi
-.IP
-Specifies how the entries in the pgp menu are sorted. The
-following are legal values:
-.RS
-.PD 0
-.TP
-address
-sort alphabetically by user id
-.TP
-keyid
-sort alphabetically by key id
-.TP
-date
-sort by key creation date
-.TP
-trust
-sort by the trust of the key
-.RE
-.PD 1
-.IP
-If you prefer reverse order of the above values, prefix it with
-"reverse\-".
-(PGP only)
-
-
-.TP
-.B pgp_strict_enc
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP, NeoMutt will automatically encode PGP/MIME signed messages as
-quoted\-printable. Please note that unsetting this variable may
-lead to problems with non\-verifyable PGP signatures, so only change
-this if you know what you are doing.
-(PGP only)
-
-
-.TP
-.B pgp_timeout
-.nf
-Type: number (long)
-Default: 300
-.fi
-.IP
-The number of seconds after which a cached passphrase will expire if
-not used.
-(PGP only)
-
-
-.TP
-.B pgp_use_gpg_agent
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP, NeoMutt expects a \fCgpg\-agent(1)\fP process will handle
-private key passphrase prompts. If \fIunset\fP, NeoMutt will prompt
-for the passphrase and pass it via stdin to the pgp command.
-.IP
-Note that as of version 2.1, GnuPG automatically spawns an agent
-and requires the agent be used for passphrase management. Since
-that version is increasingly prevalent, this variable now
-defaults \fIset\fP.
-.IP
-NeoMutt works with a GUI or curses pinentry program. A TTY pinentry
-should not be used.
-.IP
-If you are using an older version of GnuPG without an agent running,
-or another encryption program without an agent, you will need to
-\fIunset\fP this variable.
-(PGP only)
-
-
-.TP
-.B pgp_verify_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to verify PGP signatures.
-.IP
-This is a format string, see the $pgp_decode_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(PGP only)
-
-
-.TP
-.B pgp_verify_key_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to verify key information from the key selection
-menu.
-.IP
-This is a format string, see the $pgp_decode_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(PGP only)
-
-
-.TP
-.B pipe_decode
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Used in connection with the \fC<pipe\-message>\fP function. When \fIunset\fP,
-NeoMutt will pipe the messages without any preprocessing. When \fIset\fP, NeoMutt
-will attempt to decode the messages first.
-.IP
-Also see $pipe_decode_weed, which controls whether headers will
-be weeded when this is \fIset\fP.
-
-
-.TP
-.B pipe_decode_weed
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-For \fC<pipe\-message>\fP, when $pipe_decode is set, this further
-controls whether NeoMutt will weed headers.
-
-
-.TP
-.B pipe_sep
-.nf
-Type: string
-Default: "\\n"
-.fi
-.IP
-The separator to add between messages when piping a list of tagged
-messages to an external Unix command.
-
-
-.TP
-.B pipe_split
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Used in connection with the \fC<pipe\-message>\fP function following
-\fC<tag\-prefix>\fP. If this variable is \fIunset\fP, when piping a list of
-tagged messages NeoMutt will concatenate the messages and will pipe them
-all concatenated. When \fIset\fP, NeoMutt will pipe the messages one by one.
-In both cases the messages are piped in the current sorted order,
-and the $pipe_sep separator is added after each message.
-
-
-.TP
-.B pop_auth_try_all
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP, NeoMutt will try all available authentication methods.
-When \fIunset\fP, NeoMutt will only fall back to other authentication
-methods if the previous methods are unavailable. If a method is
-available but authentication fails, NeoMutt will not connect to the POP server.
-
-
-.TP
-.B pop_authenticators
-.nf
-Type: string list
-Default: ""
-.fi
-.IP
-This is a colon\-delimited list of authentication methods NeoMutt may
-attempt to use to log in to an POP server, in the order NeoMutt should
-try them. Authentication methods are either "user", "apop" or any
-SASL mechanism, e.g. "digest\-md5", "gssapi" or "cram\-md5".
-This option is case\-insensitive. If this option is \fIunset\fP
-(the default) NeoMutt will try all available methods, in order from
-most\-secure to least\-secure.
-.IP
-Example:
-
-.IP
-.EX
-set pop_authenticators="digest\-md5:apop:user"
-
-.EE
-
-
-.TP
-.B pop_checkinterval
-.nf
-Type: number
-Default: 60
-.fi
-.IP
-This variable configures how often (in seconds) NeoMutt should look for
-new mail in the currently selected mailbox if it is a POP mailbox.
-
-
-.TP
-.B pop_delete
-.nf
-Type: quadoption
-Default: ask\-no
-.fi
-.IP
-If \fIset\fP, NeoMutt will delete successfully downloaded messages from the POP
-server when using the \fC<fetch-mail>\fP function. When \fIunset\fP, NeoMutt will
-download messages but also leave them on the POP server.
-
-
-.TP
-.B pop_host
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-The name of your POP server for the \fC<fetch-mail>\fP function. You
-can also specify an alternative port, username and password, i.e.:
-
-.IP
-.EX
-[pop[s]://][username[:password]@]popserver[:port]
-
-.EE
-.IP
-where "[...]" denotes an optional part.
-
-
-.TP
-.B pop_last
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If this variable is \fIset\fP, NeoMutt will try to use the "\fCLAST\fP" POP command
-for retrieving only unread messages from the POP server when using
-the \fC<fetch-mail>\fP function.
-
-
-.TP
-.B pop_oauth_refresh_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-The command to run to generate an OAUTH refresh token for
-authorizing your connection to your POP server. This command will be
-run on every connection attempt that uses the OAUTHBEARER authentication
-mechanism. See "oauth" for details.
-
-
-.TP
-.B pop_pass
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-Specifies the password for your POP account. If \fIunset\fP, NeoMutt will
-prompt you for your password when you open a POP mailbox.
-.IP
-\fBWarning\fP: you should only use this option when you are on a
-fairly secure machine, because the superuser can read your neomuttrc
-even if you are the only one who can read the file.
-
-
-.TP
-.B pop_reconnect
-.nf
-Type: quadoption
-Default: ask\-yes
-.fi
-.IP
-Controls whether or not NeoMutt will try to reconnect to the POP server if
-the connection is lost.
-
-
-.TP
-.B pop_user
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-Your login name on the POP server.
-.IP
-This variable defaults to your user name on the local machine.
-
-
-.TP
-.B post_indent_string
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-Similar to the $attribution variable, NeoMutt will append this
-string after the inclusion of a message which is being replied to.
-
-
-.TP
-.B post_moderated
-.nf
-Type: quadoption
-Default: ask\-yes
-.fi
-.IP
-If set to \fIyes\fP, NeoMutt will post article to newsgroup that have
-not permissions to posting (e.g. moderated). \fBNote:\fP if news server
-does not support posting to that newsgroup or totally read\-only, that
-posting will not have an effect.
-
-
-.TP
-.B postpone
-.nf
-Type: quadoption
-Default: ask\-yes
-.fi
-.IP
-Controls whether or not messages are saved in the $postponed
-mailbox when you elect not to send immediately. If set to
-\fIask\-yes\fP or \fIask\-no\fP, you will be prompted with "Save
-(postpone) draft message?" when quitting from the "compose"
-screen.
-.IP
-Also see the $recall variable.
-
-
-.TP
-.B postpone_encrypt
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, postponed messages that are marked for encryption will be
-self\-encrypted. NeoMutt will first try to encrypt using the value specified
-in $pgp_default_key or $smime_default_key. If those are not
-set, it will try the deprecated $postpone_encrypt_as.
-(Crypto only)
-
-
-.TP
-.B postpone_encrypt_as
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-This is a deprecated fall\-back variable for $postpone_encrypt.
-Please use $pgp_default_key or $smime_default_key.
-(Crypto only)
-
-
-.TP
-.B postponed
-.nf
-Type: mailbox
-Default: "~/postponed"
-.fi
-.IP
-NeoMutt allows you to indefinitely "postpone sending a message" which
-you are editing. When you choose to postpone a message, NeoMutt saves it
-in the mailbox specified by this variable.
-.IP
-Also see the $postpone variable.
-
-
-.TP
-.B preconnect
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-If \fIset\fP, a shell command to be executed if NeoMutt fails to establish
-a connection to the server. This is useful for setting up secure
-connections, e.g. with \fCssh(1)\fP. If the command returns a nonzero
-status, NeoMutt gives up opening the server. Example:
-
-.IP
-.EX
-set preconnect="ssh \-f \-q \-L 1234:mailhost.net:143 mailhost.net \\
-sleep 20 < /dev/null > /dev/null"
-
-.EE
-.IP
-Mailbox "foo" on "mailhost.net" can now be reached
-as "{localhost:1234}foo".
-.IP
-Note: For this example to work, you must be able to log in to the
-remote machine without having to enter a password.
-
-
-.TP
-.B preferred_languages
-.nf
-Type: string list
-Default: ""
-.fi
-.IP
-RFC8255 : user preferred languages to be search in parts and display
-Ex. : set preferred_languages="en,fr,de"
-
-
-.TP
-.B print
-.nf
-Type: quadoption
-Default: ask\-no
-.fi
-.IP
-Controls whether or not NeoMutt really prints messages.
-This is set to "ask\-no" by default, because some people
-accidentally hit "p" often.
-
-
-.TP
-.B print_command
-.nf
-Type: command
-Default: "lpr"
-.fi
-.IP
-This specifies the command pipe that should be used to print messages.
-
-
-.TP
-.B print_decode
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-Used in connection with the \fC<print\-message>\fP function. If this
-option is \fIset\fP, the message is decoded before it is passed to the
-external command specified by $print_command. If this option
-is \fIunset\fP, no processing will be applied to the message when
-printing it. The latter setting may be useful if you are using
-some advanced printer filter which is able to properly format
-e\-mail messages for printing.
-.IP
-Also see $print_decode_weed, which controls whether headers will
-be weeded when this is \fIset\fP.
-
-
-.TP
-.B print_decode_weed
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-For \fC<print\-message>\fP, when $print_decode is set, this
-further controls whether NeoMutt will weed headers.
-
-
-.TP
-.B print_split
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Used in connection with the \fC<print\-message>\fP function. If this option
-is \fIset\fP, the command specified by $print_command is executed once for
-each message which is to be printed. If this option is \fIunset\fP,
-the command specified by $print_command is executed only once, and
-all the messages are concatenated, with a form feed as the message
-separator.
-.IP
-Those who use the \fCenscript\fP(1) program's mail\-printing mode will
-most likely want to \fIset\fP this option.
-
-
-.TP
-.B prompt_after
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If you use an \fIexternal\fP $pager, setting this variable will
-cause NeoMutt to prompt you for a command when the pager exits rather
-than returning to the index menu. If \fIunset\fP, NeoMutt will return to the
-index menu when the external pager exits.
-
-
-.TP
-.B query_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This specifies the command NeoMutt will use to make external address
-queries. The string may contain a "%s", which will be substituted
-with the query string the user types. NeoMutt will add quotes around the
-string substituted for "%s" automatically according to shell quoting
-rules, so you should avoid adding your own. If no "%s" is found in
-the string, NeoMutt will append the user's query to the end of the string.
-See "query" for more information.
-
-
-.TP
-.B query_format
-.nf
-Type: string
-Default: "%3c %t %\-25.25n %\-25.25a | %e"
-.fi
-.IP
-This variable describes the format of the "query" menu. The
-following \fCprintf(3)\fP\-style sequences are understood:
-.RS
-.PD 0
-.TP
-%a
-
-Destination address
-.TP
-%c
-
-Current entry number
-.TP
-%e
-*
-Extra information
-.TP
-%n
-
-Destination name
-.TP
-%t
-
-"*" if current entry is tagged, a space otherwise
-.TP
-%>X
-
-Right justify the rest of the string and pad with "X"
-.TP
-%|X
-
-Pad to the end of the line with "X"
-.TP
-%*X
-
-Soft\-fill with character "X" as pad
-.RE
-.PD 1
-.IP
-For an explanation of "soft\-fill", see the $index_format documentation.
-.IP
-* = can be optionally printed if nonzero, see the $status_format documentation.
-
-
-.TP
-.B quit
-.nf
-Type: quadoption
-Default: yes
-.fi
-.IP
-This variable controls whether "quit" and "exit" actually quit
-from NeoMutt. If this option is \fIset\fP, they do quit, if it is \fIunset\fP, they
-have no effect, and if it is set to \fIask\-yes\fP or \fIask\-no\fP, you are
-prompted for confirmation when you try to quit.
-
-
-.TP
-.B quote_regex
-.nf
-Type: regular expression
-Default: "^([ \\t]*[|>:}#])+"
-.fi
-.IP
-A regular expression used in the internal pager to determine quoted
-sections of text in the body of a message. Quoted text may be filtered
-out using the \fC<toggle\-quoted>\fP command, or colored according to the
-"color quoted" family of directives.
-.IP
-Higher levels of quoting may be colored differently ("color quoted1",
-"color quoted2", etc.). The quoting level is determined by removing
-the last character from the matched text and recursively reapplying
-the regular expression until it fails to produce a match.
-.IP
-Match detection may be overridden by the $smileys regular expression.
-
-
-.TP
-.B read_inc
-.nf
-Type: number
-Default: 10
-.fi
-.IP
-If set to a value greater than 0, NeoMutt will display which message it
-is currently on when reading a mailbox or when performing search actions
-such as search and limit. The message is printed after
-this many messages have been read or searched (e.g., if set to 25, NeoMutt will
-print a message when it is at message 25, and then again when it gets
-to message 50). This variable is meant to indicate progress when
-reading or searching large mailboxes which may take some time.
-When set to 0, only a single message will appear before the reading
-the mailbox.
-.IP
-Also see the $write_inc, $net_inc and $time_inc variables and the
-"tuning" section of the manual for performance considerations.
-
-
-.TP
-.B read_only
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, all folders are opened in read\-only mode.
-
-
-.TP
-.B realname
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-This variable specifies what "real" or "personal" name should be used
-when sending messages.
-.IP
-If not specified, then the user's "real name" will be read from \fC/etc/passwd\fP.
-This option will not be used, if "$from" is set.
-
-
-.TP
-.B recall
-.nf
-Type: quadoption
-Default: ask\-yes
-.fi
-.IP
-Controls whether or not NeoMutt recalls postponed messages
-when composing a new message.
-.IP
-Setting this variable to \fIyes\fP is not generally useful, and thus not
-recommended. Note that the \fC<recall\-message>\fP function can be used
-to manually recall postponed messages.
-.IP
-Also see $postponed variable.
-
-
-.TP
-.B record
-.nf
-Type: mailbox
-Default: "~/sent"
-.fi
-.IP
-This specifies the file into which your outgoing messages should be
-appended. (This is meant as the primary method for saving a copy of
-your messages, but another way to do this is using the "my_hdr"
-command to create a "Bcc:" field with your email address in it.)
-.IP
-The value of \fI$record\fP is overridden by the $force_name and
-$save_name variables, and the "fcc-hook" command. Also see $copy
-and $write_bcc.
-
-
-.TP
-.B reflow_space_quotes
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-This option controls how quotes from format=flowed messages are displayed
-in the pager and when replying (with $text_flowed \fIunset\fP).
-When set, this option adds spaces after each level of quote marks, turning
-">>>foo" into "> > > foo".
-.IP
-\fBNote:\fP If $reflow_text is \fIunset\fP, this option has no effect.
-Also, this option does not affect replies when $text_flowed is \fIset\fP.
-
-
-.TP
-.B reflow_text
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will reformat paragraphs in text/plain
-parts marked format=flowed. If \fIunset\fP, NeoMutt will display paragraphs
-unaltered from how they appear in the message body. See RFC3676 for
-details on the \fIformat=flowed\fP format.
-.IP
-Also see $reflow_wrap, and $wrap.
-
-
-.TP
-.B reflow_wrap
-.nf
-Type: number
-Default: 78
-.fi
-.IP
-This variable controls the maximum paragraph width when reformatting text/plain
-parts when $reflow_text is \fIset\fP. When the value is 0, paragraphs will
-be wrapped at the terminal's right margin. A positive value sets the
-paragraph width relative to the left margin. A negative value set the
-paragraph width relative to the right margin.
-.IP
-Also see $wrap.
-
-
-.TP
-.B reply_regex
-.nf
-Type: regular expression
-Default: "^((re|aw|sv)(\\[[0\-9]+\\])*:[ \\t]*)*"
-.fi
-.IP
-A regular expression used to recognize reply messages when threading
-and replying. The default value corresponds to the English "Re:", the
-German "Aw:" and the Swedish "Sv:".
-
-
-.TP
-.B reply_self
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIunset\fP and you are replying to a message sent by you, NeoMutt will
-assume that you want to reply to the recipients of that message rather
-than to yourself.
-.IP
-Also see the "alternates" command.
-
-
-.TP
-.B reply_to
-.nf
-Type: quadoption
-Default: ask\-yes
-.fi
-.IP
-If \fIset\fP, when replying to a message, NeoMutt will use the address listed
-in the Reply\-to: header as the recipient of the reply. If \fIunset\fP,
-it will use the address in the From: header field instead. This
-option is useful for reading a mailing list that sets the Reply\-To:
-header field to the list address and you want to send a private
-message to the author of a message.
-
-
-.TP
-.B reply_with_xorig
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-This variable provides a toggle. When active, the From: header will be
-extracted from the current mail's 'X\-Original\-To:' header. This setting
-does not have precedence over "reverse_realname".
-.IP
-Assuming 'fast_reply' is disabled, this option will prompt the user with a
-prefilled From: header.
-
-
-.TP
-.B resolve
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, the cursor will be automatically advanced to the next
-(possibly undeleted) message whenever a command that modifies the
-current message is executed.
-
-
-.TP
-.B resume_draft_files
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, draft files (specified by \fC\-H\fP on the command
-line) are processed similarly to when resuming a postponed
-message. Recipients are not prompted for; send\-hooks are not
-evaluated; no alias expansion takes place; user\-defined headers
-and signatures are not added to the message.
-
-
-.TP
-.B resume_edited_draft_files
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP, draft files previously edited (via \fC\-E \-H\fP on
-the command line) will have $resume_draft_files automatically
-set when they are used as a draft file again.
-.IP
-The first time a draft file is saved, NeoMutt will add a header,
-X\-Mutt\-Resume\-Draft to the saved file. The next time the draft
-file is read in, if NeoMutt sees the header, it will set
-$resume_draft_files.
-.IP
-This option is designed to prevent multiple signatures,
-user\-defined headers, and other processing effects from being
-made multiple times to the draft file.
-
-
-.TP
-.B reverse_alias
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-This variable controls whether or not NeoMutt will display the "personal"
-name from your aliases in the index menu if it finds an alias that
-matches the message's sender. For example, if you have the following
-alias:
-
-.IP
-.EX
-alias juser abd30425@somewhere.net (Joe User)
-
-.EE
-.IP
-and then you receive mail which contains the following header:
-
-.IP
-.EX
-From: abd30425@somewhere.net
-
-.EE
-.IP
-It would be displayed in the index menu as "Joe User" instead of
-"abd30425@somewhere.net." This is useful when the person's e\-mail
-address is not human friendly.
-
-
-.TP
-.B reverse_name
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-It may sometimes arrive that you receive mail to a certain machine,
-move the messages to another machine, and reply to some the messages
-from there. If this variable is \fIset\fP, the default \fIFrom:\fP line of
-the reply messages is built using the address where you received the
-messages you are replying to \fBif\fP that address matches your
-"alternates". If the variable is \fIunset\fP, or the address that would be
-used doesn't match your "alternates", the \fIFrom:\fP line will use
-your address on the current machine.
-.IP
-Also see the "alternates" command and $reverse_realname.
-
-
-.TP
-.B reverse_realname
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-This variable fine\-tunes the behavior of the $reverse_name feature.
-.IP
-When it is \fIunset\fP, NeoMutt will remove the real name part of a
-matching address. This allows the use of the email address
-without having to also use what the sender put in the real name
-field.
-.IP
-When it is \fIset\fP, NeoMutt will use the matching address as\-is.
-.IP
-In either case, a missing real name will be filled in afterwards
-using the value of $realname.
-
-
-.TP
-.B rfc2047_parameters
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When this variable is \fIset\fP, NeoMutt will decode RFC2047\-encoded MIME
-parameters. You want to set this variable when NeoMutt suggests you
-to save attachments to files named like:
-
-.IP
-.EX
-=?iso\-8859\-1?Q?file=5F=E4=5F991116=2Ezip?=
-=?utf\-8?Q?z=C4=99ta.png?=
-
-.EE
-.IP
-When this variable is \fIset\fP interactively, the change won't be
-active until you change folders.
-.IP
-Note that this use of RFC2047's encoding is explicitly
-prohibited by the standard, but nevertheless encountered in the
-wild and produced by, e.g., Outlook.
-.IP
-Also note that setting this parameter will \fInot\fP have the effect
-that NeoMutt \fIgenerates\fP this kind of encoding. Instead, NeoMutt will
-unconditionally use the encoding specified in RFC2231.
-
-
-.TP
-.B save_address
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, NeoMutt will take the sender's full address when choosing a
-default folder for saving a mail. If $save_name or $force_name
-is \fIset\fP too, the selection of the Fcc folder will be changed as well.
-
-
-.TP
-.B save_empty
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIunset\fP, mailboxes which contain no saved messages will be removed
-when closed (the exception is $spoolfile which is never removed).
-If \fIset\fP, mailboxes are never removed.
-.IP
-\fBNote:\fP This only applies to mbox and MMDF folders, NeoMutt does not
-delete MH and Maildir directories.
-
-
-.TP
-.B save_history
-.nf
-Type: number
-Default: 0
-.fi
-.IP
-This variable controls the size of the history (per category) saved in the
-$history_file file.
-
-
-.TP
-.B save_name
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-This variable controls how copies of outgoing messages are saved.
-When \fIset\fP, a check is made to see if a mailbox specified by the
-recipient address exists (this is done by searching for a mailbox in
-the $folder directory with the \fIusername\fP part of the
-recipient address). If the mailbox exists, the outgoing message will
-be saved to that mailbox, otherwise the message is saved to the
-$record mailbox.
-.IP
-Also see the $force_name variable.
-
-
-.TP
-.B save_unsubscribed
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, info about unsubscribed newsgroups will be saved into
-"newsrc" file and into cache.
-
-
-.TP
-.B score
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When this variable is \fIunset\fP, scoring is turned off. This can
-be useful to selectively disable scoring for certain folders when the
-$score_threshold_delete variable and related are used.
-
-
-.TP
-.B score_threshold_delete
-.nf
-Type: number
-Default: \-1
-.fi
-.IP
-Messages which have been assigned a score equal to or lower than the value
-of this variable are automatically marked for deletion by NeoMutt. Since
-NeoMutt scores are always greater than or equal to zero, the default setting
-of this variable will never mark a message for deletion.
-
-
-.TP
-.B score_threshold_flag
-.nf
-Type: number
-Default: 9999
-.fi
-.IP
-Messages which have been assigned a score greater than or equal to this
-variable's value are automatically marked "flagged".
-
-
-.TP
-.B score_threshold_read
-.nf
-Type: number
-Default: \-1
-.fi
-.IP
-Messages which have been assigned a score equal to or lower than the value
-of this variable are automatically marked as read by NeoMutt. Since
-NeoMutt scores are always greater than or equal to zero, the default setting
-of this variable will never mark a message read.
-
-
-.TP
-.B search_context
-.nf
-Type: number
-Default: 0
-.fi
-.IP
-For the pager, this variable specifies the number of lines shown
-before search results. By default, search results will be top\-aligned.
-
-
-.TP
-.B send_charset
-.nf
-Type: string
-Default: "us\-ascii:iso\-8859\-1:utf\-8"
-.fi
-.IP
-A colon\-delimited list of character sets for outgoing messages. NeoMutt will use the
-first character set into which the text can be converted exactly.
-If your $charset is not "iso\-8859\-1" and recipients may not
-understand "UTF\-8", it is advisable to include in the list an
-appropriate widely used standard character set (such as
-"iso\-8859\-2", "koi8\-r" or "iso\-2022\-jp") either instead of or after
-"iso\-8859\-1".
-.IP
-In case the text can't be converted into one of these exactly,
-NeoMutt uses $charset as a fallback.
-
-
-.TP
-.B sendmail
-.nf
-Type: command
-Default: "/usr/sbin/sendmail \-oem \-oi"
-.fi
-.IP
-Specifies the program and arguments used to deliver mail sent by NeoMutt.
-NeoMutt expects that the specified program interprets additional
-arguments as recipient addresses. NeoMutt appends all recipients after
-adding a \fC\-\-\fP delimiter (if not already present). Additional
-flags, such as for $use_8bitmime, $use_envelope_from,
-$dsn_notify, or $dsn_return will be added before the delimiter.
-.IP
-\fBSee also:\fP $write_bcc.
-
-
-.TP
-.B sendmail_wait
-.nf
-Type: number
-Default: 0
-.fi
-.IP
-Specifies the number of seconds to wait for the $sendmail process
-to finish before giving up and putting delivery in the background.
-.IP
-NeoMutt interprets the value of this variable as follows:
-.RS
-.PD 0
-.TP
->0
-number of seconds to wait for sendmail to finish before continuing
-.TP
-0
-wait forever for sendmail to finish
-.TP
-<0
-always put sendmail in the background without waiting
-.RE
-.PD 1
-.IP
-Note that if you specify a value other than 0, the output of the child
-process will be put in a temporary file. If there is some error, you
-will be informed as to where to find the output.
-
-
-.TP
-.B shell
-.nf
-Type: command
-Default: "/bin/sh"
-.fi
-.IP
-Command to use when spawning a subshell.
-If not specified, then the user's login shell from \fC/etc/passwd\fP is used.
-
-
-.TP
-.B show_multipart_alternative
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-When \fIset\fP to \fCinfo\fP, the multipart/alternative information is shown.
-When \fIset\fP to \fCinline\fP, all of the alternatives are displayed.
-When not set, the default behavior is to show only the chosen alternative.
-
-
-.TP
-.B show_new_news
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP, news server will be asked for new newsgroups on entering
-the browser. Otherwise, it will be done only once for a news server.
-Also controls whether or not number of new articles of subscribed
-newsgroups will be then checked.
-
-
-.TP
-.B show_only_unread
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, only subscribed newsgroups that contain unread articles
-will be displayed in browser.
-
-
-.TP
-.B sidebar_component_depth
-.nf
-Type: number
-Default: 0
-.fi
-.IP
-By default the sidebar will show the mailbox's path, relative to the
-$folder variable. This specifies the number of parent directories to hide
-from display in the sidebar. For example: If a maildir is normally
-displayed in the sidebar as dir1/dir2/dir3/maildir, setting
-\fCsidebar_component_depth=2\fP will display it as dir3/maildir, having
-truncated the 2 highest directories.
-.IP
-\fBSee also:\fP $sidebar_short_path
-
-
-.TP
-.B sidebar_delim_chars
-.nf
-Type: string
-Default: "/."
-.fi
-.IP
-This contains the list of characters which you would like to treat
-as folder separators for displaying paths in the sidebar.
-.IP
-Local mail is often arranged in directories: 'dir1/dir2/mailbox'.
-
-.IP
-.EX
-set sidebar_delim_chars='/'
-
-.EE
-.IP
-IMAP mailboxes are often named: 'folder1.folder2.mailbox'.
-
-.IP
-.EX
-set sidebar_delim_chars='.'
-
-.EE
-.IP
-\fBSee also:\fP $sidebar_short_path, $sidebar_folder_indent, $sidebar_indent_string.
-
-
-.TP
-.B sidebar_divider_char
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-This specifies the characters to be drawn between the sidebar (when
-visible) and the other NeoMutt panels. ASCII and Unicode line\-drawing
-characters are supported.
-
-
-.TP
-.B sidebar_folder_indent
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Set this to indent mailboxes in the sidebar.
-.IP
-\fBSee also:\fP $sidebar_short_path, $sidebar_indent_string, $sidebar_delim_chars.
-
-
-.TP
-.B sidebar_format
-.nf
-Type: string
-Default: "%D%* %n"
-.fi
-.IP
-This variable allows you to customize the sidebar display. This string is
-similar to $index_format, but has its own set of \fCprintf(3)\fP\-like
-sequences:
-.RS
-.PD 0
-.TP
-%B
-
-Name of the mailbox
-.TP
-%d
-* @
-Number of deleted messages in the mailbox
-.TP
-%D
-
-Descriptive name of the mailbox
-.TP
-%F
-*
-Number of flagged messages in the mailbox
-.TP
-%L
-* @
-Number of messages after limiting
-.TP
-%n
-
-'N' if mailbox has new mail, ' ' (space) otherwise
-.TP
-%N
-*
-Number of unread messages in the mailbox (seen or unseen)
-.TP
-%o
-*
-Number of old messages in the mailbox (unread, seen)
-.TP
-%r
-*
-Number of read messages in the mailbox (read, seen)
-.TP
-%S
-*
-Size of mailbox (total number of messages)
-.TP
-%t
-* @
-Number of tagged messages in the mailbox
-.TP
-%Z
-*
-Number of new messages in the mailbox (unread, unseen)
-.TP
-%!
-
-"!" : one flagged message;
-"!!" : two flagged messages;
-"n!" : n flagged messages (for n > 2).
-Otherwise prints nothing.
-.TP
-%>X
-
-Right justify the rest of the string and pad with "X"
-.TP
-%|X
-
-Pad to the end of the line with "X"
-.TP
-%*X
-
-Soft\-fill with character "X" as pad
-.RE
-.PD 1
-.IP
-* = Can be optionally printed if nonzero
-.IP
-@ = Only applicable to the current folder
-.IP
-In order to use %S, %N, %F, and %!, $mail_check_stats must
-be \fIset\fP. When thus set, a suggested value for this option is
-"%B%?F? [%F]?%* %?N?%N/?%S".
-
-
-.TP
-.B sidebar_indent_string
-.nf
-Type: string
-Default: " "
-.fi
-.IP
-This specifies the string that is used to indent mailboxes in the sidebar.
-It defaults to two spaces.
-.IP
-\fBSee also:\fP $sidebar_short_path, $sidebar_folder_indent, $sidebar_delim_chars.
-
-
-.TP
-.B sidebar_new_mail_only
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When set, the sidebar will only display mailboxes containing new, or
-flagged, mail.
-.IP
-\fBSee also:\fP $sidebar_whitelist, $sidebar_non_empty_mailbox_only.
-
-
-.TP
-.B sidebar_next_new_wrap
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When set, the \fC<sidebar\-next\-new>\fP command will not stop and the end of
-the list of mailboxes, but wrap around to the beginning. The
-\fC<sidebar\-prev\-new>\fP command is similarly affected, wrapping around to
-the end of the list.
-
-
-.TP
-.B sidebar_non_empty_mailbox_only
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When set, the sidebar will only display mailboxes that contain one or more mails.
-.IP
-\fBSee also:\fP $sidebar_new_mail_only, $sidebar_whitelist.
-
-
-.TP
-.B sidebar_on_right
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When set, the sidebar will appear on the right\-hand side of the screen.
-
-
-.TP
-.B sidebar_short_path
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-By default the sidebar will show the mailbox's path, relative to the
-$folder variable. Setting \fCsidebar_shortpath=yes\fP will shorten the
-names relative to the previous name. Here's an example:
-.RS
-.PD 0
-.TP
-\fBshortpath=no\fP
-\fBshortpath=yes\fP
-\fBshortpath=yes, folderindent=yes, indentstr=".."\fP
-.TP
-\fCfruit\fP
-\fCfruit\fP
-\fCfruit\fP
-.TP
-\fCfruit.apple\fP
-\fCapple\fP
-\fC..apple\fP
-.TP
-\fCfruit.banana\fP
-\fCbanana\fP
-\fC..banana\fP
-.TP
-\fCfruit.cherry\fP
-\fCcherry\fP
-\fC..cherry\fP
-.RE
-.PD 1
-.IP
-\fBSee also:\fP $sidebar_delim_chars, $sidebar_folder_indent,
-$sidebar_indent_string, $sidebar_component_depth.
-
-
-.TP
-.B sidebar_sort_method
-.nf
-Type: sort order
-Default: order
-.fi
-.IP
-Specifies how to sort mailbox entries in the sidebar. By default, the
-entries are sorted alphabetically. Valid values:
-.RS
-.PD 0
-.TP
-\(hy path (alphabetically)
-.TP
-\(hy count (all message count)
-.TP
-\(hy flagged (flagged message count)
-.TP
-\(hy new (unread message count)
-.TP
-\(hy unread (unread message count)
-.TP
-\(hy unsorted
-.RE
-.PD 1
-.IP
-You may optionally use the "reverse\-" prefix to specify reverse sorting
-order (example: "\fCset sidebar_sort_method=reverse\-alpha\fP").
-.IP
-The "alpha" and "name" values are synonyms for "path".
-
-
-.TP
-.B sidebar_visible
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-This specifies whether or not to show sidebar. The sidebar shows a list of
-all your mailboxes.
-.IP
-\fBSee also:\fP $sidebar_format, $sidebar_width
-
-
-.TP
-.B sidebar_width
-.nf
-Type: number
-Default: 30
-.fi
-.IP
-This controls the width of the sidebar. It is measured in screen columns.
-For example: sidebar_width=20 could display 20 ASCII characters, or 10
-Chinese characters.
-
-
-.TP
-.B sig_dashes
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP, a line containing "\-\- " (note the trailing space) will be inserted before your
-$signature. It is \fBstrongly\fP recommended that you not \fIunset\fP
-this variable unless your signature contains just your name. The
-reason for this is because many software packages use "\-\- \\n" to
-detect your signature. For example, NeoMutt has the ability to highlight
-the signature in a different color in the built\-in pager.
-
-
-.TP
-.B sig_on_top
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, the signature will be included before any quoted or forwarded
-text. It is \fBstrongly\fP recommended that you do not set this variable
-unless you really know what you are doing, and are prepared to take
-some heat from netiquette guardians.
-
-
-.TP
-.B signature
-.nf
-Type: path
-Default: "~/.signature"
-.fi
-.IP
-Specifies the filename of your signature, which is appended to all
-outgoing messages. If the filename ends with a pipe ("|"), it is
-assumed that filename is a shell command and input should be read from
-its standard output.
-
-
-.TP
-.B simple_search
-.nf
-Type: string
-Default: "~f %s | ~s %s"
-.fi
-.IP
-Specifies how NeoMutt should expand a simple search into a real search
-pattern. A simple search is one that does not contain any of the "~" pattern
-operators. See "patterns" for more information on search patterns.
-.IP
-For example, if you simply type "joe" at a search or limit prompt, NeoMutt
-will automatically expand it to the value specified by this variable by
-replacing "%s" with the supplied string.
-For the default value, "joe" would be expanded to: "~f joe | ~s joe".
-
-
-.TP
-.B size_show_bytes
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, message sizes will display bytes for values less than
-1 kilobyte. See formatstrings-size.
-
-
-.TP
-.B size_show_fractions
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP, message sizes will be displayed with a single decimal value
-for sizes from 0 to 10 kilobytes and 1 to 10 megabytes.
-See formatstrings-size.
-
-
-.TP
-.B size_show_mb
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP, message sizes will display megabytes for values greater than
-or equal to 1 megabyte. See formatstrings-size.
-
-
-.TP
-.B size_units_on_left
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, message sizes units will be displayed to the left of the number.
-See formatstrings-size.
-
-
-.TP
-.B skip_quoted_offset
-.nf
-Type: number
-Default: 0
-.fi
-.IP
-Lines of quoted text that are displayed before the unquoted text after
-"skip to quoted" command (S)
-
-
-.TP
-.B sleep_time
-.nf
-Type: number
-Default: 1
-.fi
-.IP
-Specifies time, in seconds, to pause while displaying certain informational
-messages, while moving from folder to folder and after expunging
-messages from the current folder. The default is to pause one second, so
-a value of zero for this option suppresses the pause.
-
-
-.TP
-.B smart_wrap
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-Controls the display of lines longer than the screen width in the
-internal pager. If \fIset\fP, long lines are wrapped at a word boundary. If
-\fIunset\fP, lines are simply wrapped at the screen edge. Also see the
-$markers variable.
-
-
-.TP
-.B smileys
-.nf
-Type: regular expression
-Default: "(>From )|(:[\-^]?[][)(><}{|/DP])"
-.fi
-.IP
-The \fIpager\fP uses this variable to catch some common false
-positives of $quote_regex, most notably smileys and not consider
-a line quoted text if it also matches $smileys. This mostly
-happens at the beginning of a line.
-
-
-.TP
-.B smime_ask_cert_label
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-This flag controls whether you want to be asked to enter a label
-for a certificate about to be added to the database or not. It is
-\fIset\fP by default.
-(S/MIME only)
-
-
-.TP
-.B smime_ca_location
-.nf
-Type: path
-Default: ""
-.fi
-.IP
-This variable contains the name of either a directory, or a file which
-contains trusted certificates for use with OpenSSL.
-(S/MIME only)
-
-
-.TP
-.B smime_certificates
-.nf
-Type: path
-Default: ""
-.fi
-.IP
-Since for S/MIME there is no pubring/secring as with PGP, NeoMutt has to handle
-storage and retrieval of keys by itself. This is very basic right
-now, and keys and certificates are stored in two different
-directories, both named as the hash\-value retrieved from
-OpenSSL. There is an index file which contains mailbox\-address
-keyid pairs, and which can be manually edited. This option points to
-the location of the certificates.
-(S/MIME only)
-
-
-.TP
-.B smime_decrypt_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This format string specifies a command which is used to decrypt
-\fCapplication/x\-pkcs7\-mime\fP attachments.
-.IP
-The OpenSSL command formats have their own set of \fCprintf(3)\fP\-like sequences
-similar to PGP's:
-.RS
-.PD 0
-.TP
-%f
-Expands to the name of a file containing a message.
-.TP
-%s
-Expands to the name of a file containing the signature part
-of a \fCmultipart/signed\fP attachment when verifying it.
-.TP
-%k
-The key\-pair specified with $smime_default_key
-.TP
-%i
-Intermediate certificates
-.TP
-%c
-One or more certificate IDs.
-.TP
-%a
-The algorithm used for encryption.
-.TP
-%d
-The message digest algorithm specified with $smime_sign_digest_alg.
-.TP
-%C
-CA location: Depending on whether $smime_ca_location
-points to a directory or file, this expands to
-"\-CApath $smime_ca_location" or "\-CAfile $smime_ca_location".
-.RE
-.PD 1
-.IP
-For examples on how to configure these formats, see the \fCsmime.rc\fP in
-the \fCsamples/\fP subdirectory which has been installed on your system
-alongside the documentation.
-(S/MIME only)
-
-
-.TP
-.B smime_decrypt_use_default_key
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP (default) this tells NeoMutt to use the default key for decryption. Otherwise,
-if managing multiple certificate\-key\-pairs, NeoMutt will try to use the mailbox\-address
-to determine the key to use. It will ask you to supply a key, if it can't find one.
-(S/MIME only)
-
-
-.TP
-.B smime_default_key
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-This is the default key\-pair to use for S/MIME operations, and must be
-set to the keyid (the hash\-value that OpenSSL generates) to work properly.
-.IP
-It will be used for encryption (see $postpone_encrypt and
-$smime_self_encrypt).
-.IP
-It will be used for decryption unless $smime_decrypt_use_default_key
-is \fIunset\fP.
-.IP
-It will also be used for signing unless $smime_sign_as is set.
-.IP
-The (now deprecated) \fIsmime_self_encrypt_as\fP is an alias for this
-variable, and should no longer be used.
-(S/MIME only)
-
-
-.TP
-.B smime_encrypt_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to create encrypted S/MIME messages.
-.IP
-This is a format string, see the $smime_decrypt_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(S/MIME only)
-.IP
-Encrypt the message to $smime_default_key too.
-(S/MIME only)
-
-
-.TP
-.B smime_encrypt_with
-.nf
-Type: string
-Default: "aes256"
-.fi
-.IP
-This sets the algorithm that should be used for encryption.
-Valid choices are "aes128", "aes192", "aes256", "des", "des3", "rc2\-40", "rc2\-64", "rc2\-128".
-(S/MIME only)
-
-
-.TP
-.B smime_get_cert_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to extract X509 certificates from a PKCS7 structure.
-.IP
-This is a format string, see the $smime_decrypt_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(S/MIME only)
-
-
-.TP
-.B smime_get_cert_email_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to extract the mail address(es) used for storing
-X509 certificates, and for verification purposes (to check whether the
-certificate was issued for the sender's mailbox).
-.IP
-This is a format string, see the $smime_decrypt_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(S/MIME only)
-
-
-.TP
-.B smime_get_signer_cert_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to extract only the signers X509 certificate from a S/MIME
-signature, so that the certificate's owner may get compared to the
-email's "From:" field.
-.IP
-This is a format string, see the $smime_decrypt_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(S/MIME only)
-
-
-.TP
-.B smime_import_cert_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to import a certificate via smime_keys.
-.IP
-This is a format string, see the $smime_decrypt_command command for
-possible \fCprintf(3)\fP\-like sequences. NOTE: %c and %k will default
-to $smime_sign_as if set, otherwise $smime_default_key.
-(S/MIME only)
-
-
-.TP
-.B smime_is_default
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-The default behavior of NeoMutt is to use PGP on all auto\-sign/encryption
-operations. To override and to use OpenSSL instead this must be \fIset\fP.
-However, this has no effect while replying, since NeoMutt will automatically
-select the same application that was used to sign/encrypt the original
-message. (Note that this variable can be overridden by unsetting $crypt_autosmime.)
-(S/MIME only)
-
-
-.TP
-.B smime_keys
-.nf
-Type: path
-Default: ""
-.fi
-.IP
-Since for S/MIME there is no pubring/secring as with PGP, NeoMutt has to handle
-storage and retrieval of keys/certs by itself. This is very basic right now,
-and stores keys and certificates in two different directories, both
-named as the hash\-value retrieved from OpenSSL. There is an index file
-which contains mailbox\-address keyid pair, and which can be manually
-edited. This option points to the location of the private keys.
-(S/MIME only)
-
-
-.TP
-.B smime_pk7out_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to extract PKCS7 structures of S/MIME signatures,
-in order to extract the public X509 certificate(s).
-.IP
-This is a format string, see the $smime_decrypt_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(S/MIME only)
-
-
-.TP
-.B smime_self_encrypt
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, S/MIME encrypted messages will also be encrypted
-using the certificate in $smime_default_key.
-(S/MIME only)
-
-
-.TP
-.B smime_sign_as
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-If you have a separate key to use for signing, you should set this
-to the signing key. Most people will only need to set $smime_default_key.
-(S/MIME only)
-
-
-.TP
-.B smime_sign_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to created S/MIME signatures of type
-\fCmultipart/signed\fP, which can be read by all mail clients.
-.IP
-This is a format string, see the $smime_decrypt_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(S/MIME only)
-
-
-.TP
-.B smime_sign_digest_alg
-.nf
-Type: string
-Default: "sha256"
-.fi
-.IP
-This sets the algorithm that should be used for the signature message digest.
-Valid choices are "md5", "sha1", "sha224", "sha256", "sha384", "sha512".
-(S/MIME only)
-
-
-.TP
-.B smime_timeout
-.nf
-Type: number
-Default: 300
-.fi
-.IP
-The number of seconds after which a cached passphrase will expire if
-not used.
-(S/MIME only)
-
-
-.TP
-.B smime_verify_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to verify S/MIME signatures of type \fCmultipart/signed\fP.
-.IP
-This is a format string, see the $smime_decrypt_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(S/MIME only)
-
-
-.TP
-.B smime_verify_opaque_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-This command is used to verify S/MIME signatures of type
-\fCapplication/x\-pkcs7\-mime\fP.
-.IP
-This is a format string, see the $smime_decrypt_command command for
-possible \fCprintf(3)\fP\-like sequences.
-(S/MIME only)
-
-
-.TP
-.B smtp_authenticators
-.nf
-Type: string list
-Default: ""
-.fi
-.IP
-This is a colon\-delimited list of authentication methods NeoMutt may
-attempt to use to log in to an SMTP server, in the order NeoMutt should
-try them. Authentication methods are any SASL mechanism, e.g. "plain",
-"digest\-md5", "gssapi" or "cram\-md5".
-This option is case\-insensitive. If it is "unset"
-(the default) NeoMutt will try all available methods, in order from
-most\-secure to least\-secure. Support for the "plain" mechanism is
-bundled; other mechanisms are provided by an external SASL library (look
-for +USE_SASL in the output of neomutt \-v).
-.IP
-Example:
-
-.IP
-.EX
-set smtp_authenticators="digest\-md5:cram\-md5"
-
-.EE
-
-
-.TP
-.B smtp_oauth_refresh_command
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-The command to run to generate an OAUTH refresh token for
-authorizing your connection to your SMTP server. This command will be
-run on every connection attempt that uses the OAUTHBEARER authentication
-mechanism. See "oauth" for details.
-
-
-.TP
-.B smtp_pass
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-Specifies the password for your SMTP account. If \fIunset\fP, NeoMutt will
-prompt you for your password when you first send mail via SMTP.
-See $smtp_url to configure NeoMutt to send mail via SMTP.
-.IP
-\fBWarning\fP: you should only use this option when you are on a
-fairly secure machine, because the superuser can read your neomuttrc even
-if you are the only one who can read the file.
-
-
-.TP
-.B smtp_url
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-Defines the SMTP smarthost where sent messages should relayed for
-delivery. This should take the form of an SMTP URL, e.g.:
-
-.IP
-.EX
-smtp[s]://[user[:pass]@]host[:port]
-
-.EE
-.IP
-where "[...]" denotes an optional part.
-Setting this variable overrides the value of the $sendmail
-variable.
-.IP
-Also see $write_bcc.
-
-
-.TP
-.B smtp_user
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-The username for the SMTP server.
-.IP
-This variable defaults to your user name on the local machine.
-
-
-.TP
-.B sort
-.nf
-Type: sort order
-Default: date
-.fi
-.IP
-Specifies how to sort messages in the "index" menu. Valid values
-are:
-.RS
-.PD 0
-.TP
-\(hy date
-.TP
-\(hy date\-received
-.TP
-\(hy from
-.TP
-\(hy score
-.TP
-\(hy size
-.TP
-\(hy spam
-.TP
-\(hy subject
-.TP
-\(hy threads
-.TP
-\(hy to
-.TP
-\(hy unsorted
-.RE
-.PD 1
-.IP
-You may optionally use the "reverse\-" prefix to specify reverse sorting
-order.
-.IP
-The "date\-sent" value is a synonym for "date". The "mailbox\-order" value is
-a synonym for "unsorted".
-.IP
-Example:
-
-.IP
-.EX
-set sort=reverse\-date\-sent
-
-.EE
-
-
-.TP
-.B sort_alias
-.nf
-Type: sort order
-Default: alias
-.fi
-.IP
-Specifies how the entries in the "alias" menu are sorted. The
-following are legal values:
-.RS
-.PD 0
-.TP
-\(hy address (sort alphabetically by email address)
-.TP
-\(hy alias (sort alphabetically by alias name)
-.TP
-\(hy unsorted (leave in order specified in .neomuttrc)
-.RE
-.PD 1
-.IP
-Note: This also affects the entries of the address query menu, thus
-potentially overruling the order of entries as generated by $query_command.
-
-
-.TP
-.B sort_aux
-.nf
-Type: sort order
-Default: date
-.fi
-.IP
-This provides a secondary sort for messages in the "index" menu, used
-when the $sort value is equal for two messages.
-.IP
-When sorting by threads, this variable controls how threads are sorted
-in relation to other threads, and how the branches of the thread trees
-are sorted. This can be set to any value that $sort can, except
-"threads" (in that case, NeoMutt will just use "date"). You can also
-specify the "last\-" prefix in addition to the "reverse\-" prefix, but "last\-"
-must come after "reverse\-". The "last\-" prefix causes messages to be
-sorted against its siblings by which has the last descendant, using
-the rest of $sort_aux as an ordering. For instance,
-
-.IP
-.EX
-set sort_aux=last\-date\-received
-
-.EE
-.IP
-would mean that if a new message is received in a
-thread, that thread becomes the last one displayed (or the first, if
-you have "\fCset sort=reverse\-threads\fP".)
-.IP
-Note: For reversed\-threads $sort
-order, $sort_aux is reversed again (which is not the right thing to do,
-but kept to not break any existing configuration setting).
-
-
-.TP
-.B sort_browser
-.nf
-Type: sort order
-Default: alpha
-.fi
-.IP
-Specifies how to sort entries in the file browser. By default, the
-entries are sorted alphabetically. Valid values:
-.RS
-.PD 0
-.TP
-\(hy alpha (alphabetically)
-.TP
-\(hy count (all message count)
-.TP
-\(hy date
-.TP
-\(hy desc (description)
-.TP
-\(hy new (new message count)
-.TP
-\(hy size
-.TP
-\(hy unsorted
-.RE
-.PD 1
-.IP
-You may optionally use the "reverse\-" prefix to specify reverse sorting
-order (example: "\fCset sort_browser=reverse\-date\fP").
-.IP
-The "unread" value is a synonym for "new".
-
-
-.TP
-.B sort_re
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-This variable is only useful when sorting by threads with
-$strict_threads \fIunset\fP. In that case, it changes the heuristic
-mutt uses to thread messages by subject. With $sort_re \fIset\fP, mutt will
-only attach a message as the child of another message by subject if
-the subject of the child message starts with a substring matching the
-setting of $reply_regex. With $sort_re \fIunset\fP, mutt will attach
-the message whether or not this is the case, as long as the
-non\-$reply_regex parts of both messages are identical.
-
-
-.TP
-.B spam_separator
-.nf
-Type: string
-Default: ","
-.fi
-.IP
-This variable controls what happens when multiple spam headers
-are matched: if \fIunset\fP, each successive header will overwrite any
-previous matches value for the spam label. If \fIset\fP, each successive
-match will append to the previous, using this variable's value as a
-separator.
-
-
-.TP
-.B spoolfile
-.nf
-Type: mailbox
-Default: ""
-.fi
-.IP
-If your spool mailbox is in a non\-default place where NeoMutt can't find
-it, you can specify its location with this variable. The description from
-"named\-mailboxes" or "virtual\-mailboxes" may be used for the spoolfile.
-.IP
-If not specified, then the environment variables \fC$MAIL\fP and
-\fC$MAILDIR\fP will be checked.
-
-
-.TP
-.B ssl_ca_certificates_file
-.nf
-Type: path
-Default: ""
-.fi
-.IP
-This variable specifies a file containing trusted CA certificates.
-Any server certificate that is signed with one of these CA
-certificates is also automatically accepted. (GnuTLS only)
-.IP
-Example:
-
-.IP
-.EX
-set ssl_ca_certificates_file=/etc/ssl/certs/ca\-certificates.crt
-
-.EE
-
-
-.TP
-.B ssl_ciphers
-.nf
-Type: string
-Default: ""
-.fi
-.IP
-Contains a colon\-separated list of ciphers to use when using SSL.
-For OpenSSL, see ciphers(1) for the syntax of the string.
-.IP
-For GnuTLS, this option will be used in place of "NORMAL" at the
-start of the priority string. See gnutls_priority_init(3) for the
-syntax and more details. (Note: GnuTLS version 2.1.7 or higher is
-required.)
-
-
-.TP
-.B ssl_client_cert
-.nf
-Type: path
-Default: ""
-.fi
-.IP
-The file containing a client certificate and its associated private
-key.
-
-
-.TP
-.B ssl_force_tls
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If this variable is \fIset\fP, NeoMutt will require that all connections
-to remote servers be encrypted. Furthermore it will attempt to
-negotiate TLS even if the server does not advertise the capability,
-since it would otherwise have to abort the connection anyway. This
-option supersedes $ssl_starttls.
-
-
-.TP
-.B ssl_min_dh_prime_bits
-.nf
-Type: number
-Default: 0
-.fi
-.IP
-This variable specifies the minimum acceptable prime size (in bits)
-for use in any Diffie\-Hellman key exchange. A value of 0 will use
-the default from the GNUTLS library. (GnuTLS only)
-
-
-.TP
-.B ssl_starttls
-.nf
-Type: quadoption
-Default: yes
-.fi
-.IP
-If \fIset\fP (the default), NeoMutt will attempt to use \fCSTARTTLS\fP on servers
-advertising the capability. When \fIunset\fP, NeoMutt will not attempt to
-use \fCSTARTTLS\fP regardless of the server's capabilities.
-.IP
-\fBNote\fP that \fCSTARTTLS\fP is subject to many kinds of
-attacks, including the ability of a machine\-in\-the\-middle to
-suppress the advertising of support. Setting $ssl_force_tls is
-recommended if you rely on \fCSTARTTLS\fP.
-
-
-.TP
-.B ssl_use_sslv2
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP , NeoMutt will use SSLv2 when communicating with servers that
-request it. \fBN.B. As of 2011, SSLv2 is considered insecure, and using
-is inadvisable. See https://tools.ietf.org/html/rfc6176 .\fP
-(OpenSSL only)
-
-
-.TP
-.B ssl_use_sslv3
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP , NeoMutt will use SSLv3 when communicating with servers that
-request it. \fBN.B. As of 2015, SSLv3 is considered insecure, and using
-it is inadvisable. See https://tools.ietf.org/html/rfc7525 .\fP
-
-
-.TP
-.B ssl_use_tlsv1
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP , NeoMutt will use TLSv1.0 when communicating with servers that
-request it. \fBN.B. As of 2015, TLSv1.0 is considered insecure, and using
-it is inadvisable. See https://tools.ietf.org/html/rfc7525 .\fP
-
-
-.TP
-.B ssl_use_tlsv1_1
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP , NeoMutt will use TLSv1.1 when communicating with servers that
-request it. \fBN.B. As of 2015, TLSv1.1 is considered insecure, and using
-it is inadvisable. See https://tools.ietf.org/html/rfc7525 .\fP
-
-
-.TP
-.B ssl_use_tlsv1_2
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP , NeoMutt will use TLSv1.2 when communicating with servers that
-request it.
-
-
-.TP
-.B ssl_use_tlsv1_3
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP , NeoMutt will use TLSv1.3 when communicating with servers that
-request it.
-
-
-.TP
-.B ssl_usesystemcerts
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If set to \fIyes\fP, NeoMutt will use CA certificates in the
-system\-wide certificate store when checking if a server certificate
-is signed by a trusted CA. (OpenSSL only)
-
-
-.TP
-.B ssl_verify_dates
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP (the default), NeoMutt will not automatically accept a server
-certificate that is either not yet valid or already expired. You should
-only unset this for particular known hosts, using the
-\fC<account-hook>\fP function.
-
-
-.TP
-.B ssl_verify_host
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-If \fIset\fP (the default), NeoMutt will not automatically accept a server
-certificate whose host name does not match the host used in your folder
-URL. You should only unset this for particular known hosts, using
-the \fC<account-hook>\fP function.
-
-
-.TP
-.B ssl_verify_partial_chains
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-This option should not be changed from the default unless you understand
-what you are doing.
-.IP
-Setting this variable to \fIyes\fP will permit verifying partial
-certification chains, i. e. a certificate chain where not the root,
-but an intermediate certificate CA, or the host certificate, are
-marked trusted (in $certificate_file), without marking the root
-signing CA as trusted.
-.IP
-(OpenSSL 1.0.2b and newer only).
-
-
-.TP
-.B status_chars
-.nf
-Type: character string
-Default: "\-*%A"
-.fi
-.IP
-Controls the characters used by the "%r" indicator in $status_format.
-.RS
-.PD 0
-.TP
-\fBCharacter\fP
-\fBDefault\fP
-\fBDescription\fP
-.TP
-1
-\-
-Mailbox is unchanged
-.TP
-2
-*
-Mailbox has been changed and needs to be resynchronized
-.TP
-3
-%
-Mailbox is read\-only, or will not be written when exiting.
-(You can toggle whether to write changes to a mailbox
-with the \fC<toggle\-write>\fP operation, bound by default
-to "%")
-.TP
-4
-A
-Folder opened in attach\-message mode.
-(Certain operations like composing a new mail, replying,
-forwarding, etc. are not permitted in this mode)
-.RE
-.PD 1
-
-.TP
-.B status_format
-.nf
-Type: string
-Default: "\-%r\-NeoMutt: %D [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]\-\-\-(%s/%S)\-%>\-(%P)\-\-\-"
-.fi
-.IP
-Controls the format of the status line displayed in the "index"
-menu. This string is similar to $index_format, but has its own
-set of \fCprintf(3)\fP\-like sequences:
-.RS
-.PD 0
-.TP
-%b
-*
-Number of mailboxes with new mail
-.TP
-%d
-*
-Number of deleted messages
-.TP
-%D
-
-Description of the mailbox
-.TP
-%f
-
-The full pathname of the current mailbox
-.TP
-%F
-*
-Number of flagged messages
-.TP
-%h
-
-Local hostname
-.TP
-%l
-*
-Size (in bytes) of the current mailbox (see formatstrings-size)
-.TP
-%L
-*
-Size (in bytes) of the messages shown
-(i.e., which match the current limit) (see formatstrings-size)
-.TP
-%m
-*
-The number of messages in the mailbox
-.TP
-%M
-*
-The number of messages shown (i.e., which match the current limit)
-.TP
-%n
-*
-Number of new messages in the mailbox (unread, unseen)
-.TP
-%o
-*
-Number of old messages in the mailbox (unread, seen)
-.TP
-%p
-*
-Number of postponed messages
-.TP
-%P
-
-Percentage of the way through the index
-.TP
-%r
-
-Modified/read\-only/won't\-write/attach\-message indicator,
-According to $status_chars
-.TP
-%R
-*
-Number of read messages in the mailbox (read, seen)
-.TP
-%s
-
-Current sorting mode ($sort)
-.TP
-%S
-
-Current aux sorting method ($sort_aux)
-.TP
-%t
-*
-Number of tagged messages in the mailbox
-.TP
-%u
-*
-Number of unread messages in the mailbox (seen or unseen)
-.TP
-%v
-
-NeoMutt version string
-.TP
-%V
-*
-Currently active limit pattern, if any
-.TP
-%>X
-
-Right justify the rest of the string and pad with "X"
-.TP
-%|X
-
-Pad to the end of the line with "X"
-.TP
-%*X
-
-Soft\-fill with character "X" as pad
-.RE
-.PD 1
-.IP
-For an explanation of "soft\-fill", see the $index_format documentation.
-.IP
-* = can be optionally printed if nonzero
-.IP
-Some of the above sequences can be used to optionally print a string
-if their value is nonzero. For example, you may only want to see the
-number of flagged messages if such messages exist, since zero is not
-particularly meaningful. To optionally print a string based upon one
-of the above sequences, the following construct is used:
-.IP
-\fC%?<sequence_char>?<optional_string>?\fP
-.IP
-where \fIsequence_char\fP is a character from the table above, and
-\fIoptional_string\fP is the string you would like printed if
-\fIsequence_char\fP is nonzero. \fIoptional_string\fP \fBmay\fP contain
-other sequences as well as normal text, but you may \fBnot\fP nest
-optional strings.
-.IP
-Here is an example illustrating how to optionally print the number of
-new messages in a mailbox:
-.IP
-\fC%?n?%n new messages.?\fP
-.IP
-You can also switch between two strings using the following construct:
-.IP
-\fC%?<sequence_char>?<if_string>&<else_string>?\fP
-.IP
-If the value of \fIsequence_char\fP is non\-zero, \fIif_string\fP will
-be expanded, otherwise \fIelse_string\fP will be expanded.
-.IP
-You can force the result of any \fCprintf(3)\fP\-like sequence to be lowercase
-by prefixing the sequence character with an underscore ("_") sign.
-For example, if you want to display the local hostname in lowercase,
-you would use: "\fC%_h\fP".
-.IP
-If you prefix the sequence character with a colon (":") character, NeoMutt
-will replace any dots in the expansion by underscores. This might be helpful
-with IMAP folders that don't like dots in folder names.
-
-
-.TP
-.B status_on_top
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Setting this variable causes the "status bar" to be displayed on
-the first line of the screen rather than near the bottom. If $help
-is \fIset\fP, too it'll be placed at the bottom.
-
-
-.TP
-.B strict_threads
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, threading will only make use of the "In\-Reply\-To" and
-"References:" fields when you $sort by message threads. By
-default, messages with the same subject are grouped together in
-"pseudo threads.". This may not always be desirable, such as in a
-personal mailbox where you might have several unrelated messages with
-the subjects like "hi" which will get grouped together. See also
-$sort_re for a less drastic way of controlling this
-behavior.
-
-
-.TP
-.B suspend
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIunset\fP, NeoMutt won't stop when the user presses the terminal's
-\fIsusp\fP key, usually "^Z". This is useful if you run NeoMutt
-inside an xterm using a command like "\fCxterm \-e neomutt\fP".
-
-
-.TP
-.B text_flowed
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt will generate "format=flowed" bodies with a content type
-of "\fCtext/plain; format=flowed\fP".
-This format is easier to handle for some mailing software, and generally
-just looks like ordinary text. To actually make use of this format's
-features, you'll need support in your editor.
-.IP
-The option only controls newly composed messages. Postponed messages,
-resent messages, and draft messages (via \-H on the command line) will
-use the content\-type of the source message.
-.IP
-Note that $indent_string is ignored when this option is \fIset\fP.
-
-
-.TP
-.B thorough_search
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-Affects the \fC~b\fP and \fC~h\fP search operations described in
-section "patterns". If \fIset\fP, the headers and body/attachments of
-messages to be searched are decoded before searching. If \fIunset\fP,
-messages are searched as they appear in the folder.
-.IP
-Users searching attachments or for non\-ASCII characters should \fIset\fP
-this value because decoding also includes MIME parsing/decoding and possible
-character set conversions. Otherwise NeoMutt will attempt to match against the
-raw message received (for example quoted\-printable encoded or with encoded
-headers) which may lead to incorrect search results.
-
-
-.TP
-.B thread_received
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt uses the date received rather than the date sent
-to thread messages by subject.
-
-
-.TP
-.B tilde
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, the internal\-pager will pad blank lines to the bottom of the
-screen with a tilde ("~").
-
-
-.TP
-.B time_inc
-.nf
-Type: number
-Default: 0
-.fi
-.IP
-Along with $read_inc, $write_inc, and $net_inc, this
-variable controls the frequency with which progress updates are
-displayed. It suppresses updates less than $time_inc milliseconds
-apart. This can improve throughput on systems with slow terminals,
-or when running NeoMutt on a remote system.
-.IP
-Also see the "tuning" section of the manual for performance considerations.
-
-
-.TP
-.B timeout
-.nf
-Type: number
-Default: 600
-.fi
-.IP
-When NeoMutt is waiting for user input either idling in menus or
-in an interactive prompt, NeoMutt would block until input is
-present. Depending on the context, this would prevent certain
-operations from working, like checking for new mail or keeping
-an IMAP connection alive.
-.IP
-This variable controls how many seconds NeoMutt will at most wait
-until it aborts waiting for input, performs these operations and
-continues to wait for input.
-.IP
-A value of zero or less will cause NeoMutt to never time out.
-
-
-.TP
-.B tmpdir
-.nf
-Type: path
-Default: "/tmp"
-.fi
-.IP
-This variable allows you to specify where NeoMutt will place its
-temporary files needed for displaying and composing messages.
-.IP
-If this variable is not set, the environment variable \fC$TMPDIR\fP is
-used. Failing that, then "\fC/tmp\fP" is used.
-
-
-.TP
-.B to_chars
-.nf
-Type: character string
-Default: " +TCFLR"
-.fi
-.IP
-Controls the character used to indicate mail addressed to you.
-.RS
-.PD 0
-.TP
-\fBCharacter\fP
-\fBDefault\fP
-\fBDescription\fP
-.TP
-1
-<space>
-The mail is \fInot\fP addressed to your address.
-.TP
-2
-+
-You are the only recipient of the message.
-.TP
-3
-T
-Your address appears in the "To:" header field, but you are not the only recipient of the message.
-.TP
-4
-C
-Your address is specified in the "Cc:" header field, but you are not the only recipient.
-.TP
-5
-F
-Indicates the mail that was sent by \fIyou\fP.
-.TP
-6
-L
-Indicates the mail was sent to a mailing\-list you subscribe to.
-.TP
-7
-R
-Your address appears in the "Reply\-To:" header field but none of the above applies.
-.RE
-.PD 1
-
-.TP
-.B toggle_quoted_show_levels
-.nf
-Type: number
-Default: 0
-.fi
-.IP
-Quoted text may be filtered out using the \fC<toggle\-quoted>\fP command.
-If set to a number greater than 0, then the \fC<toggle\-quoted>\fP
-command will only filter out quote levels above this number.
-
-
-.TP
-.B trash
-.nf
-Type: mailbox
-Default: ""
-.fi
-.IP
-If set, this variable specifies the path of the trash folder where the
-mails marked for deletion will be moved, instead of being irremediably
-purged.
-.IP
-NOTE: When you delete a message in the trash folder, it is really
-deleted, so that you have a way to clean the trash.
-
-
-.TP
-.B ts_enabled
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Controls whether NeoMutt tries to set the terminal status line and icon name.
-Most terminal emulators emulate the status line in the window title.
-
-
-.TP
-.B ts_icon_format
-.nf
-Type: string
-Default: "M%?n?AIL&ail?"
-.fi
-.IP
-Controls the format of the icon title, as long as "$ts_enabled" is set.
-This string is identical in formatting to the one used by
-"$status_format".
-
-
-.TP
-.B ts_status_format
-.nf
-Type: string
-Default: "NeoMutt with %?m?%m messages&no messages?%?n? [%n NEW]?"
-.fi
-.IP
-Controls the format of the terminal status line (or window title),
-provided that "$ts_enabled" has been set. This string is identical in
-formatting to the one used by "$status_format".
-
-
-.TP
-.B tunnel
-.nf
-Type: command
-Default: ""
-.fi
-.IP
-Setting this variable will cause NeoMutt to open a pipe to a command
-instead of a raw socket. You may be able to use this to set up
-preauthenticated connections to your IMAP/POP3/SMTP server. Example:
-
-.IP
-.EX
-set tunnel="ssh \-q mailhost.net /usr/local/libexec/imapd"
-
-.EE
-.IP
-Note: For this example to work you must be able to log in to the remote
-machine without having to enter a password.
-.IP
-When set, NeoMutt uses the tunnel for all remote connections.
-Please see "account-hook" in the manual for how to use different
-tunnel commands per connection.
-
-
-.TP
-.B tunnel_is_secure
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will assume the $tunnel connection does not need
-STARTTLS to be enabled. It will also allow IMAP PREAUTH server
-responses inside a tunnel to proceed. This is appropriate if $tunnel
-uses ssh or directly invokes the server locally.
-.IP
-When \fIunset\fP, NeoMutt will negotiate STARTTLS according to the
-ssl_starttls and ssl_force_tls variables. If ssl_force_tls is
-set, NeoMutt will abort connecting if an IMAP server responds with PREAUTH.
-This setting is appropriate if $tunnel does not provide security and
-could be tampered with by attackers.
-
-
-.TP
-.B uncollapse_jump
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt will jump to the next unread message, if any,
-when the current thread is \fIun\fPcollapsed.
-
-
-.TP
-.B uncollapse_new
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will automatically uncollapse any collapsed thread
-that receives a new message. When \fIunset\fP, collapsed threads will
-remain collapsed. the presence of the new message will still affect
-index sorting, though.
-
-
-.TP
-.B use_8bitmime
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-\fBWarning:\fP do not set this variable unless you are using a version
-of sendmail which supports the \fC\-B8BITMIME\fP flag (such as sendmail
-8.8.x) or you may not be able to send mail.
-.IP
-When \fIset\fP, NeoMutt will invoke $sendmail with the \fC\-B8BITMIME\fP
-flag when sending 8\-bit messages to enable ESMTP negotiation.
-
-
-.TP
-.B use_domain
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will qualify all local addresses (ones without the
-"@host" portion) with the value of $hostname. If \fIunset\fP, no
-addresses will be qualified.
-
-
-.TP
-.B use_envelope_from
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt will set the \fIenvelope\fP sender of the message.
-If $envelope_from_address is \fIset\fP, it will be used as the sender
-address. If \fIunset\fP, NeoMutt will attempt to derive the sender from the
-"From:" header.
-.IP
-Note that this information is passed to sendmail command using the
-\fC\-f\fP command line switch. Therefore setting this option is not useful
-if the $sendmail variable already contains \fC\-f\fP or if the
-executable pointed to by $sendmail doesn't support the \fC\-f\fP switch.
-
-
-.TP
-.B use_from
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will generate the "From:" header field when
-sending messages. If \fIunset\fP, no "From:" header field will be
-generated unless the user explicitly sets one using the "my_hdr"
-command.
-
-
-.TP
-.B use_ipv6
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will look for IPv6 addresses of hosts it tries to
-contact. If this option is \fIunset\fP, NeoMutt will restrict itself to IPv4 addresses.
-Normally, the default should work.
-
-
-.TP
-.B user_agent
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt will add a "User\-Agent:" header to outgoing
-messages, indicating which version of NeoMutt was used for composing
-them.
-
-
-.TP
-.B vfolder_format
-.nf
-Type: string
-Default: "%2C %?n?%4n/& ?%4m %f"
-.fi
-.IP
-This variable allows you to customize the file browser display for virtual
-folders to your personal taste. This string uses many of the same
-expandos as $folder_format.
-
-
-.TP
-.B virtual_spoolfile
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-When \fIset\fP, NeoMutt will use the first defined virtual mailbox (see
-virtual\-mailboxes) as a spool file.
-.IP
-This command is now unnecessary. $spoolfile has been extended to support
-mailbox descriptions as a value.
-
-
-.TP
-.B visual
-.nf
-Type: command
-Default: "vi"
-.fi
-.IP
-Specifies the visual editor to invoke when the "\fC~v\fP" command is
-given in the built\-in editor.
-.IP
-$visual is overridden by the environment variable \fC$VISUAL\fP or \fC$EDITOR\fP.
-
-
-.TP
-.B wait_key
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-Controls whether NeoMutt will ask you to press a key after an external command
-has been invoked by these functions: \fC<shell\-escape>\fP,
-\fC<pipe\-message>\fP, \fC<pipe\-entry>\fP, \fC<print\-message>\fP,
-and \fC<print\-entry>\fP commands.
-.IP
-It is also used when viewing attachments with "auto_view", provided
-that the corresponding mailcap entry has a \fIneedsterminal\fP flag,
-and the external program is interactive.
-.IP
-When \fIset\fP, NeoMutt will always ask for a key. When \fIunset\fP, NeoMutt will wait
-for a key only if the external command returned a non\-zero status.
-
-
-.TP
-.B weed
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-When \fIset\fP, NeoMutt will weed headers when displaying, forwarding,
-or replying to messages.
-.IP
-Also see $copy_decode_weed, $pipe_decode_weed, $print_decode_weed.
-
-
-.TP
-.B wrap
-.nf
-Type: number
-Default: 0
-.fi
-.IP
-When set to a positive value, NeoMutt will wrap text at $wrap characters.
-When set to a negative value, NeoMutt will wrap text so that there are $wrap
-characters of empty space on the right side of the terminal. Setting it
-to zero makes NeoMutt wrap at the terminal width.
-.IP
-Also see $reflow_wrap.
-
-
-.TP
-.B wrap_headers
-.nf
-Type: number
-Default: 78
-.fi
-.IP
-This option specifies the number of characters to use for wrapping
-an outgoing message's headers. Allowed values are between 78 and 998
-inclusive.
-.IP
-\fBNote:\fP This option usually shouldn't be changed. RFC5233
-recommends a line length of 78 (the default), so \fBplease only change
-this setting when you know what you're doing\fP.
-
-
-.TP
-.B wrap_search
-.nf
-Type: boolean
-Default: yes
-.fi
-.IP
-Controls whether searches wrap around the end.
-.IP
-When \fIset\fP, searches will wrap around the first (or last) item. When
-\fIunset\fP, incremental searches will not wrap.
-
-
-.TP
-.B write_bcc
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-Controls whether NeoMutt writes out the "Bcc:" header when
-preparing messages to be sent. Some MTAs, such as Exim and
-Courier, do not strip the "Bcc:" header; so it is advisable to
-leave this unset unless you have a particular need for the header
-to be in the sent message.
-.IP
-If NeoMutt is set to deliver directly via SMTP(see $smtp_url),
-this option does nothing: NeoMutt will never write out the "Bcc:"
-header in this case.
-.IP
-Note this option only affects the sending of messages. Fcc'ed
-copies of a message will always contain the "Bcc:" header if
-one exists.
-
-
-.TP
-.B write_inc
-.nf
-Type: number
-Default: 10
-.fi
-.IP
-When writing a mailbox, a message will be printed every
-$write_inc messages to indicate progress. If set to 0, only a
-single message will be displayed before writing a mailbox.
-.IP
-Also see the $read_inc, $net_inc and $time_inc variables and the
-"tuning" section of the manual for performance considerations.
-
-
-.TP
-.B x_comment_to
-.nf
-Type: boolean
-Default: no
-.fi
-.IP
-If \fIset\fP, NeoMutt will add "X\-Comment\-To:" field (that contains full
-name of original article author) to article that followuped to newsgroup.
-
-
-.\" -*- nroff -*-
-.\" --------------------------------------------------------------------
-.SH SEE ALSO
-.\" --------------------------------------------------------------------
-.PP
-.\" sorted by category and name
-.BR iconv (1),
-.BR neomutt (1),
-.BR notmuch (1),
-.BR iconv (3),
-.BR printf (3),
-.BR strftime (3),
-.BR mailcap (5),
-.BR maildir (5),
-.BR mbox (5),
-.BR regex (7).
-.
-.PP
-For further NeoMutt information:
-.RS 4
-.TP
-.RI "\(bu the full manual, " "/usr/share/doc/neomutt/manual." { html , pdf , txt }
-.TQ
-\(bu the home page, <https://neomutt.org>
-.RE
-.
-.\" --------------------------------------------------------------------
-.SH AUTHOR
-.\" --------------------------------------------------------------------
-.PP
-Michael Elkins, and others. Use <neomutt-devel@\:neomutt.org> to contact the
-developers.
-.
diff --git a/neomutt/manifest b/neomutt/manifest
@@ -1,10 +1,6 @@
/var/db/kiss/installed/neomutt/version
/var/db/kiss/installed/neomutt/sources
-/var/db/kiss/installed/neomutt/post-install
/var/db/kiss/installed/neomutt/manifest
-/var/db/kiss/installed/neomutt/files/neomuttrc.5
-/var/db/kiss/installed/neomutt/files/neomutt.1
-/var/db/kiss/installed/neomutt/files/
/var/db/kiss/installed/neomutt/etcsums
/var/db/kiss/installed/neomutt/depends
/var/db/kiss/installed/neomutt/checksums
@@ -40,6 +36,9 @@
/usr/share/doc/neomutt/samples/Pine.rc
/usr/share/doc/neomutt/samples/Mush.rc
/usr/share/doc/neomutt/samples/
+/usr/share/doc/neomutt/oauth2/mutt_oauth2.py.README
+/usr/share/doc/neomutt/oauth2/mutt_oauth2.py
+/usr/share/doc/neomutt/oauth2/
/usr/share/doc/neomutt/lua/test_lua-api_spec.lua
/usr/share/doc/neomutt/lua/test_lua-api_runner.neomuttrc
/usr/share/doc/neomutt/lua/
diff --git a/neomutt/sources b/neomutt/sources
@@ -1,3 +1 @@
-https://github.com/neomutt/neomutt/archive/refs/tags/20210205.tar.gz
-files/neomutt.1 docs/
-files/neomuttrc.5 docs/
+https://github.com/neomutt/neomutt/archive/refs/tags/20211015.tar.gz
diff --git a/neomutt/version b/neomutt/version
@@ -1 +1 @@
-20210205 1
+20211015 1
